
Copyright. ã2000 - 2000. Nokia Mobile Phones.2(4)
1. PSION 5 CONFIGURATION
If Psion Message Suite is not installed on your device, please download it from www.psion.com and follow the
installation instructions given there. Message Suite is an integrated set of applications which provides email, fax and
web-browsing capabilities for the Psion Computers Series 5 handheld computer. This guide is for Message Suite
version 1.52. After successful installation of Psion Message Suite you can proceed with the Nokia 6250 specific steps
listed below:
1.1 General Rules About Infrared in the Nokia 6250
When you are making a connection (call) first activate the infrared reception in the Nokia 6250 by pressing Menu and
clicking the up button once and then clicking "Select"; then you can start the dialing procedure in the Psion. The
infrared connection is released when the call is ended.
1.2 Psion 5 Modem Configuration
1. Select ControlPanel
2. Select Modems
3. Select New
4. Type Name: Nokia 6250
5. Speed: 57600 (if you encounter problems in establishing connection between your Psion 5 and Nokia phone
please try lower speed)
6. Connect via: Infrared
7. Fax class: Auto
8. Goto to Initialisation leaflet and set Init.(reset)string:AT&F&K4
9. Go to Advanced leaflet and set Flowcontrol:Software(XON/XOFF)
10. In Advanced leaflet check that the Carrierdetect (DCD) is not checked
11. Click OK.
12. Current modem: Nokia 6250 – click OK
1.3 Psion 5 Dial-up Connection Configuration
1. Select ControlPanel
2. Select Internet
3. Select New
4. Select Based Upon: Standardsettings.–Press OK
5. The "New Internet Service" window should appear on the Psion screen.
6. Edit Service
6.1. Type Name (internet service provider)
6.2. Connection type: Dial-Up
6.3. Type PhoneNumber
7. Select Done
8. Select OK from "Internet Service Settings".
Now you should be ready to start using the Web browser application. If you have already performed the configuration
and you would like to edit the connection configuration select Edit instead of New in point number three in the list
above.
1.3.1 Making a Dial-up Connection
1. From Extras select Web. If the web browser will not start and Psion tells you that something is wrong in the
configuration, follow the instructions given to you on the screen.