Ninja CREAMi Breeze NC100 Series User manual

Quick start guide
Please make sure to read the enclosed safety instructions prior to using your unit.
SCAN & WATCH
HOW IT WORKS
ninjacreami.com
™
NOTE: Unit color, pint quantity, and
programs may vary by model.

INGREDIENTS
1 tablespoon (1/2ounce) cream cheese
1/3cup granulated sugar
3/4cup heavy cream
Flavoring, 1 teaspoon extract of your choice
OR 2 tablespoons of cocoa powder
1 cup whole milk
1/4cup of your favorite mix-ins (optional)
PICK YOUR MIX-INS TO ADD A PERSONAL TOUCH
Perfectly personalized ice cream
PREP: 5 minutes | FREEZE: 24 hours | PROGRAM TIME: 1 1/2minutes | MAKES: 4 servings
Microwave the cream
cheese for 10 seconds.
Add sugar and flavor,
then whisk the mixture
until it looks like frosting.
Slowly mix in heavy
cream and milk until
sugar is dissolved.
Pour base into
CREAMi Breeze™Pint.
Place storage lid on
pint and freeze for
24 hours.
Remove storage lid
from frozen pint.
Refer to next page for
Assembly & process
instructions.
Select ICE CREAM.
With a spoon, create a 1 1/2-inch
wide hole that reaches the
bottom of the pint.
Add mix-ins to the hole in the
pint and process again using
the MIX-IN program.
1/4cup of your favorite crushed candies, frozen fruits, chopped nuts,
chocolate pieces, and more.
PICK YOUR FLAVOR
Vanilla extractCocoa powder Mint extract Fruit extract
Almond extract
2.
Prepare
CREAMi
Breeze™ Pint
Remove storage lid from
frozen CREAMi Breeze
Pint and check that the
ingredients have not been
frozen at an angle.
4.
Install
Processing Lid
Position the processing lid
on top of the CREAMi Breeze
Pint. Twist the lid clockwise
to secure pint. This can be
verified by ensuring that the
arrow on the processing lid
is aligned with one of the
arrows on the pint.
Assembly & process
5.
Install CREAMi Breeze Pint
Insert the CREAMi Breeze Pint into
the motor base. Rotate clockwise
to lock, until you hear a click.
1.
Plug in
unit first
The unit will not run
if the CREAMi Breeze
Pint is installed
before the unit
is plugged in.
6.
Select program
Press the power button,
then press the program
that suits your recipe.
7.
Remove CREAMi Breeze Pint
When the program ends,
press the release button on
the front of the motor base to
remove the CREAMi Breeze Pint.
8.
Remove
Processing Lid
Rotate processing lid
counterclockwise
to separate from
CREAMi Breeze Pint.
Release Button
To remove the pint,
press and hold
release button.
If adding mix-ins, use a
spoon to create a 1 1/2-inch
wide hole that reaches the
bottom of the pint.
Add chopped or broken
mix-ins to the hole in the
pint and process again
using the MIX-IN program.
If not adding mix-ins,
RE-SPIN can be used on
a crumbly or powdery
pint to make it creamy.
RE-SPIN is often needed
for very cold bases.
Do not RE-SPIN before
using MIX-IN program.
OR
If the install light is blinking and the power light is solid, make sure the pint is properly installed,
and the lid is fully secured. This can be verified by ensuring that the arrow on the processing lid
is aligned with one of the arrows on the pint. If both the power light and install light are flashing,
make sure the paddle is installed in the processing lid.
NOTE
SCAN & WATCH
HOW IT WORKS
ninjacreami.com
MAKE IT DAIRY-FREE Use vegan cream cheese for cream cheese, unsweetened coconut cream
for heavy cream, and unsweetened oat milk for milk. Whisk the coconut cream until smooth,
then add the remaining ingredients.
9.
3.
Install
Creamerizer™ Paddle
Press and hold the paddle
latch on the top of the
processing lid, then insert
the paddle in the bottom of
the processing lid. Release the
latch to secure the paddle.

© 2023 SharkNinja Operating LLC.
NINJA is a registered trademark of SharkNinja Operating LLC.
CREAMI BREEZE and CREAMERIZER are trademarks of SharkNinja Operating LLC.
NC100Series_QSG_MP_Mv8
Disassembly & cleaning
Remove pint, processing lid & paddle
When the program ends, press the release button on the front of the
motor base to remove the CREAMi Breeze™ Pint. Untwist processing lid
from the CREAMi Breeze Pint and rinse the processing lid to remove any
sticky residue or pieces wedged in the paddle. Then remove the paddle
by sliding the paddle latch on the top of the processing lid.
All parts are dishwasher safe (top rack only and should NOT be cleaned
with a heated dry cycle) and can also be hand-washed. Ensure the paddle,
pint, processing lid, and storage lid are all separated before placing them in
the dishwasher. The processing lid should be placed down horizontally.
CREAMi Breeze™
Pints & Lids
BPA-free pints and lids
for making and storing
CREAMi treats.
Processing Lid
Locks Creamerizer
Paddle in place.
Creamerizer™Paddle
This dual-functioning paddle finely
shaves and mixes frozen ingredients
into the creamiest treats.
GET HELP RIGHT NOW!
DON'T RETURN TO THE STORE.
Questions or Problems?
CALL US: 1-877-646-5288
Toll-free customer support line
Scan the code for
online help, FAQs,
and How-To Videos.
Ninjacreami.com
NOTE: Unit color and programs may vary by model.
OR