Nitecore SCL10 User manual

SCL10
USER MANUAL
IMPORTANT NOTICE CONCERNING WARRANTY SERVICE
Thank you for purchasing! Before using this product, please nd your verication code on the package box, and go to http://charger.nitecore.com/validation
(or scan the QR code beside the verication code to visit on your mobile phone).Type in your verication code and personal information as required, and submit
the page.After verication, NITECORE will send you a warranty service email.This email and your registration email address are essential to your possible warranty
application. Before you complete the warranty service registration, you cannot enjoy our warranty service for your purchase.
Features
• Multifunctional and portable Smart Camera Light specially designed for
photography and video shooting
• Utilizes 96 x High CRI LEDs (Ra>97,TLCI>99)
• 2500K-6300K customizable color temperature for various scenarios
• OLED real-time display for Runtime Remaining, Brightness Output, Color Temperature,
etc.
• Built-in 10,000mAh Li-Po battery provides a max runtime of 70 hours
• Available to be used as a power bank with dual-way USB-C input / output port +
USB-A output port with a max input and output power of 18W
• Highly efcient constant current circuit provides a stable output
• Body constructed from aero grade aluminum alloy
• Standard 1/4" screw hole with hot shoe mount included
Technical Data
Color Temperature 2500K-6300K
Color Rendering Ra>97,TLCI>99
LED 96 x High CRI LEDs
LED Rated Power 12W
Max Brightness Output 800 Lumens
Max Distance 39m
Max Peak Beam Intensity 380cd
Illumination Angle Nearly 180°
Illuminance 2500K: 2,200 lux@30cm, 1,100 lux@50cm
4400K: 2,300 lux@30cm, 1,120 lux@50cm
6300K: 2,500 lux@30cm, 1,150 lux@50cm
Brightness Output Range 5%-100%
Runtime Approx. 70h at 5% Output
Approx. 3.5h at 100% Output
Battery Type Li-Po Battery
Capacity 10,000mAh 3.85V (38.5Wh)
Rated Energy 6,600mAh (5V 2.4A)
Input USB-C: 5V⎓2.4A / 9V⎓2A 18W (MAX)
Output USB-C: 5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
USB-A: 5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
18W (MAX)
Dual Ports: 5V⎓2.4A (MAX)
Dimensions 134mm×65mm×14.7mm (5.28"×2.56"×0.58")
Weight 222.5g (7.85oz)
Accessories USB-C Charging Cable, Hot Shoe Mount
Get Charged
Use the USB cable to connect a USB adapter (sold separately) to the USB-C port to
begin the charging process.
• During the charging process, the OLED display will show input power, battery level,
etc.
• The charging process is complete when the display shows a battery level of 100%.
• When the display goes off, short press any button to reactivate it.
• Charging time: 3.5h (Fast charge); 4.5h (5V/2A)
• The standby time is approx. 12 months when in full power.
Used as a Camera Light
On / Off
Press and hold the Power / Mode Button to turn on/off the light.When the light
is turned on, the OLED display will show the text "NITECORE" followed by runtime
remaining,battery level,current brightness output and color temperature. (The SCL10
has memory function. When reactivated, it will automatically access the previous
memorized brightness output and color temperature.)
Adjusting Brightness Output / Color Temperature
When the light is on, short press the Power / Mode Button to select between Brightness
Output and Color Temperature.
Power / Mode Button
1/4" Screw Hole
Hot Shoe Mount
OLED Display
1/4"
Screw Hole
• When the Brightness Output is selected, press and hold the + / - Button to adjust it
between 5%-100%.The runtime remaining will be updated accordingly. (You can
also short press the + / - Button each time for ne-tuning with an increment of 0.1%)
• When the Color Temperature is selected, press and hold the + / - Button to adjust
it between 2500K-6300K. (You can also short press the + / - Button each time for
ne-tuning with an increment of 50K)
Used as a Power Bank
The SCL10 can be used as a power bank to charge other external USB devices. During
the output process, the display will show the current output power, battery level etc.
When the display goes off, short press any button to reactivate it.
Note: When the power is sufcient, the SCL10 is available with camera light and USB
output simultaneously.
Thermal Regulation
The SCL10 has thermal regulation function.It will automatically lower its USB output
power to avoid overheating and prolong the lifespan of the battery when it detects a
high temperature.
Warnings
1. CAUTION! Possible dangerous radiation! Don't look into the light! Maybe
dangerous for your eyes.
2. Please charge the product before the rst use.
3. Please read the user manual carefully before using the product and connect the
applicable external devices only according to the specications in this user manual.
4. Please recharge the product every 3 months when left unused for a prolonged time.
5. Ambient Temperature of Usage: -10~40℃(14~104℃);Temperature of Storage:
-20~60℃(-4~140℃)
6. DO NOT leave the product unattended when it is working. Stop using the product
at any sign of malfunction.
