Nokia 2710 User manual

Nokia 2710 User Guide
Issue 1

Contents
Safety 4
Support 5
Get started 5
Insert SIM card and battery 5
Insert a microSD card 5
Remove the microSD card 6
Charge the battery 6
GSM antenna 7
Headset 8
Connect a USB data cable 8
Magnets and magnetic fields 8
Keys and parts 9
Access codes 10
Switch on and off 10
Home screen 10
Keypad lock 11
Functions without a SIM card 11
Applications running in background 11
Calls 11
Make and answer a call 11
Loudspeaker 12
Dialling shortcuts 12
Write text 12
Text modes 12
Traditional text input 13
Predictive text input 13
Navigate the menus 13
Messaging 13
Text and multimedia messages 14
Flash messages 15
Nokia Xpress audio messages 15
Nokia Mail 15
Voice messages 16
Message settings 17
Contacts 17
Call log 18
Settings 18
Profiles 18
Tones 18
Display 18
Date and time 19
Shortcuts 19
Synchronisation and backup 19
Connectivity 19
Call and phone 21
Accessories 21
Configuration 21
Restore factory settings 22
Operator menu 22
Gallery 22
Applications 22
Alarm clock 22
Calendar and to-do list 22
Extras 23
Camera and video 23
FM radio 24
Voice recorder 25
Media player 25
Maps 26
About Maps 26
Nokia Map Loader 27
About GPS 27
GPS receiver 28
Navigate to your destination 28
Web or Internet 29
Connect to a web service 29
SIM services 29
Green tips 30
Save energy 30
Recycle 30
Learn more 30
2Contents

General information 31
Accessories 31
Battery 31
Battery and charger information 31
Nokia battery authentication
guidelines 32
Taking care of your device 32
Recycle 33
Additional safety information 33
Small children 33
Operating environment 33
Medical devices 33
Vehicles 34
Potentially explosive environments 34
Emergency calls 34
Certification information (SAR) 34
Index 35
Contents 3

Safety
Read these simple guidelines. Not following them may be dangerous or illegal. Read
the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or when
it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in aircraft, near medical
equipment, fuel, chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
4Safety

Support
When you want to learn more about how to use your product or you are unsure how
your device should function, see the user guide or see the support pages at
www.nokia.com/support or your local Nokia website, or with a mobile device,
www.nokia.mobi/support.
If this does not resolve your issue, do one of the following:
•Restart the device: switch off the device, and remove the battery. After about a
minute, replace the battery, and switch on the device.
•Restore the original factory settings as explained in the user guide.
•Update your device software regularly for optimum performance and possible new
features, as explained in the user guide.
If your issue remains unsolved, contact Nokia for repair options. See www.nokia.com/
repair. Before sending your device for repair, always back up the data in your device.
Get started
Insert SIM card and battery
Safe removal. Always switch the device off and disconnect the charger before removing
the battery.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1 Slide the back cover downwards, and remove it (1).
2 Remove the battery (2).
3 Insert the SIM card. Ensure the contact surface area is facing down and the bevelled
corner of the SIM card is facing the bottom of the device (3, 4, 5).
4 Replace the battery and the back cover (6, 7).
Insert a microSD card
Use only compatible microSD cards approved by Nokia for use with this device. Nokia
uses approved industry standards for memory cards, but some brands may not be fully
compatible with this device. Incompatible cards may damage the card and the device
and corrupt data stored on the card.
Support 5

Your phone supports microSD cards with a capacity of up to 8 GB.
A compatible memory card may be supplied with the device, and may already be
inserted in the device. If not, do the following:
1 Open the cover of the memory card slot.
2 Insert the card into the memory card slot with the contact surface facing up, and
press until it locks into place.
3 Close the cover of the memory card slot.
Remove the microSD card
Important: Do not remove the memory card during an operation when the card is
being accessed. Doing so may damage the memory card and the device, and corrupt
data stored on the card.
You can remove or replace the memory card during phone operation without switching
the device off, but you need to ensure that no application is currently accessing the
memory card.
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
6Getstarted

