Ninja BL450SM Series User manual

www.ninjakitchen.sg | www.ninjakitchen.my
BL450SM
Series
OWNER’S GUIDE

2 3
SG +65 800 120 5111 | MY +60 1800 803 915
ninjakitchen.sg | ninjakitchen.my
WARNING
To reduce the risk of fire, electric shock,
serious injury, death, or damage when using
this appliance, follow these basic safety
precautions.
1. Read all instructions prior to using the
appliance and its accessories.
2. Carefully observe and follow all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3. ALWAYS exercise care when handling
the Pro Extractor Blades™ Assembly.
The blades are sharp. ONLY grasp the
Pro Extractor Blades Assembly by the
outer perimeter of the blade assembly
base. Failure to use care when handling
the blade assembly will result in a risk of
laceration.
4. Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades
that can cause injury if mishandled.
5. Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
6. Turn the appliance OFF, then unplug the
appliance from the outlet when not in
use, before assembling or disassembling
parts, and before cleaning. To unplug,
grasp the plug by the body and pull from
the outlet. NEVER unplug by grasping
and pulling the flexible cord.
7. Before use, wash all parts that
may contact food. Follow washing
instructions covered in this instruction
manual.
8. Blades are sharp. Handle carefully.
9. To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
10. DO NOT use this appliance outdoors. It is
designed for indoor household use only.
11. DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped
or damaged in any manner. This
appliance has no user-serviceable parts.
If damaged, contact Ninja Kitchen for
servicing.
12. DO NOT abuse the power cord. Never
carry the appliance by the power cord
or yank it to disconnect from electrical
outlet; instead grasp the plug and pull to
disconnect.
13. Extension cords should NOT be used
with this appliance.
14. DO NOT allow children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
15. This appliance is NOT intended to be
used by people with reduced physical,
sensory, or mental capabilities, or lack
of experience and knowledge, unless
they are given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
16. Before each use, inspect blade
assemblies for damage. If a blade is
bent or damage is suspected, contact
SharkNinja to arrange for replacement.
17. DO NOT attempt to sharpen blades.
18. Keep the appliance and its cord out of
reach of children.
19. DO NOT allow the unit or the cord
to hang over the edges of tables or
counters. The cord may become snagged
and pull the appliance o the work
surface.
20. DO NOT allow any part of the unit to
contact hot surfaces, including stoves
and other heating appliances.
21. ALWAYS use the appliance on a dry and
level surface.
22.NEVER place a blade assembly on
the motor base without it first being
attached to its corresponding container
(bowl, pitcher, cup) and lid.
23. ONLY use attachments and accessories
that are provided with the product or
are recommended by Ninja Kitchen. The
use of attachments not recommended
or sold by Ninja Kitchen may cause fire,
electric shock, or injury.
24.The use of attachments, including
canning jars, not recommended by the
manufacturer may cause a risk of injury
to persons
25.DO NOT use stainless steel cup
accessory model XSKDWSS24 with
blender.
26.During operation and handling of the
appliance, avoid contact with moving
parts.
27.DO NOT operate the appliance with an
empty container.
28.DO NOT fill containers past the MAX
FILL or MAX LIQUID lines.
29.DO NOT microwave any containers or
accessories provided with the appliance.
30. DO NOT perform grinding operations
with the Single-Serve Blending Cup and
Pro Extractor Blades™ Assembly.
31. Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
32.Keep hands, hair, clothing, as well as
utensils out of container while processing
to reduce the risk of severe injury to
persons or damage to the appliance. A
scraper may be used but only when the
appliance is not running.
33.NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are properly
installed before operation.
34.DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
35.NEVER leave the appliance unattended
while in use.
36.DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk of the user
being burned.
37.DO NOT remove the cup from the motor
base while the appliance is running.
38.Remove the Pro Extractor Blades™
Assembly from the Nutri Ninja cup upon
completion of blending. Do not store
ingredients before or after blending
them in the cup with the blade assembly
attached. Some foods may contain
active ingredients or release gases
which will expand if left in a sealed
container, resulting in excessive pressure
buildup that can pose a risk of injury. For
ingredient storage in the cup, use only
spout lid to cover.
39.The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades Assembly
and Single-Serve Blending Cup. Other
configurations may draw less power or
current.
40.Max ON time is 1 minute under 900W
load. If the appliance overheats, a
thermal switch will become activated
and shut o the motor. To reset, unplug
the appliance and let it cool down for
approximately 30 minutes before using
again.
41. DO NOT process dry ingredients
without adding liquid to the Single Serve
Blending Cup. The Single-Serve Blending
Cup is not intended for dry blending.
42. To protect against electrical shock, do
not submerge the appliance or allow the
power cord to come into contact with
water or any other liquid.
43. DO NOT spray the motor base with any
liquids. Turn o and unplug the motor
base before cleaning.
44. Keep the appliance and its cord out of
reach of children.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
Read all instructions before using your NUTRI NINJA™ PRO
When using electrical appliances, basic safety precautions should always be
followed, including the following:

