Nokia 2610 - Cell Phone 3 MB User manual

1
Nokia 2610 User Guide
9200283
Issue 1

2
LEGAL INFORMATION
PART NO. 9200283, Issue NO. 1
Copyright © 2007 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, and Xpress-on are trademarks or registered trademarks of
Nokia Corporation. Other product and company names mentioned herein may be trademarks
or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright © 1997-2007. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes
and improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES
SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME
OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
Export Controls
This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user's authority to operate this equipment.

Contents
3
Contents
For your safety......................... 5
General information ................ 8
Access codes .......................................... 8
1. Get started............................ 9
Install SmartChip card and battery . 9
Charge the battery ............................. 10
Normal operating position................ 10
2. Your phone ......................... 11
Keys and parts ...................................... 11
Standby mode ..................................... 11
Demo mode ........................................... 12
Keypad lock .......................................... 12
3. Call functions .................... 13
Make a call............................................ 13
Last number redial........................... 13
Call your voice mailbox.................. 13
Speed dialing..................................... 13
Answer or decline a call .................... 14
Loudspeaker .......................................... 14
4. Enter text ........................... 15
Settings .................................................. 15
Predictive text input........................... 15
Write compound words.................. 15
Traditional text input ......................... 16
Tips for writing text............................ 16
5. Menu functions.................. 17
Access a menu function .................... 17
Messaging.............................................. 17
Text and message settings ........... 17
Text messages .................................. 18
Multimedia messages .................... 18
Audio message ................................. 18
Voice mail ......................................... 19
Mobile E-mail....................................... 19
Start e-mail ....................................... 19
View the inbox and other folders... 20
Write and send ................................. 20
Reply and forward ........................... 20
Delete .................................................. 20
Preferences ........................................ 20
Notification ....................................... 21
Address book......................................... 21
Recent calls........................................... 22
Settings .................................................. 22
Profiles ................................................ 22
Themes ................................................ 23
Tone settings..................................... 23
My shortcuts .................................... 23
Call and phone settings ................ 23
Display, time, and date settings . 24
GPRS connectivity .......................... 24
Enhancement settings.................... 24
Configuration settings .................. 25
Mall ......................................................... 25
My Stuff................................................. 25
Tones & Graphics ............................. 26
Multimedia ........................................ 26
Tools..................................................... 26
Games and Applications.................... 28
MEdia Net.............................................. 29
Service connection .......................... 29
Browse the Mobile Web................. 29
Disconnect from the Mobile Web.. 30
Browser appearance settings ....... 30
Cookies and cache memory ......... 31
Bookmarks.......................................... 31
Download ........................................... 31
Service inbox..................................... 32
Browser security............................... 32
SmartChip services.............................. 32

Contents
4
6. Battery information ......... 33
Charging and discharging................. 33
Nokia battery
authentication guidelines ............... 34
7. Enhancements ................... 36
Care and maintenance........... 37
Additional safety information 38
Index ....................................... 43

For your safety
5
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle
while driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the phone at a refueling point. Do not use near fuel
or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is
in progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.

For your safety
6
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■About your device
The wireless device described in this guide is approved for use on the GSM 850 and
1900 networks. Contact your service provider for more information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to function.
These network services may not be available on all networks or you may have to make
specific arrangements with your service provider before you can utilize network
services. Your service provider may need to give you additional instructions for their
use and explain what charges will apply. Some networks may have limitations
that affect how you can use network services. For instance, some networks may
not support all language-dependent characters and services.

For your safety
7
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
device may also have been specially configured. This configuration may include
changes in menu names, menu order and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
Some features of this device, such as text messages, picture messages and content,
and application downloads require network support for these technologies.

General information
8
General information
■Access codes
The security code supplied with the phone protects your phone against unauthorized
use. The preset code is 12345.
The PIN code supplied with the SmartChip card, protects the card against
unauthorized use. The PIN2 code supplied with some SmartChip cards, is required
to access certain services. If you enter the PIN or PIN2 code incorrectly three times
in succession, you are asked for the PUK or PUK2 code. If you do not have them,
contact your local service provider.
The module PIN is required to access the information in the security module of
your SmartChip card. The signing PIN may be required for the digital signature.
The restricting password is required when using Call restrictions.
Select Menu > Settings > Security to set how your phone uses the access codes
and security settings.