1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
3 When the device indicates a full charge, disconnect the charger from the device,
then from the wall outlet.
You do not need to charge the battery for a specific length of time, and you can use the
device while it is charging. If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display or before any calls can be
made.
GSM antenna
Your device may have internal and external antennas. Avoid touching the antenna area
unnecessarily while the antenna is transmitting or receiving. Contact with antennas
affects the communication quality and may cause a higher power level during operation
and may reduce the battery life.
The figure shows the GSM antenna area marked in grey.
Get started 7

Headset
Warning:
When you use the headset, your ability to hear outside sounds may be affected. Do not
use the headset where it can endanger your safety.
When connecting any external device or any headset, other than those approved by
Nokia for use with this device,to the Nokia AV Connector, pay special attention to volume
levels.
Do not connect products that create an output signal as this may cause damage to the
device. Do not connect any voltage source to the Nokia AV Connector.
Connect a USB data cable
Connect a compatible USB data cable to the USB connector.
To modify the USB settings, select Menu > Settings > Connectivity > USB data
cable and the desired mode.
Magnets and magnetic fields
Keep your device away from magnets or magnetic fields.
8Getstarted

Keys and parts
1Earpiece
2Display
3Selection keys
4Navi™ key (scroll key)
5Call key
6Keypad
7Maps key
8End/Power key
9Microphone
10 Camera lens
11 Loudspeaker
12 Wrist strap eyelet
13 Headset connector/Nokia AV Connector (3.5 mm)
14 Charger connector
15 Capture key
16 Micro USB cable connector
Get started 9

17 Memory card slot
Access codes
The security code helps to protect your device against unauthorised use. The preset
code is 12345. You can create and change the code, and set the device to request the
code. Keep the code secret and in a safe place separate from your device. If you forget
the code and your device is locked, your device will require service. Additional charges
may apply, and all the personal data in your device may be deleted. For more
information, contact a Nokia Care point or your device dealer.
The PIN code supplied with the SIM card protects the card against unauthorised use.
The PIN2 code supplied with some SIM cards is required to access certain services. If you
enter the PIN or PIN2 code incorrectly three times in succession, you are asked for the
PUK or PUK2 code. If you do not have them, contact your service provider.
The module PIN is required to access the information in the security module of your SIM
card. The signing PIN may be required for the digital signature. The barring password
is required when using the call barring service.
To set how your device uses the access codes and security settings, select Menu >
Settings > Security.
Switch on and off
Press and hold the power key.
Home screen
1Network signal strength
2Battery charge status
3Indicators
4Network name or the operator logo
5Clock
6Date (if the home screen mode is deactivated)
10 Get started

7Display
8Function of the left selection key
9Function of the scroll key
10 Function of the right selection key
Keypad lock
Lock the keypad
Select Menu, and press *within 2.5 seconds.
Unlock the keypad
Select Unlock, and press *within 1.5 seconds. If requested, enter the lock code.
Answer a call when the keypad is locked
Press the call key. When you end or reject a call, the keypad locks automatically.
Set automatic keypad lock
Select Menu > Settings > Phone > Automatic keyguard > On, and set the length of
time, after which the keypad locks.
When the device or keypad is locked, calls may be possible to the official emergency
number programmed into your device.
Functions without a SIM card
Some functions of your phone may be used without inserting a SIM card, such as
Organiser functions and games. Some functions appear dimmed in the menus and
cannot be used.
Applications running in background
Leaving applications running in the background increases the demand on battery power
and reduces the battery life.
Calls
Make and answer a call
Make a call
Enter the phone number, including the country and area code if necessary, and press
the call key.
Answer an incoming call
Press the call key.
Calls 11

