Nokia N 80 Quick start guide

Configuring Real Player (Access Points)
1. Navigate to “Imaging” using the Menu button and select
2. Select the menu option “RealPlayer.”
3. Select “Options” and choose “Settings”
4. Select the menu option “Connection”
5. Select the menu option “Network”
(cont’d on next page)
Menu | Imaging | RealPlayer | Options | Settings | Connection | Network

Configuring Real Player (Access Points)
1. Highlight the menu option labeled “Default access point”
2. Select “Options” and choose “Change”
Select the current access point you are using from the list of previously defined
access points (WLAN/GPRS).*
*Note, if you change access point [WLAN->GPRS, GPRS->GPRS, etc..], and real player is unable to
stream, verify the access point in this menu option.
Menu | Imaging | RealPlayer | Options | Settings | Connection | Network | Options | Change

Configuring Real Player (Bandwidth Settings)
When experiencing bandwidth issues, or if realplayer returns the error “not
enough bandwidth, please check network settings.” Do the following:
•Select “Options” and choose “Advance settings”
•Select the connection you are experiencing the bandwidth issues with
[GPRS, EGPRS, UMTS or WLAN bandwidth]
•Selection “Options”and“User defined”
•Enter in a higher value* [ ex. GPRS =150kbps – 300kbps]
*Note, if you experience buffering issues, you will need to lower the speed set in step 4.
Menu | Imaging | RealPlayer | Options | Settings | Connection | Network | Options | Advance Settings