Ninja CREAMi DELUXE User manual

CREAMi® DELUXE
CN501CO | Owner’s Guide
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions
must always be followed, including the following numbered warnings and subsequent
instructions. Do not use appliance for other than intended use.
1 Read all instructions prior to using the appliance and its accessories.
2 Carefully observe and follow all warnings and instructions. This unit contains electrical connections
and moving parts that potentially present risk to the user.
3 Take inventory of all contents to ensure you have all parts needed to properly and safely operate
your appliance.
4 Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before
assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and
pull from the outlet. NEVER unplug by grasping and pulling the flexible cord.
5Before use, wash all parts that may contact food. Follow washing instructions covered in this
instruction manual.
6Before each use, inspect Deluxe Creamerizer™ Paddle for damage. If paddle is bent or damage is
suspected, contact a service center.
7 DO NOT use this appliance outdoors. It is designed for indoor household use only.
8 This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
9 DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is
dropped or damaged in any manner. Contact a service center.
10 This appliance has important markings on the plug. The entire supply cord is not suitable for
replacement. If damaged, please contact a service center.
11 Extension cords should NOT be used with this appliance.
12 To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power cord
to contact any form of liquid.
13 DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged
and pull the appliance o the work surface.
14 DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.
15 ALWAYS use the appliance on a dry and level surface.
16 DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when
any appliance is used near children.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death, or substantial property damage if
the warning included with this symbol is ignored.
For indoor and household use only.
When using electrical appliances, basic safety precautions should always be followed, including the following:
RECIPE BOOK NOT INCLUDED

17 This appliance is NOT intended to be used by people with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
18 ONLY use attachments and accessories that are provided with the product or are recommended by
SharkNinja. The use of attachments not recommended or sold by SharkNinja may cause fire, electric
shock, or injury.
19 NEVER place the Deluxe Creamerizer™ Paddle on the motor base without it first being attached to
the outer bowl lid and the lid being attached to the outer bowl.
20 Keep hands, hair, and clothing out of the container when loading and operating.
21 During operation and handling of the appliance, avoid contact with moving parts.
22 DO NOT fill containers past the MAX FILL lines.
23 DO NOT operate the appliance with an empty container.
24 DO NOT microwave the containers or accessories provided with the appliance, except the CREAMi®
Deluxe Pint. The pint can be microwaved.
25 DO NOT microwave the pint for more than 8 minutes at a time. Wait until cooled before microwaving again.
26 NEVER leave the appliance unattended while in use.
27 DO NOT mix hot liquids. Doing so may result in pressure buildup and steam exposure that can pose a
risk of the user being burned.
28 DO NOT process dry ingredients without adding liquid to the pint. It is not intended for dry blending.
29 DO NOT perform grinding operations.
30 NEVER operate the appliance without lids in place. DO NOT attempt to defeat the interlock
mechanism. Ensure the container and lid are properly installed before operation.
31 Before operation, ensure all utensils are removed from containers. Failure to remove utensils can cause
containers to shatter and potentially result in personal injury and property damage.
32 Keep hands and utensils out of containers while mixing to reduce the risk of severe personal injury or
damage to the unit. A scraper may be used ONLY when the processor is not running.
33 DO NOT carry the unit by the handle of the outer bowl. Hold the unit by grasping both sides of the
unit under the head.
34 DO NOT process hard, loose ingredients or ice. This appliance is not intended to process loose frozen
fruit, a block of solid ice, or ice cubes.
35 DO NOT freeze the pint at an angle. Pints must be placed on a level surface in the freezer. Pints frozen
at an angle should NOT be processed.
36 The maximum rating wattage can be achieved with the following recipe: Set the freezer to -16°C and
let the freezer stabilize. Whisk 1 box of instant chocolate pudding powder (165 grams) with 3 cups of
milk for 2 minutes. Pour base into an empty CREAMi® Deluxe Pint up to the MAX FILL line. Place the
pint in the freezer for 17.5 hours. Process the base using the RE-SPIN program.
PARTS
AMotor Base (attached power cord not shown)
BOuter Bowl Lid
CDeluxe Creamerizer™ Paddle
DCREAMi® Deluxe Lid
EREAMi Deluxe Pint
FOuter Bowl
NOTE: Unit color, number of pints, and programs
may vary by model.
