Ninja DUALBREW PRO User manual

Please make sure to read the enclosed Ninja®Owner’s Guide prior to using your unit.
QUICK
START
GUIDE
SPECIALTY COFFEE SYSTEM
DualBrew
GROUNDS & PODS
+ RECIPES

3
TRAVEL MUG
& XL SIZES
Place an XL Cup, Travel Mug,
or XL Tumbler on the base of
the brewer.
For how-to videos and more, visit ninjakitchen.com2
FILLING THE WATER RESERVOIR
BEFORE
YOUR
FIRST
BREW
HERE’S WHAT’S IN THE BOX
60 OZ.
THERMAL CARAFE
Keeps coee hot, no
warming plate required.
FROTHER WHISK
60 OZ. REMOVABLE
WATER RESERVOIR
NINJA DUALBREW
BREW BASKET
Comes fully installed in
the brewer. It must always
be inserted when brewing
pods or grounds.
NINJA
POD ADAPTER
Comes fully installed in
the brewer. Always ensure to
insert it over the brew basket
when brewing pods.
CUP, MUG, OR CARAFE
CUP
Pull down the cup platform to
set a mug on it.
CARAFE
Place the carafe on the base
of the brewer.
STEP 1.
Remove the
reservoir
from the base.
Remove the
removable latch
from the back of
the brewer.
STEP 2.
Swing the reservoir base
around the brewer until
it clicks into place. You
may feel some resistance.
Then, rotate the removable
latch 180 degrees and reinsert
it in the new gap where the base
was previously positioned.
The water reservoir can be positioned to the right or along the back of the brewer to optimize counter space.
POSITIONING THE WATER RESERVOIR
To prime your brewer:
1Plug it into the wall and
turn it on.
2Fill the water reservoir
to the Full line with fresh
water and place it on the
base.
3Remove the Ninja Pod
Adapter and slide the
Sliding Lid into the closed
position.
4Place the empty carafe
under the brew basket
and run a Full Carafe,
Classic Brew.
Once the brew is complete,
discard the water and
you’re ready to brew.
NINJA
SMART SCOOP™
Use this to measure
coee grounds.
PAPER FILTER KIT
Fold along the seams
before inserting firmly
into brew basket.
FILL TO THE FULL LINE
Fill up to, but do not exceed,
the Full line.
If you live in a high-altitude
area, running a calibration
brew is required. Not running
a high-altitude calibration
brew in a high-altitude
area will result in excessive
steaming during brewing.
Refer to page 7 of the Owner's
Guide for instructions on
running a high-altitude
calibration brew.
Back of brewer Side of brewer
FULL

For how-to videos and more, visit ninjakitchen.com Questions? 1-877-646-5288 54
LOCKING AND REMOVING THE NINJA POD ADAPTER
BREW BASKET AND NINJA POD ADAPTER ASSEMBLY
GROUNDS PODS
OR
The Ninja DualBrew Pro Coee System comes with a unique Ninja Pod Adapter already installed on the
brewer. Always ensure the adapter is installed over the brew basket.
1. Once the adapter is installed in the brewer,
make sure the position indicator on the left side
of the adapter is aligned with LOCK by pulling the
handle toward you. Then, lift to open the handle,
insert a pod, firmly push down on the handle to
pierce the pod, and begin programming your brew.
2. To uninstall the adapter, remove the used pod and
close the handle. Push the handle away from you
so the position indicator is in the REMOVE position.
Then, using the edges on the left and right, lift the
adapter out of the brewer.
NINJA SMART SCOOP™
The Ninja Smart Scoop is used for accurately measuring coee grounds. The numbers beside the icons
show the number of level scoops recommended for each brew size.
SLIDING LID
The sliding lid is used only when brewing loose coee grounds. To use it, first remove the Ninja Pod Adapter.
Then, using the handle on top of the brewer, slide the lid toward you until it firmly clicks into place.
OPEN CLOSED
BREW BASKET MUST BE INSERTED WHEN USING GROUNDS OR PODS.
NINJA POD ADAPTER
Ensure adapter is in the REMOVE position
before installing. Always insert over the
brew basket when brewing pods.
INSERT FILTER
Fold the #4 paper cone filter along the seams,
open the top fully, then insert filter firmly
into the brew basket.
BREW BASKET
Must always be inserted when brewing
grounds or pods.
BREW BASKET
Must always be inserted when brewing pods
or grounds. Do not insert a filter.
REMOVE
LOCK
REMOVE
LOCK
NOTE: The Ninja Pod Adapter is compatible only with K-Cup pods. It is not compatible with
reusable K-Cup filters. If using ground coee, use the Grounds mode with a paper or permanent filter
(sold separately) to brew a single-serve size.
SERVING SIZE NINJA SMART SCOOP
GROUND COFFEE
2–3 small scoops
3–5 small scoops
3–5 big scoops
4–7 big scoops
2 big scoops
Specialty 4 oz.