Get started
9
1. Get started
■Install SmartChip card and battery
Keep all SmartChip cards out of the reach of small children.
For availability and information on using SmartChip card services, contact your
SmartChip card vendor. This may be the service provider, network operator, or
other vendor.
Always switch the device off and disconnect the charger before removing the battery.
Note: Always switch off the power and disconnect the charger and any
other device before removing the covers. Avoid touching electronic
components while changing the covers. Always store and use the device
with the covers attached.
1. Press and slide the back cover toward the bottom of the phone to remove
the cover (1).
2. Remove the battery by lifting it as shown (2).
3. Carefully lift the SmartChip card holder from the finger grip of the phone, and
open the flip cover (3).
4. Insert the SmartChip card, so that the bevelled corner is on the upper right
side and the gold-colored contact area downward (4). Close the SmartChip
card holder, and press it to lock it into place (5).
5. Insert the battery into the battery slot (6).
6. Align the back cover with the back of the phone, and slide it upwards.
Push the back cover up to the top of the phone to lock it (7).

Get started
10
■Charge the battery
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from an ACP-7, ACP-12, or AC-2U
charger. This device is intended to use the BL-5C battery. For availability of
approved enhancements, please check with your dealer.
1. Connect the charger to a wall outlet.
2. Connect the charger to the phone.
■Normal operating position
Your device has an internal antenna.
Note: As with any other radio transmitting device, do not touch the antenna
unnecessarily when the device is switched on. Contact with the antenna
affects call quality and may cause the device to operate at a higher power
level than otherwise needed. Avoiding contact with the antenna area when
operating the device optimizes the antenna performance and the battery life.

Your phone
11
2. Your phone
■Keys and parts
Earpiece (1)
Loudspeaker (2)
Selection keys (3)
Scroll/volume key (4)
Call key (5)
End key and power key (6)
Charger connector (7)
Headset connector (8)
Note: Do not touch this connector as it is
intended for use by authorized service
personnel only.
Warning: The scroll key in this device may contain
nickel. It is not intended to come into prolonged
contact with the skin. Continuous exposure to
nickel on the skin may lead to nickel allergy.
■Standby mode
When the phone is ready for use, before you enter any
characters, it is in the standby mode:
Network name or the operator logo (1)
Network signal strength (2)
Battery charge level (3)
Options (4) — press the left selection key to view your
personal shortcut list. Select Options > Select options to
view the list of available functions that you can add.
Select Organize > Move and the location to rearrange your shortcut list.
Menu (5) — press scroll to display the main menu choices.
MEdia Net (6) — press the right selection key to open MEdia Net Home.

Your phone
12
■Demo mode
To start the phone without the SmartChip card, accept Start up phone without SIM
card?. Then use those features of the phone that do not require a SmartChip card.
■Keypad lock
Select Menu and * quickly to lock or unlock the keypad to prevent accidental
keypresses. To answer a call when the keyguard is on, press the call key.
When you end or decline the call, the keypad remains locked.
Select Menu > Settings > Phone settings > Automatic keyguard > On to set the
keypad to lock automatically after a preset time delay when the phone is in the
standby mode and no function has been used.
When the keypad lock is on, calls still may be possible to the official emergency
number programmed into your device.

Call functions
13
3. Call functions
■Make a call
1. Enter the phone number, including the area code. If you enter an incorrect
character, press Clear to delete it.
For international calls, press *twice for the international prefix, and then
enter the country code, the area code, and the phone number.
2. Press the call key to call the number.
3. Press the end key to end the call or to cancel the call attempt.
Note: While in a call, you can adjust the volume by pressing the Scroll/
Volume key left or right.
To search for a name or phone number that you have saved in Address Book, see
"Address book," p. 21. Press the call key to call the number.
Last number redial
In the standby mode, press the call key once to access the list of numbers you last
called. Scroll to the number or name that you want, and press the call key to call
the number.
Call your voice mailbox
For availability, contact your network operator or service provider
In the standby mode, press and hold 1, or press 1and the call key.
If the phone asks for the voice mailbox number, enter it and select OK.
See also "Voice mail," p. 19.
Speed dialing
Assign a phone number to one of the speed dialing keys, from 2to 9.
See "Address book," p. 21. Call the number in either of the following ways:
• Select the speed dialing key that you want, and press the call key.
•IfSpeed dialing is set to on, press and hold a speed dialing key until the call is
started. See "Call and phone settings," p. 23.

Call functions
14
■Answer or decline a call
Press the call key to answer an incoming call. Press the end key to end the call.
Press the end key to decline an incoming call. If you select Silence, only the
ringing tone is muted. Then either answer or decline the call.
■Loudspeaker
If available, you may select Phn/Spk to use the loudspeaker or the earpiece of the
phone during a call.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.