A
F
E
D
B
C
DID YOU KNOW?
You can use the outer bowl to carry the CREAMi Deluxe Pint after removing it from the freezer.
1 Remove all packaging materials from the unit.
2 Wash containers, lids, and paddle in warm, soapy water. Use a dishwashing utensil with a handle to
clean the paddle.
3 Thoroughly rinse and air-dry all parts.
4 Wipe control panel with a soft cloth.
BEFORE FIRST USE
IMPORTANT: Review all warnings before proceeding.
NOTE: All attachments are BPA free. Accessories are top-rack dishwasher safe and should NOT
be cleaned with a heated dry cycle. Ensure the paddle, pint, outer bowl, and lids are all separated
before placing in the dishwasher.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

FEATURES
Use the Power button to turn the unit on or o.
FREEZING TIPS
IMPORTANT: Review all warnings before proceeding.
1Add ingredients to the CREAMi Deluxe Pint. DO NOT add ingredients
past the MAX FILL line. For recipe inspiration, choose from hundreds of
recipes at ninjacreami.com.
NOTE: The unit must be plugged in before assembly. The unit will not run if the outer bowl is installed
before the unit is plugged in.
2If the recipe requires the ingredients to be frozen, snap the lid on the
Deluxe Pint and freeze for at least 24 hours.
3Plug in the unit and place on a clean, dry, level surface such as a countertop
or table.
4When the base is prepped or frozen, remove the Deluxe Pint lid and place
the Deluxe Pint in the outer bowl.
For best results, set your freezer between 9°F and -7°F. The CREAMi® Deluxe is designed to
process bases within this range. If your freezer is within this range, your pint should reach the
appropriate temperature.
DO NOT freeze the Deluxe Pint at angle. Place the Deluxe Pint on a level surface in the freezer.
Upright freezers work best. A chest freezer is not recommended, as they tend to reach extremely
cold temperatures.
Freeze the base for at least 24 hours. While it may be frozen, the base needs to reach an even
colder temperature before it can be processed.
Make the most of your time by prepping several CREAMi Deluxe Pints at once. Keep these Deluxe
Pints in your freezer to Creamify™ on demand whenever the craving strikes.
NOTE: DO NOT process the Deluxe Pint if ingredients have been frozen at an angle or if the
Deluxe Pint has been scooped out of and then refrozen unevenly.
Always smooth out the surface of a processed treat before refreezing. If frozen unevenly,
put the Deluxe Pint in the fridge to allow the ingredients to melt. Then whisk to combine
ingredients. Refreeze, ensuring to place the Deluxe Pint on a level surface in the freezer.
USING THE CREAMi DELUXE
ONE-TOUCH PROGRAMS
Each One-Touch Program is intelligently designed to whip up delicious creations. Programs vary in length
and speed depending on the optimal settings to get perfectly creamy results for that type of recipe.
INSTALL LIGHT
Light will illuminate when unit is not fully assembled for use. If light
is blinking, ensure the bowl is properly installed. If light is solid, check
that the paddle is installed.
COUNTDOWN TIMER
Counts down remaining program time.
ENJOY LIGHT
When processing is complete, light will illuminate.
PROCESSING MODE
Select processing mode prior to selecting a program. To process the
whole Deluxe Pint, press FULL. To process just the top half, press TOP.
To process the remaining half of the Deluxe Pint, press BOTTOM.
NOTE: To stop an active program, press the dial again.
SCOOPABLE PROGRAMS
ICE CREAM
Designed for traditionally indulgent recipes. Great
for turning dairy and dairy-alternative recipes
into thick, creamy, and scoopable ice creams.
LITE ICE CREAM
Designed for health-conscious consumers to
make ice creams that are low in sugar or fat or
use sugar substitutes. Choose when processing
keto or paleo recipes.
SORBET
Transform fruit-based recipes with high water
and sugar content into creamy delights.
GELATO (not available on all models)
Creates custard bases for Italian-style ice cream.