For how-to videos and more, visit ninjakitchen.com Questions? 1-877-646-5288 76
AUTOMATIC DRIP STOP
1CHOOSE A METHOD
To enter hot water mode,
turn the dial on the left side of the
brewer to the water droplet icon,
aligning it with the marker. You will
see a change in the display.
Ensure the brew basket
is installed and the Ninja
Pod Adapter is removed.
Then, insert a paper filter
in the basket (refer to
steps on pages 4 and 5).
Use the Ninja Smart Scoop™
to add your desired amount
of coee grounds (refer to
the Smart Scoop section
on page 5).
Ensure the brew basket and
Ninja Pod Adapter are installed
in the brewer (refer to steps on
pages 4 and 5).
Lift adapter handle to reveal
pod holder and insert a pod.
Firmly push down on the handle
to pierce the pod. Some noise
and resistance is normal.
Slide the sliding lid forward,
ensuring it is completely closed.
The water outlet is completely
separate from the coee outlet
to ensure clean water is dispensed
every time.
OR
GROUNDS PODS
OR
HOT WATER
The hot water will dispense next to
the coee outlet.
*Approximate brew
volumes based on
Classic brew. Rich
brew will produce
slightly less output.
Refer to the
Approximate Brew
Volumes chart in the
Owner’s Guide for
more information.
3CHOOSE A BREW
4BREW
Pods cannot
brew in
carafe sizes.
2CHOOSE A SIZE
NOTE: Make sure to use a vessel that is big enough for the brew size you select.
*Approximate brew
volumes based
on Classic brew.
Rich brew will
produce slightly
less output. Refer
to the Approximate
Brew Volumes chart
in the Owner’s
Guide for more
information.
Press the START BREW button to start brewing. There will be an illuminating progress
bar on the display to track the status of your brew.
THE BREW MAY PAUSE ONCE OR MULTIPLE TIMES DURING THE BREW CYCLE.
THAT'S OK. Pausing allows the coee grounds to fully extract and unlock the full
flavor of the brew style.
17 size options
ranging from
2 oz. to 60 oz.
HOT WATERPODSGROUNDS
CLASSIC RICH
Smooth, well-
balanced flavor.
Richer than classic, with
more intense flavor that
stands up to milk, cream,
or flavoring.
A super-rich concentrate
that allows you to make
coee-based drinks like
cappuccinos and lattes.
Will only brew 4 oz.
SPECIALTY
BOIL
Two water
temperatures
for a variety of
dierent foods
and beverages.
6 oz.
8 oz.
10 oz.
12 oz.
8 oz.
10 oz.
12 oz.
15 oz.
18 oz.
28 oz.
37 oz.
46 oz.
55 oz.
NOTE: Ensure the drip stop is open before starting your coee brew.
Specially designed to brew hot over
ice for freshly brewed iced coee that
is not watered down.
Always fill your vessel to the top with
ice cubes before brewing Over Ice.
OVER ICE
NOTE: DO NOT use glassware on any brew setting.
HOT WATER MODE ONLY
HOT
IMPORTANT: Close the drip
stop before brewing hot
water to ensure no excessive
coee drips into the vessel
(refer to the drip stop section
on page 8).