7. DO NOT use charging cables made or sold by unprofessional manufacturers or
ones that are damaged.
8. Store the device in ventilated areas. DO NOT expose the device in rain or moist
environment. Keep it away from any combustible material.
9. DO NOT expose the device to open ames or extremely high ambient temperatures.
10. Avoid any shock or impact to the device.
11. DO NOT place any conductive or metal object in the device to avoid short
circuiting and explosions.
12. DO NOT disassemble or modify the device as this could result in battery explosion,
cracking or leaking, causing personal injury, property damage and/or other
unpredictable risks.
Disclaimer
This product is globally insured by Ping An Insurance (Group) Company of China,
Ltd. NITECORE shall not be held responsible or liable for any loss, damage or claim of
any kind incurred as a result of the failure to obey the instructions provided in this user
manual.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should
any problem covered under warranty occurs, customers can contact their dealers or
distributors in regards to their warranty claims, as long as the product was purchased
from an authorized dealer or distributor. NITECORE's Warranty is provided only for
products purchased from an authorized source.This applies to all NITECORE products.
To be qualied for warranty, please refer to the“IMPORTANT WARRANTY NOTICE” section
on top to validate your product. Any DOA / defective product can be exchanged
for a replacement through a local distributor/dealer within the 15 days of purchase.
After 15 days, all defective / malfunctioning NITECORE®products can be repaired free
of charge for a period of 12 months from the date of purchase. Beyond 12 months,
a limited warranty applies, covering the cost of labor and maintenance, but not the
cost of accessories or replacement parts.
The warranty is nullied if the product(s) is/are:
1. broken down, reconstructed and/or modied by unauthorized parties
2. damaged from wrong operations
For the latest information on NITECORE®products and services, please contact a local
NITECORE®distributor or send an email to [e-mail].
※
All images, text and statements specied herein this user manual are for
reference purpose only. Should any discrepancy occur between this manual and
information specied on www.nitecore.com, information on our ofcial website
shall prevail. SYSMAX Innovations Co., Ltd. reserves the rights to interpret and
amend the content of this document at any time without prior notice.
Thanks for purchasing NITECORE!
SYSMAX Innovations Co., Ltd.
TEL: [phone] FAX: [phone]
E-mail: [e-mail] Web: www.nitecore.com
Address: Unit 6355, 5/F, No. 1021 Gaopu Road,Tianhe District,
Guangzhou, 510653, Guangdong, China
Manufacturer: SYSMAX Power Technology, LLC
Please nd us on facebook: nitecorephotoaccessory