FROZEN YOGURT
Easily transform your favorite store-bought
yogurts into healthy, creamy frozen treats with
the touch of a button. When making frozen
yogurt, ensure you are using full-fat yogurt with
added sugar. Do not process nonfat yogurt or
yogurt with no added sugar in the unit.
DRINKABLE PROGRAMS
CREAMICCINO™ (not available on all models)
Create coeehouse-quality frozen coee drinks
with your preferred coee and sugar, along with
any creamer, milk, or milk alternative you desire.
FROZEN DRINK
Make thicker, smoother, slower-melting frozen
beverages that go beyond resort-style quality.
SLUSHI
Recreate a favorite childhood treat by turning
water and powdered drink mixes or syrups into
silky-smooth, sippable slushies.
MILKSHAKE
Designed to create quick and thick milkshakes by
combining your favorite ice cream (store bought
or homemade), milk, and mix-ins.
ITALIAN ICE
Designed to transform water and your favorite
fruity flavors into refreshing scoops of Italian ice.
MIX-IN
Designed to fold in pieces of candies, cookies, nuts, cereal, or frozen fruit to customize a just-processed
base or store-bought treat.
RE-SPIN
Designed to ensure a smooth texture after running one of the preset programs. RE-SPIN is often needed
when the base is very cold (below -7°F) and the texture is crumbly rather than creamy.
NOTE: Do not RE-SPIN before using the MIX-IN program.
NOTE: Mix-ins work best if they are added in the middle of the Deluxe Pint. After processing, use a spoon
to create a 1 1/2-inch-wide hole that reaches the bottom of the processed portion of the Deluxe Pint.
Add chopped or broken mix-ins to the hole and process again using the MIX-IN program.
Don’t want to wait 24 hours? Customize store-bought ice cream with mix-ins or make a milkshake.
To customize store-bought ice cream, scoop the ice cream into a Deluxe Pint and skip to step 11a in the
Using the Creami Delux section.
This is NOT a blender.
DO NOT process a solid block of ice or ice cubes.
DO NOT make a smoothie or process hard, loose ingredients.
Fruit must be crushed to release its juice or combined with other ingredients and frozen before processing.
NOTE: TOP and BOTTOM modes are not available with
DRINKABLE programs.

P
A
D
D
L
E
R
E
L
E
A
S
E
NOTES:
• TOP and BOTTOM modes are not available with DRINKABLE programs.
• If the install light is illuminated, the unit is not fully assembled for use. If the light is blinking, ensure
the bowl is properly installed. If the light is solid, check that the paddle is installed. Ensure to plug
the unit in before installing the bowl.
6Position the tab of the lid just slightly to the right of the outer bowl handle
so the lines on the lid and handle align. Rotate the lid clockwise to lock.
7With the unit plugged in, place the outer bowl onto the motor base with
the handle centered below the control panel. Twist the handle to the right
to raise the platform and lock the bowl in place, signaled by a click.
5Press and hold the paddle latch on the top of the outer bowl lid, then insert
the Deluxe Creamerizer™ Paddle in the bottom of the lid. Release the latch
to secure the paddle. When fully installed, the latch will be centered and the
paddle will be slightly loose.
USING THE CREAMi® – CONT
9When program is complete, remove the outer bowl by holding the bowl
release button on the left side of the motor base and twisting the handle
back to the center. As the handle is twisted, the platform will lower the
bowl. Pull the bowl straight back toward you to remove.
11a If adding mix-ins, use a spoon to create a 1 1/2-inch-wide hole that reaches
the bottom of the processed portion of the Deluxe Pint. Add chopped
or broken mix-ins to the hole in the Deluxe Pint and repeat steps 6–10 to
process again using the same processing mode and the MIX-IN program.
11b If not adding mix-ins, RE-SPIN can be used on a crumbly or powdery Deluxe
Pint to make it more creamy. RE-SPIN is often needed for very cold bases.
If the treat is smooth and scoopable, go to step 12. If the base is crumbly or
powdery, repeat steps 6–10 to process again using the RE-SPIN program.
NOTE: Do not RE-SPIN before using the MIX-IN program.
NOTE: The unit does not allow One-Touch Programs to be run back to back. Between programs,
lower the bowl and check the results before proceeding.