Questions? 1-877-646-5288 98 For how-to videos and more, visit ninjakitchen.com
CAN’T WAIT FOR THAT FIRST CUP?
Close the drip stop to pause the brew cycle, and pour
yourself a cup. Then, reopen the drip stop to continue
the brew.
STOP THE DRIPS AFTER A BREW
At the end of a brew, close the drip stop to
prevent coee dripping from the brew
basket and Ninja® Pod Adapter.
DRIP STOP
The drip stop is used to close o the brew basket to prevent any coee from dispensing. You will need to
manually open and close the drip stop by moving the handle to your desired position. The drip stop can
be closed and reopened at any point before, during, or after a brew.
OPEN
HOTCOLD
FROTHING
WARNING: To avoid contact with steam and hot surfaces, DO NOT reach
across top of brewer to froth.
1. Add milk to your cup until it is about 1⁄3full.
For cold froth, go to Step 3.
For hot froth, microwave for 45–60 seconds.
2. Swing the arm of the frother toward the front of
the brewer. Install the frother whisk by twisting it
to the right.
3. Hold the cup under the frother and submerge the
whisk just below the surface of the milk. Press and
hold the button on top of the frother and froth for
30–45 seconds.
4. Remove the frother whisk by twisting it to the left.
Keep your cup below the whisk while you carry it to
your sink or dishwasher for easy cleaning.
THE INTEGRATED FROTHER DOES NOT HEAT MILK.
CLOSED
CAPPUCCINO-STYLE
COFFEE
INGREDIENTS
2 Ninja Big Scoops
(4 tablespoons)
ground coee
1⁄2cup milk
Sweetener, as desired
Ground cinnamon,
for garnish
DIRECTIONS
1. Following the measurement provided, place the
ground coee into the filter.
2. Pour milk into a 12-ounce mug. Microwave for
45–60 seconds, then froth for 30 seconds.
3. Set the mug containing frothed milk in place to brew.
4. Press the BREW STYLE button to select
SPECIALTY, then press the START BREW button
to begin the brew.
5. When brew is complete, sweeten and garnish
as desired.
Brew: Specialty Makes: 1 serving (12-ounce cup)
SPECIALTY
ICED NUTTY
COCOA LATTE
INGREDIENTS
2 Ninja Big Scoops
(4 tablespoons)
ground coee
2 tablespoons chocolate syrup,
plus more for garnish
1 tablespoon caramel syrup,
plus more for garnish
2 cups ice
1⁄2cup milk
1 tablespoon peanut butter
DIRECTIONS
1. Following the measurement provided, place the
ground coee into the filter.
2. Add chocolate syrup, caramel syrup, and ice to
an 18-ounce cup and set in place to brew.
3. Press the BREW STYLE button to select
SPECIALTY, then press the START BREW
button to begin the brew.
4. While coee is brewing, place milk and peanut
butter in a large mug, stir to combine, then
microwave for 45–60 seconds.
5. When brew is complete, stir to combine.
6. Froth milk mixture for 30 seconds, then gently
pour over coee. Garnish as desired.
Brew: Specialty Makes: 1 serving (18-ounce cup)
SPECIALTY

1110 For how-to videos and more, visit ninjakitchen.com
Notes
GUIDE TO KEEPING COFFEE HOT
CERAMIC CUP PAPER CUP
Cup
Temperature
Room
temperature
Pre-warmed
with hot water
Pre-warmed
in microwave
with milk
Room
temperature
Drinking
Temperature
Hot Hotter Hotter Hottest
Why is there a
dierence?
A cold ceramic
mug will steal
heat from the
coee as it
warms itself up.
If the mug is
already warm, it
will not steal as
much heat from
the coee.
Just like your
cold mug, cold
milk lowers the
temperature of
your coee.
Unlike a ceramic
mug, a thinner
paper cup
does not steal
substantial heat
from the coee.
The type of cup you brew into can greatly influence the drinking temperature of your coee.
For a hotter cup, use the hot water mode on BOIL to conveniently pre-warm the cup.
NOTE: DO NOT put the carafe in the microwave.

For questions or to register your product, contact us at
1-877-646-5288 or visit us online at ninjakitchen.com
@ninjakitchen
SPECIALTY COFFEE SYSTEM
DualBrew
GROUNDS & PODS
CFP305_QSG_MP_MV21
© 2021 SharkNinja Operating LLC
NINJA is a registered trademark of SharkNinja Operating LLC.
NINJA SMART SCOOP is a trademark of SharkNinja Operating LLC.
All other marks, including KEURIG and K-CUP, are trademarks of their respective owners.