Enter text
15
4. Enter text
You can enter text using traditional or predictive text input.
When you enter text, predictive text input is indicated by and traditional
text input by at the top left of the display. The character case is indicated
by , , or . To change the character case, press #. The number
mode is indicated by . To change between the letter and number mode,
press and hold #.
■Settings
When writing text, select Options > Dictionary on.
To set predictive text input on, select a language in the dictionary options list.
Predictive text input is only available for the languages on the list.
When writing text, select Options > Dictionary off.
■Predictive text input
You can enter any letter with a single key press. Predictive text input is based on
a built-in dictionary to which you can add new words.
1. With predictive text input on (see "Settings," p. 15), press a key once for each
letter. The word changes after each keystroke.
Example: To write Nokia when the English dictionary is selected, press 6, 6, 5, 4, 2.
For more instructions on writing text, see "Tips for writing text," p. 16.
2. When you finish the word and it is correct, press 0 to confirm the word and
add a space. The navigation keys also moves the cursor.
If the word is not correct, press * repeatedly, and when the word that you
want appears, confirm it; or select Options > Matches, scroll to the desired
word, and press Use.
If the ? character is displayed after the word, your word is not in the dictionary.
To add the word to the dictionary, select Spell, enter the word (in traditional
input), and select Save. When the dictionary is full, the new word replaces the
oldest one that was added.
3. Write the next word.
Write compound words
Enter the first part of the word, press the right navigation key, then write the last
part of the word.

Enter text
16
■Traditional text input
With predictive text input off (see "Settings," p. 15), press a number key repeatedly
until the desired character appears. Not all characters available under a number key
are printed on the key. The characters available depend on the language you selected.
If the next letter you want is located on the same key, wait until the cursor appears,
then enter the letter.
The most common punctuation marks and special characters are available with *.
■Tips for writing text
The following functions may also be available for writing text:
• To insert a space, press 0.
• Press the navigation keys to move the cursor.
• To insert a number while in letter mode, press and hold the desired number key.
• To delete a character to the left of the cursor, select Clear. Select and hold
Clear to delete the characters more quickly. To delete all the characters at
once, select Options > Clear field.
• To quickly set predictive text input on or off when writing text, press and
hold Options.
• To insert a word when using predictive text input, select Options > Insert word.
Write the word using traditional text input, and select Save. The word is also
added to the dictionary.
• To insert a special character when using traditional text input, press *. When
using predictive text input, press and hold *, or select Options > Insert symbol.
Select the character and Insert.
• To insert a smile icon when using traditional text input, press *twice. When using
predictive text input, press and hold *and press *again, or select Options >
Insert smiley. Select a smiley and Insert.
The following options are available when writing text messages:
• To insert a number while in letter mode, select Options > Insert number. Enter
the phone number and press OK; or press Find, search for it in Address Book;
and press Select and OK.
• To insert a name, select Options > Insert contact, and a contact.

Menu functions
17
5. Menu functions
The phone offers you an extensive range of functions, which are grouped into menus.
■Access a menu function
1. To access the menu, select Menu.
2. Use the navigation keys to scroll through the menu.
3. If the menu contains submenus, select the one that you want.
4. Select Back to return to the previous menu level and Exit to close the menu.
■Messaging
The message services can only be used if they are supported by your network or
service provider. Contact your service provider to check for service availability
and rates, to subscribe, and for the correct phone settings.
Text and message settings
Select Menu > Messaging > Message settings > Text messages > Message centers.
Your SmartChip card supports more than one message center. Your settings are
often prepopulated to work optimally with your service provider. If you want to
change or add a message center select or add the one you want to use. You may
need to get the center number from your service provider.
Select Menu > Messaging > Message settings > Multimedia and the
following settings:
Delivery reports > On — to ask the network to send delivery reports about your
messages (network service)
Default slide timing — to define the default time between slides in
multimedia messages
Incoming multi-media messages — to allow the reception of multimedia messages
automatically, manually after being prompted, or to decline the reception.
Allow advertisements — to choose whether you want to receive advertising messages.
This setting is not displayed if Incoming multi-media messages is set to No.
Configuration settings — to select the default service provider for retrieving
picture messages. Scroll to Account to see the accounts provided by the service
provider and to select the one you want to use. You may receive the settings as a
configuration message from the service provider.