SCL19051022
Made in China

感谢您购买我们的产品 ！
（简体中文）售后服务的重要提示
感谢您购买本产品！在使用本产品之前，请持包装盒上防伪码登录 http://charger.nitecore.cn/validation 或刮开防伪贴纸的二维码，用手机扫描前
往验证页面，按页面提示填写防伪码及个人信息等资料。成功通过正品验证后，您将收到奈特科尔发来的保固凭证邮件。请紧记您的注册邮箱及保
存售后服务邮件，此资料为该产品享受保固服务的重要凭证。
SCL10 说明书
产品特性
• 多功能便携补光灯，适合多种拍摄场景使用
• 采用 96 颗高显色性 LED（Ra ＞ 97，TLCI ＞ 99）
• 色温范围 2500K-6300K，可任意调节，应对不同拍摄场景需求
• 高清 OLED 显示屏，可实时查看剩余电量、亮度、色温等信息
• 内置 10000mAh 高容量锂聚合物电池，最长续航时间达 70 小时
• 可作为应急移动电源使用，设有双向 TYPE-C 接口和 USB-A 接口，支持
18W 大功率快充
• 高效率恒流电路，亮度恒定
• 航太级铝合金机身
• 设有通用 1/4”螺丝口，标配热靴连接支架
技术参数
色温范围 2500K-6300K
显色性 Ra ＞ 97，TLCI ＞ 99
LED 灯珠 96 颗高显色性 LED
LED 额定功率 12W
最大输出 800 流明
最大射程 39 米
最大光强 380 坎德拉
发光角度 近 180°
光照度 2500K：2200 lux@30cm，1100 lux@50cm
4400K：2300 lux@30cm，1120 lux@50cm
6300K：2500 lux@30cm，1150 lux@50cm
可调亮度范围 5%-100%
续航时间 5% 功率输出约 70 小时；100% 功率输出约 3.5 小时
电池类型 锂聚合物电池
电池能量 10000mAh 3.85V（38.5Wh）
额定容量 6600mAh （5V 2.4A）
输入 TYPE-C：5V⎓2.4A / 9V⎓2A 18W（最大）
输出 TYPE-C：5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
USB-A：5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
18W（最大）
多口输出 5V⎓2.4A（最大）
尺寸 134mm×65mm×14.7mm
重量 222.5g（7.85oz）
配件 USB TYPE C 充电线，热靴支架
充电
将 USB 充电线一端连接至 TYPE-C 接口，另一端接上 USB 适配器（可选配件），
并接通电源即可进行充电。
• 当处于正常充电状态时，OLED 显示屏将显示当前输入功率、当前电池电量百
分比等信息。
• 当显示屏显示电池电量为 100%，表示已充电完成。
• 当显示屏自动熄灭，可短按任意按键唤醒。
• 充电时间： 3.5 小时（快充）；4.5 小时（5V/2A）
• 满电时，待机时间约为 1 年。
开关按键
通用1/4”螺丝口
热靴支架
OLED显示屏
通用1/4”
螺丝口
使用补光灯
开启 / 关闭
长按开关按键可开启/关闭本品电源。开启后，OLED显示屏将会显示
“NITECORE”字样，然后显示续航时间、电池电量指示图标、当前亮度及色温
信息。（本品设有记忆功能，再次开启时，将自动进入记忆的亮度及色温）
亮度与色温调节
开启后，短按开关按键，可在“亮度 - 色温”两选项间切换。
• 选中亮度选项后，长按“+ / -”按键，可在 5%-100% 亮度范围内进行调节，
续航时间随之改变。（也可通过短按“+ / -”按键进行小幅度调节，每次短
按一下可增加 / 减少 0.1%。）
• 选中色温选项后，长按“+ / -”按键，可在 2500K-6300K色温范围内进行调节。
（也可通过短按“+ / -”按键进行小幅度调节，每次短按一下可增加 / 减少
50K。）
作为移动电源使用
SCL10 可作为移动电源，为外部 USB 设备进行充电。充电过程中，显示屏显示
当前输出功率、电池剩余电量百分比等信息。当显示屏自动熄灭，可短按任意
按键唤醒。
注：当电量充足时，在开启补光灯同时，可进行 USB 输出。
温控功能
本品设有温度控制功能，当检测到温度过高时，将限制 USB 输出功率以防止温
度继续升高，有效保障电池使用寿命。
注意事项
1. 请勿将光线直接照射眼睛，以免对眼睛造成伤害。
2. 初次使用前，请先对 SCL10 进行充电。
3. 使用本产品之前，请仔细阅读所有说明，并按照本说明书所述之参数，选用
适合的充电设备进行充放电。
4. 当需要长时间储存本品时，请每 3 个月充电一次。
5. 使用环境温度：-10℃～ 40℃，储藏温度：-20℃～ 60℃。
6. 当本品开始工作时，不可无人看管。若发现有任何故障，请立即停止操作。
7. 请勿使用非专业产品制造商推荐或销售的线材。请勿使用已损坏的线材。
8. 请将本品放置在通风、干燥的地方，谨防雨淋，远离易燃易爆品。
9. 请勿将本品暴露于明火或过高温度环境下。
10. 避免机械振动以及冲击，防止损坏本品。
11. 请勿将导电材料或金属物体放入任何端口，避免本品因发生短路而产生爆炸
等意外。
12. 请勿拆解本品，否则可能会导致爆炸、电池破裂或漏液、人身伤害、财产损
坏和其他不可预测的风险。
免责声明
本产品由中国平安保险（集团）股份有限公司全球承保。对未按照本产品说明
书正确指导操作发生任何事故或意外，而导致第三方损失或索赔，本公司不承
担任何责任。
保固服务
NITECORE® 产品拥有售后保固服务。在购买本产品的 15 天内，如果有任何质
量问题均可向经销商要求免费更换。在购买本产品的 12 个月内享受免费保固服
务。在超过 12 个月免费保固期后，本产品享有终身有限度保固服务，如需要更
换重要部件则需收取成本费用。
本保固规则不适用于以下情况：
1. 人为破坏，拆解，改装本产品。
2. 错误操作导致产品损坏。
如对奈特科尔产品有任何疑问，欢迎联系当地的代理商或发邮件到
[e-mail]
※ 本说明书的所有图片、陈述及文字信息仅供参考，请以官网www.
nitecore.cn 实际信息为准。广州希脉创新科技有限公司拥有对说明书内容
的最终解释权和修改权。
更多信息请关注新浪微博：NITECORE 奈特科尔
广州希脉创新科技有限公司
咨询热线： [phone]
销售邮箱： [e-mail]
网 址： www.nitecore.cn
地 址： 中国广东省广州市天河区高普路 1021 号 5 楼 6355 号
邮 编： 510653
SCL19051022