12 Lift the Deluxe Pint out of the outer bowl and enjoy!
NOTE: If your treat contains mix-ins, processing again will further crush your mix-ins and create a
new flavor.
MIX-IN TIPS
Add 1/4cup of crushed candies, frozen fruits, chopped nuts, chocolate pieces, and more. When
adding several dierent types of mix-ins, do not exceed 1/4cup in total. Adjust the quantity of
mix-ins to taste, ensuring the outer bowl lid can still comfortably close over the Deluxe Pint.
Hard mix-ins will remain intact.
Mix-ins like chocolate, candy, and nuts will not be broken down during the MIX-IN program. Use mini
chocolate chips and candies or pre-chopped ingredients.
Soft mix-ins will get broken down. Mix-ins like cereal, cookies, and frozen fruit will end up smaller
after the MIX-IN program. Use bigger pieces of soft ingredients.
For ice cream and gelato, fresh fruit, sauces, and spreads are NOT recommended as mix-ins. Adding
fresh fruit, fudge, and caramel sauces will water down your treat. Chocolate hazelnut spread and nut
butters also do not mix well. Frozen fruit or chocolate/caramel shell toppings are recommended.
IMPORTANT: Review all warnings before proceeding.
8Press the power button to turn on the unit. If the outer bowl is properly
installed, the control panel will illuminate and the unit will be ready for use.
Press TOP, FULL, or BOTTOM, then use the dial to select the program that
matches your base. The program will automatically stop when complete.
10 To remove lid, press the lid unlock button and twist the lid counterclockwise.
13 Rinse the outer bowl lid to remove any sticky residue or pieces wedged in the
Deluxe Creamerizer™ Paddle. Then detach the paddle by pressing the latch on the
top of the outer bowl lid. For easy cleanup, release paddle directly into the sink.
14 Turn the unit o by pressing the power button. Unplug the unit when finished.
Refer to the Care & Maintenance section for cleaning and storage instructions.
15 Didn’t finish your Deluxe Pint? Flatten the top of your frozen treat with
a spoon or spatula before refreezing. If the treat is hard after refreezing,
process it again on the program used to make it. If it’s soft, just scoop and
enjoy it. Before reprocessing a drinkable leftover, add a 4 oz. pour-in of
your choosing for FROZEN DRINK or a 6 oz. pour-in of your choosing for
SLUSHI or CREAMICCINO.

TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation, turn power o and unplug
unit before troubleshooting.
Unit moves on counter while processing.
• Make sure the countertop and the feet of the unit are clean and dry.
Frozen treat is liquid, not solid, after processing.
• If a base is soft after processing, put the CREAMi® Deluxe Pint back in the freezer for several hours or
until desired consistency is reached.
• For best results, freeze base for at least 24 hours and process immediately after removing from the
freezer. If the processed base is still not firm, try setting your freezer to a colder temperature. The unit
is designed to process bases between 9°F and -7°F.
• The proportion of fat or sugar may be too high in your recipe. Consult the inspiration guide and use
the included recipes as a guide for best results.
Frozen treat looks crumbly or powdery after processing.
• When bases are frozen in very cold freezers, they may come out crumbly. After running a One-Touch
Program, use the RE-SPIN program to make your frozen treat smoother and creamier.
• The proportion of fat or sugar may be too low in your recipe. Consult the inspiration guide and use
the included recipes as a guide for best results.
One-Touch Programs will not illuminate.
• Ensure the unit is plugged into a working outlet before installing the outer bowl. Then press the power
button to select a program.
• Make sure the unit is fully assembled for use. If the unit is powered on and the outer bowl is not
installed correctly, the install light will flash. If the paddle is not installed correctly, the install light will
illuminate. All One-Touch Programs will be available when the unit is fully assembled and a processing
mode has been selected.
• The unit does not allow you to run programs back to back. Between programs, lower the bowl and
check the results before raising the bowl and running another program.
Install light is flashing.
• The outer bowl is not installed or is not installed correctly. Re-install the paddle into the outer bowl lid and
the lid onto the outer bowl, then re-install the outer bowl onto the motor base until it clicks into place.
Install light is steadily illuminated.