Reject a call
Press the end key.
Adjust the volume
During a phone call, scroll up or down.
Loudspeaker
If available, you may select Loudsp. or Handset to use the loudspeaker or the earpiece
of the phone during a call.
Warning:
Continuous exposure to high volume may damage your hearing. Listen to music at a
moderate level, and do not hold the device near your ear when the loudspeaker is in
use.
Dialling shortcuts
Assign a phone number to a number key
Select Menu > Contacts > Speed dials, scroll to a desired number (2-9), and select
Assign. Enter the desired phone number, or select Search and a saved contact.
Activate speed dialling
Select Menu > Settings > Call > Speed dialling > On.
Make a call using speed dialling
In the standby mode, press and hold the desired number key.
Write text
Text modes
To enter text (for example, when writing messages) you can use traditional or predictive
text input.
When you write text, press and hold Options to switch between traditional text input,
indicated by , and predictive text input, indicated by . Not all languages are
supported by predictive text input.
The character cases are indicated by , , and .
To change the character case, press #. To change from the letter to number mode,
indicated by , press and hold #, and select Number mode. To change from the
number to the letter mode, press and hold #.
To set the writing language, select Options > Writing language.
12 Write text

Traditional text input
Press a number key, 2-9, repeatedly until the desired character appears. The available
characters depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait until the
cursor appears, and enter the letter.
To access the most common punctuation marks and special characters, press 1
repeatedly. To access the list of special characters, press *. To insert a space, press 0.
Predictive text input
Predictive text input is based on a built-in dictionary to which you can also add new
words.
1 Start writing a word, using the keys 2to 9. Press each key only once for one letter.
2 To confirm a word, scroll right or add a space.
•If the word is not correct, press *repeatedly, and select the word from the list.
•If the ? character is displayed after the word, the word you intended to write is
not in the dictionary. To add the word to the dictionary, select Spell. Enter the
word using traditional text input, and select Save.
•To write compound words, enter the first part of the word, and scroll right to
confirm it. Write the last part of the word, and confirm the word.
3 Start writing the next word.
Navigate the menus
The device functions are grouped into menus. Not all menu functions or option items
are described here.
In the home screen, select Menu and the desired menu and submenu.
Exit the current menu level
Select Exit or Back.
Return to the home screen
Press the end key.
Change the menu view
Select Menu > Options > Main menu view.
Messaging
Create and receive messages, such as text and multimedia, with your device. The
messaging services can only be used if your network or service provider supports them.
Navigate the menus 13

Text and multimedia messages
You can create a message and optionally attach, for example, a picture. Your phone
automatically changes a text message to a multimedia message when a file is attached.
Text messages
Your device supports text messages beyond the limit for a single message. Longer
messages are sent as two or more messages. Your service provider may charge
accordingly. Characters with accents, other marks, or some language options take more
space, and limit the number of characters that can be sent in a single message.
The total number of characters left and the number of messages needed for sending
are displayed.
To send messages, the correct message centre number must be stored in your device.
Normally, this number is set by default through your SIM card.
To set the number manually, do the following:
1 Select Menu > Messaging > More > Msg. settings > Text messages > Message
centre.
2 Enter the name and number supplied by your service provider.
Multimedia messages
A multimedia message can contain text, pictures, and sound or video clips.
Only devices that have compatible features can receive and display multimedia
messages. The appearance of a message may vary depending on the receiving device.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds
this limit, the device may make it smaller so that it can be sent by MMS.
Important: Exercise caution when opening messages. Messages may contain malicious
software or otherwise be harmful to your device or PC.
For availability and subscription to the multimedia messaging service (MMS), contact
your service provider.
Create a message
1 Select Menu > Messaging > Create message.
2 Write your message.
To insert a special character or a smiley, select Options > Insert symbol.
To attach an object to the message, select Options > Insert object. The message
type changes automatically to multimedia message.
3 To add recipients, select Send to and a recipient.
To enter a phone number or mail address manually, select Number or e-mail. Enter
a phone number, or select E-mail, and enter a mail address.
14 Messaging