Thank you for
purchasing the
Nutri Ninja™
Pro Blender
Contents
THIS BOOK COVERS MODEL NUMBERS:
BL450SM
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Power: 900 Watts
Nutri Ninja™Cup Capacity: 500ml
650ml
Getting to Know Your Nutri Ninja Pro Blender �����������������������������������������������������������������������5
Before First Use ����������������������������������������������������������������������������������������������������������������7
Use of the Nutri Ninja Cups�������������������������������������������������������������������������������������������������8
Suggested Uses�����������������������������������������������������������������������������������������������������������������9
Care & Maintenance ��������������������������������������������������������������������������������������������������������10
Troubleshooting Guide������������������������������������������������������������������������������������������������������11
Getting To Know Your Nutri Ninja™Pro Blender
cPro Extractor Blades™Assembly
dSpout Lid
eMotor Base
a650 ml Nutri Ninja Cup
b500 ml Nutri Ninja Cup
c
e
d
a
b
4 5
SG +65 800 120 5111 | MY +60 1800 803 915
ninjakitchen.sg | ninjakitchen.my

The Nutri Ninja™Pro Blender is a high powered innovative tool with a compact design and outstanding performance� It
is perfect for ice crushing, chopping, blending, and nutrient and vitamin extraction*� Blend and go with the convenient
Spout lids, create delicious drinks to get you out the door quickly! Best results are achieved when you Pulse�
FEATURES:
• Nutrient & Vitamin Extraction*
• 900 Watt Motor
• Personalised, healthy drinks and juices on the go
• Spout Lids for drinks on the go
• Nutri Ninja Cups, BPA free
• Cord storage
*Extract a nutritious drink containing vitamins and nutrients from fruits and vegetables�
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base is
plugged in for use.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it may
result in damage to the accessories.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1Remove all packaging material and labels from the
appliance�
Separate/remove all parts from each other�
2Wash the lids, Nutri Ninja™cups, Pro Extractor Blades™
Assembly in warm, soapy water� When washing the Pro
Extractor Blades Assembly, use a dish-washing utensil
with a handle to avoid direct hand contact with blades�
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp.
3Rinse and air dry thoroughly�
4 The lids, Nutri Ninja cups, Pro Extractor Blades
Assembly are all dishwasher safe� It is recommended
that the lids and Pro Extractor Blades Assembly be
placed on the top rack� Ensure that the Pro Extractor
Blades Assembly are removed from the containers
before placing in the dishwasher�
5Wipe the motor base clean with a damp cloth�
6 7
SG +65 800 120 5111 | MY +60 1800 803 915
ninjakitchen.sg | ninjakitchen.my

