Nokia XL User manual

This document contains Nokia
confidential material. This
material cannot be shared except
with persons that have a valid
business reason to read this
content. You are personally
responsible to ensure recipients
of this document are aware of
information handling guidelines.
CONFIDENTIAL
© 2014 Nokia Company confidential

Send feedback
Recommend Change in
KICS
Rate this page in KICS
E-mail
ca[email protected]
Service Manual for L1 and L2
Nokia XL Dual SIM
RM-1030, RM-1042
Key features

Fastlane to Android™ apps

Dual SIM support

5.0" Display

1 GHz Dual-core CPU

5 MP Camera
Version 1.0
CHECK THE REPAIR
POLICY BEFORE
PERFORMING ANY
MECHANICAL REPAIR ON
SERVICE LEVEL 1&2!
Exploded view Disassembly steps
Assembly hints Solder components Service devices
Product controls and interfaces Service concept Phone reset
More More
More More More
More More More
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

Service Manual Level 1 an
d
2
Nokia XL Dual SI
M
RM-1030, RM-1042
V
ersion 1.
0
Version histor
y
Version Date Description
1.0 29.04.2014 First published version
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

Service Manual Level 1 and 2
Nokia XL Dual SIM
RM-1030, RM-1042
Version 1.0
Exploded view
SIDE KEY FLEX
I0006
LIGHT SWAP PWB
I0007
FRONT CAMERA GASKET
I0013
A-COVER
I0003
EARPIECE
I0004
FRONT CAMERA
I0019
TOP FLEX
I0020
FLASH LENS ADHESIVE
I0015
VIBRA ADHESIVE
I0016
SENSOR SUPPORT GASKET
I0014
CAMERA
I0018
CAMERA RUBBER
I0017
DISPLAY
I0002
IHF FLEX
I0005
PMU SHIELDING LID
I0008
IHF SPEAKER
I0012
TYPE LABEL
I0009
B-COVER
I0023
SPEAKER GASKET
I0011
D-COVER
I0010
TOUCH PANEL
I0001
SCREW TORX+ SIZE 4
M1.4 X 3.55
I0022
SCREW TORX+ SIZE 4
M1.6 x 4.55
I0021
LIGHT SWAP PACKAGE
(I0007 - I0009)
2
D-COVER ASSEMBLY
(I0010 - I0016)
3
A-COVER ASSEMBLY
(I0001 - I0005)
1
Only available
as assembly
Not reuseable
after removal
Repair/swap
only in level 3
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

Service Manual Level 1 an
d
2
Nokia XL Dual SI
M
RM-1030, RM-1042
V
ersion 1.0
Disassembly steps
1) For disassembling you need the Nokia Standard toolkit version 2. You will also need an AV jack.
2) Protect the A-COVER with protective film.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

3) Release the B-COVER by pushing down the bottom corners as shown.
4) Remove the B-COVER.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

5) Unscrew the four Torx+ size 4 screws in the order shown. Do not use them again. Discard them.
6) Unscrew the eight Torx+ size 4 screws in the order shown. Do not use them again. Discard them.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

7) Start releasing the D-COVER by first releasing the two shown clips on the left side of the device with the
SRT-6. Start from the top.
8) Then slide the SRT-6 along the bottom end and release the two shown clips.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

9) Then open the two shown clips on the right side.
10) Then slide the SRT-6 along the top end and release the three shown clips.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

11) Fold open the D-COVER as shown. Be careful not to damage the flexes.
12) Open the SIDE KEY FLEX connector with the SS-93. Be careful not to damage the connector or any
components nearby.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

13) Open the DISPLAY and TOUCH PANEL connectors. Be careful not to damage the connectors or any
components nearby.
14) Remove the D-COVER.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

15) Release one coner of the IHF FLEX with the dental tool and peel it off with tweezers. Be careful not to
injure yourself with the sharp end of the dental tool. Do not use the IHF FLEX again. Discard it.
16) Release the EARPIECE with the dental tool and remove it with tweezers. Do not use it again. Discard it.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

17) Release one part of the SIDE KEY FLEX with the dental tool and remove it with tweezers.
18) Open the CAMERA connector with the SS-93. Be careful not to damage the connector or any
components nearby.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

19) Grab the CAMERA RUBBER with tweezers and pull out the CAMERA including the CAMERA RUBBER.
20) Remove the CAMERA RUBBER from the CAMERA with tweezers.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

21) Start releasing the TOP FLEX by first opening the TOP FLEX connector with the SS-93. Be careful not
to damage the connector or any components nearby.
22) Then release the AV connector with an AV jack.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

23) Then release the rest of the flex gently with tweezers.
24) Then release the vibra with the SS-93.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

25) Finally release the sensor with the dental tool. Remove the TOP FLEX with tweezers.
26) Remove and discard the FLASH LENS ADHESIVE with the dental tool.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

27) Remove and discard the VIBRA ADHESIVE with tweezers.
28) Remove and discard the SENSOR SUPPORT GASKET with the dental tool.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

29) Open the FRONT CAMERA connector with the SS-93. Be careful not to damage the connector or any
components nearby.
30) Release the FRONT CAMERA with the SS-93 and remove it with tweezers.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

31) Remove and discard the FRONT CAMERA GASKET with the dental tool.
32) Release the three shown clips holding the ENGINE BOARD with the SS-93. Start from the top.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.