Nokia 1508 Installation instructions

1508(RM-338)
Disassembly/Assembly Nokia Customer Care
Issue 1
Copyright © 2008 Nokia, All rights reserved
Nokia Customer Care
1508 (RM-388)
Mobile Terminal
Disassembly/Assembly

1508(RM-338)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
Contents
Disassembly Instructions
Assembly Instructions
Screw Order for Disassembly
Screw Order for Assembly

1508(RM-338)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
Disassembly Instruction
1 2
Depress battery latch and remove battery cover. Using the SRT-6 start at the bottom of the phone and
work around the ed
g
es to loosen the A-Cover.
3 4
Remove the A
-
Cover.
Separate the keymat.
5 6
Remove the earpiece speaker by lifting with dental tool. Remove 6 ea. #5+ TORX screws.

1508(RM-338)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
7
8
Remove LCD frame. Separate the engine module and B-Cover
9 10
Lift and remove the antenna assy using the SS-93. Lift and remove the IHF speaker using the SS-93.
11 12
Push out and remove Mylar film. Using SS-93 carefully lift LCD.

1508(RM-338)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
13 14
Unlock LCD connector with SS-93. Separate LCD module from engine module
15 16
Carefully lift edge of key dome with dental tool. Peel back and remove key dome from engine
module.

1508(RM-338)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
Assembly Instructions
Perform the assembly in reverse order according to the
instructions above.
Screw Order for Disassembly
Screw Order for Assembly
Torques Information
As shown in picture above: 19.6 Ncm