4 Select Send.
Multimedia messages are indicated with an icon at the top of the display.
Service providers may charge differently depending on the message type. For details,
contact your service provider.
Flash messages
Flash messages are text messages that are instantly displayed upon reception.
Select Menu > Messaging.
1 Select More > Other messages > Flash message.
2 Write your message.
3 Select Send to and a contact.
Nokia Xpress audio messages
Create and send audio messages using MMS in a convenient way.
Select Menu > Messaging.
1 Select More > Other messages > Audio message. The voice recorder opens.
2 To record your message, select .
3 To stop recording, select .
4 Select Send to and a contact.
Nokia Mail
Access your mail account with your device to read, write, and send mail. This mail
application is different from the SMS mail function.
This function is not available in all regions.
Before you can use mail, you must have an mail account from an mail service provider.
For availability and the correct settings, contact your mail service provider. You may
receive the mail configuration settings as a configuration message.
Mail setup wizard
The mail setup wizard opens automatically if no mail settings are defined in the device.
To add an additional mail account, select Menu > Messaging and E-mail > New
account. Follow the instructions.
Write and send a mail
You may write your mail before connecting to the mail service.
1 Select Menu > Messaging > More > E-mail and Create e-mail.
Messaging 15

2 Enter the recipient’s mail address, the subject, and the mail message. To attach a
file, select Options > Insert.
3 If more than one mail account is defined, select the account from which you want
to send the mail.
4 Select Send.
Read a mail and reply
Important: Exercise caution when opening messages. Messages may contain malicious
software or otherwise be harmful to your device or PC.
Select Menu > Messaging.
Download mail headers
Select your mail account.
Download a mail and its attachments
Select a mail and Open or Retrieve.
Reply to or forward a mail
Select Options > Reply or Forward.
Disconnect from your mail account
Select Options > Disconnect. The connection to the mail account automatically ends
after some time without activity.
New mail notifications
Your device can automatically check your mail account at set intervals, and issue a
notification when new mail is received.
Select Menu > Messaging > More > E-mail.
1 Select E-mail settings > Edit mailboxes.
2 Select your mail account, Downloading sett., and the following options:
Update interval — Set how often your device checks your mail account for new
mail.
Automatic retrieval — Retrieve new mail automatically from your mail account.
3 To enable new mail notification, select E-mail settings > New e-mail notif..
Voice messages
The voice mailbox is a network service to which you may need to subscribe. For more
information, contact your service provider.
16 Messaging

Call your voice mailbox
Press and hold 1.
Edit your voice mailbox number
Select Menu > Messaging > More > Voice messages and Voice mailbox no..
Message settings
Select Menu > Messaging and More > Msg. settings.
Select from the following:
General settings — Save copies of sent messages in your device, overwrite old
messages if the message memory becomes full, and set up other preferences related to
messages.
Text messages — Allow delivery reports, set up message centres for SMS and SMS mail,
select the type of character support, and set up other preferences related to text
messages.
Multimedia msgs. — Allow delivery reports, set up the appearance of multimedia
messages, allow the reception of multimedia messages and advertisements, and set up
other preferences related to multimedia messages.
Service messages — Activate service messages, and set up preferences related to
service messages.
Contacts
You can save names and phone numbers in the device memory and on the SIM card. In
the device memory, you can save contacts with numbers and text items. Names and
numbers saved on the SIM card are indicated with .
Select Menu > Contacts > Names.
Add a contact
Select Options > Add new contact.
Add details to a contact
Ensure that the memory in use is either Phone or Phone and SIM. Scroll to a contact,
and select Details > Options > Add detail.
Search for a contact
Select Names. Scroll through the list of contacts, or enter the first characters of the
contact's name.
Copy a contact between the device memory and SIM card
Select Names, scroll to the contact, and select Options > More > Copy contact. On the
SIM card, you can save only one phone number for each name.
Contacts 17

