Ninja Foodi User manual

Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit.
Hybrid Edge™Blades
Assembly
Using the Unit
What’s in the Box
Auto-iQ®Programs
Intelligent preset programs combine unique blending
and pausing patterns that do the work for you.
START/STOP
Press for continuous blending up to
60 seconds; press again to stop.
PULSE
Use short presses for short pulses
and long presses for long pulses.
Tips
START/STOP and PULSE cannot be used in conjunction with any Auto-iQ programs.
To stop running an Auto-iQ program before it’s done, press the currently active button again.
For questions or to register your product, visit us online at ninjakitchen.com
@ninjakitchen
© 2021 SharkNinja Operating LLC.
AUTO-IQ, FOODI, and NINJA are registered trademarks of SharkNinja Operating LLC.
HYBRID EDGE is a trademark of SharkNinja Operating LLC.
SS100_QSG_REV_Mv1
WARNING: Handle the blade assembly with care when washing, as the blades are
sharp. Contact with the blades’ edges can result in laceration.
Cleaning
Dishwasher
Containers, lids, and blade assembly
are all dishwasher safe.
Hand-Washing
Wash containers, lids, and blade assembly
in warm, soapy water. When washing the
blade assembly, use a dishwashing utensil
with a handle.
1–2 DROPS DISH SOAP
Base
EXTRACT
Green Drinks
Refreshers
BOWL
Smoothie Bowls
Açai Bowls
Sorbet
QUICK START
GUIDE
Nutrient
Extraction* Cup
with Spout Lid
Smoothie Bowl
Maker with
Storage Lid
FPOFPO
Use DRINKABLE
programs with the
single-serve cup.
Use SPOONABLE
programs with
the Smoothie
Bowl Maker.
STUCK-ON INGREDIENTS
IN THE SMOOTHIE BOWL MAKER?
1. Rinse the bowl maker and blade assembly
under WARM WATER after processing.
2. Fill the bowl maker with warm water up to
the top of the built-in tamper and add
1–2 SMALL DROPS of dish soap.
3. Screw on the blade assembly and press BOWL.
Twist the built-in tamper counterclockwise
continuously while cleaning.
4. Once complete, empty contents and rinse
under warm water.
NOTE: The built-in tamper in the
Smoothie Bowl Maker is not removable.
WATER
TO TOP OF
BUILT-IN
TAMPER
*Extract a drink containing vitamins and nutrients from fruits and vegetables.

1.
Fill container with desired
contents. Screw on the
blade assembly until you
have a tight seal.
3.
When blending is
complete, remove the
container from base.
Then, remove the blade
assembly from container.
WARNING: Handle the blade assembly with care, as the blades are sharp.
4.
Screw on the blade assembly and install
the bowl maker on the motor base.
Select BOWL and twist the built-in
tamper counterclockwise continuously
while processing.
Assembly
Blend & Enjoy
OR
OR
SMOOTHIE BOWL BASICS
2.
Flip container upside
down and install on base.
Rotate clockwise until it
clicks into place.
1.
Select any program
to begin blending.
DID YOU KNOW?
Smoothie bowls are
thicker & spoonable,
compared to
smoothies which are
thinner & drinkable.
5.
After blending is complete, add your favorite toppings, such as
coconut flakes, granola, fresh bananas, berries, and agave nectar.
1.
Add milk or milk alternative such
as soy, coconut, almond, or oat
milk, up to the LIQUID FILL line.
2.
Add frozen fruits, directly from
freezer and/or açai or dragon fruit
packets up to the MAX FILL line.
Cut larger fruit, like bananas, in quarters.
If using açai or dragon fruit packets,
thaw slightly and cut in quarters.
ALWAYS DO THIS FIRST.
3. (Optional)
Amplify your base by adding
1 scoop of yogurt, flavor powder,
protein powder, and/or nut butter.
USING THE SMOOTHIE BOWL MAKER
FPOFPO
FPOFPO
FPOFPO
FPOFPO
FPOFPO
FPOFPO
IF USING
SINGLE-SERVE CUP,
SKIP STEP 2.
2.
If using the
bowl maker, twist
the built-in tamper
counterclockwise
continuously while
processing.
Taking It To Go?
Place the Storage Lid or Spout Lid on top of the
bowl maker or single-serve cup, and turn clockwise to seal.
NOTE: DO NOT microwave or freeze the single-serve cup or Smoothie Bowl Maker.