• The outer bowl is correctly installed, but the paddle is missing or has been incorrectly installed. Lower
the platform by pressing and holding the bowl release button on the left of the motor base while
twisting the outer bowl handle toward the center. Be sure the paddle is installed in the lid.
The display shows E1 or E2 and the program lights are flashing.
• The motor has overloaded and needs to be reset. Unplug the unit, remove the bowl, and allow the
motor base to cool for approximately 15 minutes before running again.
• Remove the outer bowl lid and paddle. Ensure no ingredients are jamming the lid assembly.
• The ingredients you are trying to process might be too dense. Make sure you are using ingredients
with sugar or fat. Follow the recipes in the inspiration guide for best results.
• Your freezer might be very cold. The unit is designed to process bases between 9°F and -7°F. Change
the setting of your freezer, move the Deluxe Pint to the front of your freezer, or leave the Deluxe Pint
out on the counter for a few minutes before processing.
• DO NOT process a solid block of ice, ice cubes, or hard, loose ingredients.
The display shows E3 and the program lights are flashing.
• There was an error and the program did not successfully complete. First, unplug the unit. Check that
the paddle is installed properly, then plug the unit back in and try running the program again.
Deluxe Pint froze at an angle in the freezer.
• For best results, do not process a Deluxe Pint that has been frozen at an angle or scooped out
of and then refrozen unevenly.
• Always smooth out the surface of your ice cream before refreezing. If the Deluxe Pint is frozen
unevenly, put the Deluxe Pint in the fridge to allow the ingredients to melt. Then whisk to make sure
the ingredients are combined. Refreeze, making sure to place the Deluxe Pint on a level surface in
your freezer.
Outer bowl will not release from motor base after processing.
• Wait approximately 2 minutes, then try to remove the outer bowl again. Hold the release button on
the left side of the motor base and twist bowl handle clockwise to remove. This may take some force.
• To prevent the outer bowl from getting stuck on the motor base, make sure the cavity on top of the
paddle is fully dry before processing. Also, when processing dierent bases consecutively, make sure to
rinse and dry the paddle after processing each base. With some recipes, water may freeze between the
paddle and motor base causing them to stick together; drying the paddle between runs will prevent this.
Inside of CREAMi Deluxe Pint is scratched.
• Light scratching of the Deluxe Pint is normal after regular use. To keep the Deluxe Pint from
scratching, prep ingredients in a separate bowl and avoid aggressive use of metal utensils in the
Deluxe Pint. Clean with soft, nonabrasive cloths.
CLEANING
Hand-Washing
Wash containers, lids, and paddle in warm, soapy water. Use a dishwashing utensil with a handle to
clean the paddle. Thoroughly rinse and air-dry all parts.
Dishwasher
Containers, lids, and paddle are top-rack dishwasher safe. Ensure the paddle, Deluxe Pint, outer bowl,
and lids are all separated before placing them in the dishwasher.
Outer Bowl Lid
Remove paddle before cleaning the outer bowl lid as ingredients may be stuck under the paddle. Then run
warm water through the paddle release lever and out the drain holes on either side. Position the lid with
the lever side down to fully drain the lid.
Remove the dark grey rubber lip seal wrapped around the middle of the underside of the outer bowl lid.
Then hand-wash the lid and seal with warm, soapy water or place in the dishwasher.
Motor Base
Unplug the motor base before cleaning. Wipe motor base with a clean, damp
cloth. Do not use abrasive cloths, pads, or brushes to clean the base.
Using a damp cloth, wipe the spindle below the control panel after each use.
NOTE: Before cleaning, ensure to remove the Deluxe Creamerizer™ Paddle from the outer bowl lid
by rinsing the lid and then pressing the paddle latch.
CARE & MAINTENANCE
If liquid is trapped between the motor base and the platform, raise the platform
to clean. Place the outer bowl onto the motor base with the handle centered
below the control panel. Twist the handle to the right to raise the platform. Then
use a damp cloth to clean the area between the base and the raised platform.
STORING
For cord storage, wrap the cord with the hook-and-loop fastener near the back of the motor base.
DO NOT wrap the cord around the bottom of the base for storage.
Do store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or
create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system that prevents damage to the motor and drive system should
you inadvertently overload it. If the unit is overloaded, the motor will be temporarily disabled. Should this
occur, follow the reset procedure below.