To select the SIM card or device memory for your contacts, to select how the names and
numbers in the contacts list are displayed, and to view the memory capacity for contacts,
select Settings and the appropriate option.
You can send and receive a person's contact information as a business card from a
compatible device that supports the vCard standard.
Send a business card
Select a contact, Options > More > Business card, and the sending type.
Call log
To view the information on your calls, messages, data, and synchronisation, select
Menu > Log and from the available options.
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
Settings
Profiles
Waiting for a call, but can’t let your device ring? There are various settings groups called
profiles, which you can customise with ringing tones for different events and
environments.
Select Menu > Settings > Profiles.
Select the desired profile and from the following:
Activate — Activate the profile.
Personalise — Modify the profile settings.
Timed — Set the profile to be active until a certain time. When the time set for the
profile expires, the previous profile that was not timed becomes active.
Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones. You can find the same settings in the Profiles menu.
Display
To view or adjust the wallpaper, font size, or other features related to the device display,
select Menu > Settings > Display.
18 Call log

Date and time
Select Menu > Settings > Date and time.
Set the date and time
Select Date & time settings.
Set the date and time format
Select Date & time format.
Update the time automatically according to the current time zone
Select Auto-update of time (network service).
Shortcuts
With personal shortcuts, you can get quick access to frequently used phone functions.
Select Menu > Settings > My shortcuts.
Assign phone functions to the selection keys
Select Right selection key or Left selection key and a function from the list.
Select shortcut functions for the scroll key
Select Navigation key. Scroll to the desired direction, and select Change or Assign and
a function from the list.
Synchronisation and backup
Select Menu > Settings > Sync & backup.
Select from the following:
Synchronisation — Create a backup of your personal data to a Nokia server. Before
you start backing up data, you need to set up your My Nokia account. Select Connect,
and you are guided through the process of backing up data.
Phone switch — Synchronise or copy selected data, such as your contacts, calendar
entries, notes, or messages, between your device and another device.
Create backup — Back up selected data.
Restore backup — Restore data from a backup. To view the details of a backup file,
select Options > Details.
Data transfer — Synchronise or copy selected data between your device and a network
server (network service).
Connectivity
Your phone has several features that allow you to connect to other devices to transmit
and receive data.
Settings 19

Bluetooth wireless technology
Bluetooth technology allows you to connect your device, using radio waves, to a
compatible Bluetooth device or accessory that is within 10 metres (32 feet).
Select Menu > Settings > Connectivity > Bluetooth.
Set up a Bluetooth connection
1 Select My phone's name, and enter a name for your device.
2 Select Bluetooth > On. indicates that Bluetooth connectivity is active.
3 To connect your device to an audio accessory, select Conn. to audio acc. and the
device that you want to connect to.
4 To pair your device with any Bluetooth device in range, select Paired devices >
Add new device.
Scroll to a found device, and select Add.
Enter a passcode (up to 16 characters) on your device, and allow the connection on
the other Bluetooth device.
If you are concerned about security, deactivate the Bluetooth function, or set Phone
visibility to Hidden. Accept Bluetooth communication only from those you trust.
Connect your PC to the internet
You can use Bluetooth technology to connect your compatible PC to the internet without
the PC Suite software. Your device must be able to connect to the internet (network
service), and your PC must support Bluetooth technology. After connecting to the
network access point (NAP) service of the device, and pairing with your PC, your device
automatically opens a packet data connection to the internet.
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following
profiles: generic access, hands-free, headset, object push, file transfer, dial-up
networking, serial port, SIM access, and generic object exchange. To ensure
interoperability between other devices supporting Bluetooth technology, use Nokia
approved accessories for this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
Features using Bluetooth technology increase the demand on battery power and reduce
the battery life.
Packet data
General packet radio service (GPRS) is a network service that allows mobile phones to
send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data conn. and from the following options:
When needed — to establish the packet data connection when an application needs
it. The connection is closed when the application is terminated.
20 Settings