1 Review warning and caution statements above before
proceeding�
2Place the motor base on a clean, dry, level surface such
as a counter or table top�
3Make sure that the motor base is plugged in for use�
4 Add ingredients to the cup�
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line�
5Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal� (Fig. 1)
6Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base�
Turn it clockwise, the unit is ready for use� (Fig. 2)
7Press down on the top of the cup in short intervals to
activate� (Fig. 3)
8When you have reached your desired consistency, stop
the appliance by removing your hand from the cup�
Use of the Nutri Ninja™Cups
9 To remove the cup, ensure that the motor has stopped
running� Then turn the cup anticlockwise (Fig. 4) and
pull straight up to remove� (Fig. 5)
10 Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly anticlockwise� (Fig. 6)
11 Do not store blended contents with the Pro Extractor
Blades Assembly attached�
12 Place the Spout lid onto the Nutri Ninja cup, twist to
seal and enjoy�
13 For storage, only use Spout lid to cover�
14 Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use�
15 Make sure that the motor base is unplugged when not
in use�
16 To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups�
Fig. 3 Fig. 4 Fig. 5
ASSEMBLY PULSE REMOVAL
Fig. 2Fig. 1
or or
Fig. 6
or or
WARNING: Handle the Pro Extractor Blades™Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not store
ingredients before or after blending in the Nutri Ninja
™
cup with the blade assembly attached. Some foods may
contain active ingredients or release gases which will expand if left in a sealed container, resulting in excessive
pressure buildup that can pose a risk of injury. For storage, only use Spout Lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
For best results, use short “PULSES”!
Suggested Uses
PURPOSE / FUNCTION SUGGESTED CUP TYPE OF FOOD
Chopping / Pulsing 500ml Nutri Ninja™cup
650ml Nutri Ninja cup
Salsa
Leafy Herbs
Nuts
Chocolate
Grating 500ml Nutri Ninja cup
650ml Nutri Ninja cup
Cheese
Breadcrumbs
Mixing 500ml Nutri Ninja cup
650ml Nutri Ninja cup
Batters
Dips
Sauces* 500ml Nutri Ninja cup
650ml Nutri Ninja cup
Vinaigrettes
Salad Dressings
Simple Sauces*
Frozen Blending 500ml Nutri Ninja cup
650ml Nutri Ninja cup
Ice
Frozen Fruit
Ice Cream
Nutrient Juices/Smoothies 500ml Nutri Ninja cup
650ml Nutri Ninja cup
Fruits
Vegetables
Leafy Greens
FILLING YOUR NUTRI NINJA™
Want to create smooth and delicious drinks using your Nutri Ninja cups? Simply
add ingredients to the container in the order they appear in each recipe, or follow
the guideline below when creating your own customised recipes� (Fig. 1)
fresh fruits,
vegetables
leafy greens,
herbs
powders,
nut butters
ice,
frozen ingredients
liquids, yoghurt
Fig. 1
CAUTION: DO NOT process dry ingredients without adding liquid to the cup. This product is not intended for
dry blending.
* When blending sauces, make sure they’re cooled to room temperature first - Ninja™containers are not intended for hot
blending�
8 9
SG +65 800 120 5111 | MY +60 1800 803 915
ninjakitchen.sg | ninjakitchen.my