1 Unplug the unit from the electrical outlet.
2 Allow the unit to cool for approximately 15 minutes.
3 Remove the outer bowl lid and paddle. Ensure no ingredients are jamming the lid assembly.
IMPORTANT: Ensure that maximum capacities are not exceeded. This is the most typical cause of
appliance overload.
NOTE: DO NOT process a solid block of ice or ice cubes. DO NOT make a smoothie or process hard,
loose ingredients. Fruit must be crushed to release its juice or combined with other ingredients and
frozen before processing.

TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
SharkNinja Operating LLC
Illustrations may differ from actual product. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change withoutnotice.
CREAMI and NINJA are registered trademarks of SharkNinja Operating LLC.
CREAMERIZER, CREAMICCINO, and CREAMIFY are trademarks of SharkNinja Operating LLC.
This product may be covered by one or more U.S. patents.
See sharkninja.com/patents for more information.
© 2023 SharkNinja Operating LLC
PRINTED IN MEXICO SC: 01-05-2024
SHNMDL: CN501CO_B
OBPN: CN501CO_IB_MP_Mv4_230425
Elbrd: J.E. PAGS.
814100185
*814100185*
Accessory type and quantity may vary depending on the model.
The image shown here is for illustrative purposes only and may be subject to
change.
NOTE: In order to ensure the highest possible standard for refurbished items, all
units are thoroughly inspected as part of the process.
For this item, water may be used during the refurbishing process and so; you may
notice some condensation in the water reservoir. It is recommended to rinse the
water reservoir with fresh water prior to its first use.

Quick start guide
& get started recipes
Please make sure to read the enclosed safety instructions prior to using your unit.
CREAMi® Deluxe
Pints & Lids
BPA-free Deluxe Pints
and lids for making and
storing CREAMi treats.
Outer bowl lid
locks Creamerizer Paddle in place.
Deluxe Creamerizer™Paddle
Dual functioning paddle finely
shaves and mixes frozen ingredients
into the creamiest treats.
Outer bowl
securely holds container in
place during processing.
NOTE: Unit color, number of Deluxe Pints, and programs may vary by model.
RECIPE BOOK NOT INCLUDED

8.
Remove lid
Press the lid unlock
button and twist
to remove lid.
Use a spoon to create a
1 1/2-inch wide hole that
reaches the bottom of the
processed ingredients.
Add chopped or broken
mix-ins to the hole. Select
the same processing mode,
then select MIX-IN.
If not adding mix-ins, RE-SPIN
can be used on a crumbly or
powdery output to make it
creamy. RE-SPIN is often
needed for very cold bases.
Do not RE-SPIN before
using MIX-IN program.
Select the mode prior
to selecting RE-SPIN.
OR
9.
2.
Install
Deluxe Pint
Remove lid from Deluxe Pints
and check that ingredients
have not been frozen at an
angle. Place Deluxe Pint with
frozen base in outer bowl.
4.
Install lid
Position tab of lid just
slightly to right of outer
bowl handle so lines
on lid and handle align.
Rotate lid clockwise
to lock.
Assembly & Processing
5.
Install outer bowl
After plugging in unit, place outer
bowl on base with handle centered
on unit. Twist handle to the right to
raise platform and lock bowl in place
(signaled by a click).
1.
Plug in
unit first
Unit will not run
if outer bowl is
installed before unit
is plugged in.
6.
Select processing
mode & program
Press Power. Press a processing
mode (TOP, FULL, or BOTTOM),
then turn dial to select a program
and press dial to begin processing.
7.
Remove bowl
When program is complete, hold
release button on left of motor
base and twist bowl handle
clockwise, then pull away
from unit to remove.
If control panel will not illuminate, ensure unit is properly assembled.
See troubleshooting section of the safety instructions if install light is illuminated.
NOTE
3.
Install
Creamerizer™ Paddle
Press and hold paddle latch
on top of outer bowl lid, then
insert paddle in bottom
of lid. Release latch
to secure paddle.
Disassembly & Cleaning
Remove Deluxe Pint & paddle
Lift pint out of outer bowl.
