Nokia HS 26W - Headset - Over-the-ear User manual

Nokia Wireless Headset HS-26W
9253918/1
5
6
3
89
4
2
1
7

ENGLISH
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that
this HS-26W product is in compliance with
the essential requirements and other
relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity can be
found at http://www.nokia.com/phones/
declaration_of_conformity/.
The crossed-out wheeled bin
means that within the European
Union the product must be taken
to separate collection at the
product end-of-life. Do not dispose
of these products as unsorted municipal
waste. For more information, see product
Eco-Declaration or country specific
information at www.nokia.com.
© 2005-2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or
storage of part or all of the contents in this
document in any form without the prior
written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are
registered trademarks of Nokia Corporation.
Other product and company names
mentioned herein may be trademarks or
tradenames of their respective owners.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Nokia operates a policy of ongoing
development. Nokia reserves the right to
make changes and improvements to any of
the products described in this document
without prior notice.
Under no circumstances shall Nokia be
responsible for any loss of data or income or
any special, incidental, consequential or
indirect damages howsoever caused.
The contents of this document are provided
"as is". Except as required by applicable law,
no warranties of any kind, either express or
implied, including, but not limited to, the
implied warranties of merchantability and
fitness for a particular purpose, are made in
relation to the accuracy, reliability or
contents of this document. Nokia reserves
the right to revise this document or
withdraw it at any time without prior notice.

ENGLISH
The availability of particular products may
vary by region. Please check with the Nokia
dealer nearest to you.
Unauthorized changes or modifications to
this device may void the user's authority to
operate the equipment.
Export Controls
This device may contain commodities,
technology or software subject to export
laws and regulations from the US and other
countries. Diversion contrary to law is
prohibited.
Introduction
The Nokia Wireless Headset HS-26W
allows you to make and receive calls
while on the move. You can use the
headset with compatible phones that
support Bluetooth wireless
technology.
Read this user guide carefully before
using the headset. Also read the user
guide for your phone, which provides
important safety and maintenance
information. Keep all accessories and
enhancements out of the reach of
small children.
Bluetooth wireless technology
Bluetooth wireless technology allows
you to connect compatible devices
without cables. A Bluetooth
connection does not require that the
phone and the headset be in line of
sight, but both devices should be
within 10 meters (30 feet) of each
other. Connections may be subject to
interference from obstructions, such
as walls, or other electronic devices.
The headset complies with the
Bluetooth Specification 2.0 + EDR
that supports the Headset Profile 1.1
and Hands-Free Profile 1.5. Check

ENGLISH
with the manufacturers of other
devices to determine their
compatibility with this headset.
There may be restrictions on using
Bluetooth technology in some
locations. Check with your local
authorities or service provider.
Get started
The headset contains the following
parts shown on the title page: volume
key (1), power key (2), answer/end key
(3), indicator light (4), earphone (5),
microphone (6), and charger
connector (7).
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
Parts of the headset are magnetic.
Metallic materials may be attracted to
the headset. Do not place credit cards or
other magnetic storage media near the
headset, because information stored on
them may be erased.
Chargers
Check the model number of any charger
before using it with this headset. The
headset is intended for use with the
AC-3, AC-4, and DC-4 chargers.
Warning: Use only chargers
approved by Nokia for use
with this particular
enhancement. The use of any other types
may invalidate any approval or warranty
and may be dangerous.
For availability of approved
enhancements, please check with your
dealer. When you disconnect the power
cord of any enhancement, grasp and pull
the plug, not the cord.