Care & Maintenance Troubleshooting Guide
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor doesn’t start or blade
assembly doesn’t rotate.
• For the cups, make sure that the tabs are seated in the slots and
turned clockwise�
Food is unevenly chopped.
• Either you are chopping too much food at once, or you are not pulsing
properly� Reduce the amount of food in the cup�
Food is too finely chopped or
too watery.
• The food has been over processed� Use short pulses for best results�
Press down on the cup in short intervals�
You cannot achieve snow
from ice cubes.
• For best results use ice straight from the freezer� Try using short pulses
instead of one long one�
• Make sure the cup is completely dry before adding ice�
Cup is leaking.
• Make sure that your lid or blade assembly is properly assembled to the
cup� Leaking may occur if it is misaligned when twisted onto the cup�
Turn the lid tightly clockwise�
Unit doesn’t turn on.
• Make sure the unit is plugged in�
• Rotate and press down on the cup to turn the unit on�
• Make sure the blade assembly is properly assembled to the cup and that
it is not misaligned�
Unit doesn’t turn off. • Unplug the power cord from the electrical outlet and call customer
service for support�
Doesn’t mix well.
• Pulse ingredients for best results� Press down on the cup in short
intervals for even blending and chopping� For frozen ingredients, pulse in
short intervals of 2-5 seconds and repeat�
Lid/blade assembly will not
properly align to the cup.
• Set the cup on a level surface� Place the lid or blade assembly on top of
the cup and align the threads so that the lid/blades sit flat on the cup�
Twist clockwise so that the lid/blades evenly align to the cup until you
have a tight seal�
HOW TO STORE
1Store the Nutri Ninja Pro Blender upright with the blade
assembly attached to the Nutri Ninja Cup� Do not place
anything on top� Store the rest of the attachments in a
safe place where they will not be damaged and won’t
cause harm� Loosely wrap the power cord around the
cord wrap�
NOTE: Do not store blended or unblended ingredients
in the Nutri Ninja cup with the blade assembly attached�
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja Pro Blender features a unique safety
system which prevents damage to the unit’s motor
and drive system should you inadvertently overload
your appliance� If the appliance is being overloaded,
the motor will stop� To reset the appliance, follow the
resetting procedure below:
1Unplug the appliance from the electrical outlet�
2Remove and empty the cup and ensure that no food is
jamming the
Pro Extractor Blades Assembly
�
3Allow the appliance to cool for approximately 30 minutes�
4Re-install the cup onto the base and re-plug the
appliance into the electrical outlet�
5Proceed to use the appliance as before while making sure
not to exceed the recommended maximum capacities�
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1Separate/remove all parts from each other�
2Hand Washing: Wash lids, Nutri Ninja
™
cups and Pro
Extractor Blades
™
Assembly in warm, soapy water�
When washing the Pro Extractor Blades Assembly,
use
a dish-washing utensil with a handle to avoid direct
hand contact with blades� Handle Pro Extractor Blades
Assembly with care to avoid contact with sharp edges�
Rinse and air dry thoroughly�
Dishwasher: Containers, lids, and Pro Extractor
Blades Assembly are all dishwasher safe� The lids
and blade assemblies are top rack dishwasher safe�
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher�
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.
3Wipe the motor base clean with a damp cloth
�
If the appliance needs servicing, please call customer
service at SG +65 800 120 5111 or MY +60 1800
803 915�
10 11
SG +65 800 120 5111 | MY +60 1800 803 915
ninjakitchen.sg | ninjakitchen.my

Illustrations may dier from actual product. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change withoutnotice.
NINJA, NUTRI NINJA, PRO EXTRACTOR BLADES, and SHARKNINJA,
are
trademarks of
SharkNinja Operating LLC.
is a
trademark of SharkNinja Operating LLC.
For SharkNinja U.S. patent information, visit sharkninja.com/uspatents
© 2019 SharkNinja Operating LLC
PRINTED IN CHINA
BL450SM_Series_30_IB_Mv1
Proudly distributed by
Mann&Noble Asia Pte Ltd
600 North Bridge Rd.,
#23-01 Parkview Square, Singapore 188778
Table of contents
Other Ninja Blender manuals

Ninja
Ninja BL660Q series User manual

Ninja
Ninja BL770NZ User manual

Ninja
Ninja BL450 User manual

Ninja
Ninja NINJA 1100 User manual

Ninja
Ninja Ultima BL820NZ User manual

Ninja
Ninja Pulse BL203Q Series User manual

Ninja
Ninja BL640 User manual

Ninja
Ninja QB1001QUK User manual

Ninja
Ninja BL642Z User manual

Ninja
Ninja BL663 User manual

Ninja
Ninja HB150UK Series User manual

Ninja
Ninja Intelli-Sense CT680 User manual

Ninja
Ninja BL773CO Mega Kitchen System User manual

Ninja
Ninja BN800UK User manual

Ninja
Ninja Ninja Pulse BL204 User manual

Ninja
Ninja BL688Q User manual

Ninja
Ninja BL682QBK User manual

Ninja
Ninja Foodi CB350EU User manual

Ninja
Ninja CT682ANZ User manual

Ninja
Ninja Single Serve System Pulse BL100 User manual