Rinse outer bowl lid to remove any sticky residue
or pieces wedged in the paddle.
Remove paddle by pressing paddle latch on top of lid.
All parts are top-rack dishwasher safe and can also be hand-washed.
TOP and BOTTOM processing zones are only available with SCOOPABLE programs.
NOTE
OPTIONAL PROCESSING
INGREDIENTS
For Freezing
1/2cup fruit punch powdered drink mix
1 3/4cup (14 ounces) warm water
Fruit Punch Slushi
Start Here! Prep Your Deluxe Pint Slushi Recipe*
PREP: 3 minutes | FREEZE: 24 hours | PROGRAM TIME: 5 minutes | MAKES: 2 servings
Place the fruit punch
powder into an empty
CREAMi®Deluxe Pint.
Pour the warm water
into the pint up to the
DRINKABLE FREEZE
FILL line.
Combine mixture until
the drink powder is
completely dissolved.
Place storage lid
on Deluxe Pint and
freeze for 24 hours.
Remove Deluxe Pint
from freezer and
remove lid.
Add pour-in to
DRINKABLE POUR-IN
line. Refer to previous
pages for Assembly &
Processing instructions.
Press FULL, then
use the dial to
select SLUSHI.
When processing
is complete, transfer
slushi to a glass and
serve immediately.
DIRECTIONS
For Freezing
PREFER MORE SIPPABLE? If you prefer a thinner frozen drink after processing, simply add
2–4 additional tablespoons of your desired pour-in, then select RE-SPIN.
NOTE
If your pour-in contains alcohol, select
FROZEN DRINK.
TIP
SCAN HERE
for step-by-step
video to make a
FRUIT PUNCH
SLUSHI
Bowl Release
Button
To remove
outer bowl, hold
release button.
For Processing
Pour-in: water, alcohol, or juice
*Or, turn the page over to prep your
personalized ice cream recipe.
For Processing
ADD 6 oz.
POUR-IN
SLUSHI
PROCESSING MODE
FREEZE
for 24 hours

© 2023 SharkNinja Operating LLC. CREAMI and NINJA are registered trademarks of SharkNinja Operating LLC.
CREAMERIZER is a trademark of SharkNinja Operating LLC.
INGREDIENTS
1 1/2tablespoons (3/4ounce) cream cheese
1/2cup granulated sugar
Flavoring: 1 1/2teaspoons extract of choice
OR 3 tablespoons cocoa powder
1 cup plus 2 tablespoons heavy cream
1 1/2cups whole milk
1/3cup of your favorite mix-ins (optional)
PICK YOUR MIX-INS TO ADD A PERSONAL TOUCH
Perfectly Personalized Ice Cream
PREP: 5–10 minutes | FREEZE: 24 hours | PROGRAM TIME: 2 minutes | MAKES: 6 servings
Microwave cream
cheese for 10 seconds.
Add sugar and flavor,
then whisk the mixture
until it looks like frosting.
Slowly mix in heavy
cream and milk until
sugar is dissolved.
Pour base into CREAMi®
Deluxe Pint. Place storage
lid on Deluxe Pint and
freeze for 24 hours.
Remove lid from frozen
Deluxe Pint. Refer to
previous page for
Assembly & Processing
instructions.
Select processing mode
(FULL, TOP, or BOTTOM),
then select ICE CREAM.
Prepare 1/3cup of mix-ins, which can include your favorite crushed candies,
frozen fruits, chopped nuts, chocolate pieces, and more.
PICK YOUR FLAVOR
Vanilla extract Cocoa powderMint extract Fruit extractAlmond extract
MAKE IT DAIRY-FREE Use vegan cream cheese for cream cheese, unsweetened coconut cream
for heavy cream, and unsweetened oat milk for milk. Whisk the coconut cream until smooth,
then add the remaining ingredients.
Make two flavors from one base.
NOTE
With a spoon, create a 1 1/2-inch wide hole that reaches
the bottom of the processed ingredients.
Add mix-ins to the hole. Select the mode previously
processed, then select the MIX-IN program.
PRINTED IN MEXICO SC: 01-05-2024 SHNMDL: CN501CO_B OBPN: CN501CO_QSG_MP_230421