ENGLISH
Charge the battery
The headset has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
from the headset, as you may damage
the headset.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
headset (8). The red indicator light
is on while charging. It may take a
while before charging starts. If
charging does not start, disconnect
the charger, plug it in again, and
retry. Charging the battery fully
may take up to 2 hours.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 5 hours of talk-time or up to
150 hours of standby time. However,
the talk and standby times may vary
when used with different mobile
phones or other compatible Bluetooth
devices, usage settings, usage styles,
and environments.
When battery power is low, the
headset beeps, and the red indicator
light starts to flash.
Switch the headset on or off
To switch on, press and hold the power
key until the headset beeps and the
green indicator light is displayed.
To switch off, press and hold the
power key until the red indicator light
is displayed briefly.
Pair the headset
1. Switch on your phone and the
headset.
2. Activate the Bluetooth feature on
the phone, and set the phone to
search for Bluetooth devices.

ENGLISH
3. Select the headset from the list of
found devices.
4. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may
need to make the connection
separately after pairing. You only
need to pair the headset with your
phone once.
If the pairing is successful, the
headset beeps and appears in the
phone menu where you can view the
currently paired Bluetooth devices.
To disconnect the headset from your
phone,switch off the headset or
disconnect it in the Bluetooth menu of
your phone.
To connect the headset to your phone,
make the connection in the Bluetooth
menu of your phone, or press and hold
the answer/end key. To set your phone
to connect with the headset
automatically when the headset is
switched on, change your paired
device settings in the Bluetooth menu.
Basic use
Wear the headset
Place the headset over your ear and
slide it downwards (9). Point the
headset toward your mouth (9).
Call handling
To make a call, use your phone in the
normal way when the headset is
connected to your phone.
If your phone supports last number
redialing with the headset, press the

ENGLISH
answer/end key twice briefly when no
call is in progress.
If your phone supports voice dialing
with the headset, press and hold the
answer/end key when no call is in
progress, and proceed as described in
the user guide of your phone.
To answer or end a call, press the
answer/end key. To reject a call, briefly
press the answer/end key twice.
To adjust the earphone volume, press
the volume key up or down.
To mute or unmute the microphone
during a call, briefly press the middle
of the volume key.
To switch the call between the
headset and a compatible phone,
press and hold the answer/end key.
Clear the settings or reset the
headset
To clear all the settings from the
headset, press and hold the power key
and the volume key up for 10 seconds.
To reset the headset if it stops
functioning, although it is charged,
plug the headset into a charger, and
briefly press the power key and the
middle part of the volume key.
Battery information
Your headset is powered by a
rechargeable battery. The battery can be
charged and discharged hundreds of
times, but it will eventually wear out.
Recharge your battery only with Nokia
approved chargers designated for this
headset.
Unplug the charger from the electrical
plug and the headset when not in use. Do
not leave a fully charged battery

ENGLISH
connected to a charger, since
overcharging may shorten its lifetime. If
left unused, a fully charged battery will
lose its charge over time.
Never use any charger that is damaged.
Leaving the headset in hot or cold places,
such as in a closed car in summer or
winter conditions, will reduce the
capacity and lifetime of the battery.
Always try to keep the battery between
15°C and 25°C (59°F and 77°F). A headset
with a hot or cold battery may not work
temporarily, even when the battery is
fully charged. Battery performance is
particularly limited in temperatures well
below freezing.
Do not dispose of batteries in a fire as
they may explode. Batteries may also
explode if damaged. Dispose of batteries
according to local regulations. Please
recycle when possible. Do not dispose as
household waste.
Care and maintenance
Your device is a product of superior
design and craftsmanship and should be
treated with care. The following
suggestions will help you protect your
warranty coverage.
• Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If your
device does get wet, allow it to dry
completely.
• Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
• Do not store the device in hot areas.
High temperatures can shorten the
life of electronic devices, damage
batteries, and warp or melt certain
plastics.

ENGLISH
• Do not store the device in cold areas.
When the device returns to its normal
temperature, moisture can form
inside the device and damage
electronic circuit boards.
• Do not attempt to open the device.
• Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device.
• Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
All of the above suggestions apply
equally to your device, battery, charger,
or any enhancement. If any device is not
working properly, take it to the nearest
authorized service facility for service.