Menu functions
18
Text messages
Select Menu > Messaging > New message >Text message.
The short message service (SMS) (network service) allows you to send and receive
multipart messages, which consist of several ordinary text messages. Invoicing may be
based on the number of ordinary messages that are required for a multipart message.
Note that using special (Unicode) characters take up more space.
The blinking indicates that the message memory is full. Before you can receive
new messages, delete some of your old messages.
Multimedia messages
Select Menu > Messaging > New message > Multimedia
Note: Only devices that have compatible features can receive and display
multimedia messages. The appearance of a message may vary depending
on the receiving device.
The multimedia messaging service (MMS) (network service) allows you to send
and receive messages that can contain text, sound, and a picture. The wireless
network may limit the size of MMS messages. If the inserted picture exceeds this
limit, the device may make it smaller so that it can be sent by MMS.
You cannot receive any picture messages if you have a call in progress or a game or
another Java application running. Because delivery of picture messages can fail for
a variety of reasons, do not rely solely upon them for essential communications.
Copyright protections may prevent some images, music, ringing tones, and other
content from being copied, modified, transferred, or forwarded.
Your phone supports sending and receiving picture messages that contain several
pages (slides). To insert a slide in the message, select Options > Insert > Slide.
To set the interval between the slides, select Options > Slide timing.
When you have a new picture message waiting and the memory for the messages
is full, blinks and Memory full. Unable to receive msgs. is displayed. To receive
the message, select OK > Yes and the folder to delete old messages.
Audio message
You can use MMS( network service) to create and send a voice message. MMS
must be activated before you can use audio messages.
Select Menu > Messaging > New message > Audio message. The recorder opens.
When you finish recording an audio message, to send the message, enter the
recipient’s phone number in the To: field. To view the available options, select
Options. To retrieve a phone number from Address Book, select Add > Contact.

Menu functions
19
When your phone receives audio messages, 1 audio message received or N messages
received is displayed. To open the message, select Play; or if more than one message
is received, select Show > Open. To listen to the message later, select Exit. Select
Options to see the available options. The audio message is played through the
earpiece by default. Select Options > Loudspeaker to choose loudspeaker to play
if you want.
Voice mail
The voice mailbox is a network service that you may need to subscribe to it.
Contact your service provider for voice mailbox number and detailed information.
Select Menu > Messaging > Voice mail.
Tip: Press and hold 1 to call your voice mailbox if you have the number set.
■Mobile E-mail
E-mail provides access to certain common e-mail services. If you have an e-mail
account with one of the supported e-mail services, then you can use this application
to access your e-mail account. With this application you can view your inbox,
compose and send e-mail, receive e-mail, receive notification of new e-mail,
and delete e-mail. This e-mail application is different from the SMS and MMS
e-mail function.
If you do not have an e-mail account already, visit the Web site of one of the
e-mail service providers and register for an e-mail account. If you have questions
regarding the cost of e-mail service, contact your wireless network operator.
Start e-mail
1. Select Menu > Mobile Email.
2. Highlight and select the provider with which you have an e-mail account.
Alternatively, you can select Options >Add account and the appropriate
provider from the list.
3. Read and accept the terms of use, if you are presented with any.
4. Enter your user id and password. Note that the password is case sensitive.
5. If you wish to have your login information remembered, highlight the checkbox
option, and select Mark.
6. Select Options > Save.
After the account is successfully validated, it appears on the list.

Menu functions
20
If you select to have your login information remembered, when you next select
that account, the first page of your e-mail inbox view will automatically be loaded.
If the login information has not been remembered, you must login to start using
your e-mail account.
View the inbox and other folders
The inbox view will load the first page of the inbox by default. To go to the next
page of the inbox, select Next (the last item on the page).
To navigate from the inbox to another folder, scroll right or left. This switches the
tab view from the current folder to the next folder. Scroll to the desired folder.
Stop at the desired folder and the first page of that folder loads automatically.
When folder content is loaded, it will not be updated again until you select
Options > Check for Mail.
To view an e-mail, select the e-mail. When you highlight a particular e-mail, you
see an expanded view with more details about the e-mail.
Write and send
1. To start writing an e-mail from the inbox view, select Options > Compose New.
2. Enter the recipient’s e-mail address, a subject, and the e-mail message. To
select from a list of recent e-mail addresses, select Options > Insert.
3. Select Send to send the e-mail.
Reply and forward
1. When viewing an e-mail, select Options > Reply, Reply to All,or Forward.
The e-mail view loads with the appropriate fields completed.
2. Enter in the remaining information.
3. Select Send to send the e-mail.
Delete
To delete an e-mail from the inbox view, select Options > Delete. To mark multiple
e-mails to be deleted, select Options > Mark for Deletion. To delete marked e-mail,
select Options > Delete marked.
To delete an e-mail you are viewing, select Delete.
Preferences
From the inbox view, select Options > Preferences to set the following preferences: