Nokia NSC-1 SERIES Configuration guide

Programmes After Market Services
NSC-1 Series Transceivers
Issue 4 03/01  Nokia Mobile Phones Ltd.
General Information and
NAM Programming

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 2  Nokia Mobile Phones Ltd. Issue 4 03/01

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 3
CONTENTS Page No
Product Selection ........................................................................................................... 5
Handportables ................................................................................................................ 5
Desktop Option ............................................................................................................6
Basic Car Kit (CARK-64) Options................................................................................ 8
Advanced Hands Free Car Installation (CARK-91) Options......................................... 9
Product List.................................................................................................................. 10
Module List.................................................................................................................. 11
Standard Color front covers......................................................................................... 11
Technical Specifications .............................................................................................. 12
General Specifications of Transceiver NSC-1 ...........................................................12
Transceiver NSC-1 Introduction.................................................................................. 13
Functional Description ...............................................................................................13
Interconnection Diagram ...........................................................................................14
Nokia 5160/5120 cellular telephone (NSC-1*/NSW-1*) NAM programming .......... 14
Menu Driven Easy NAM Programming ....................................................................15
Complete NAM Programming Instructions................................................................. 15
Access NAM Programming Mode: ...........................................................................15
MAIN MENU Selection ............................................................................................15
Programming NAM 1 and 2 ......................................................................................16
Programming the Security Code: ...............................................................................16
Programming Emergency numbers: ..........................................................................16
Serial Number (ESN): ................................................................................................17
Programmed: (Date the phone is first programmed) .................................................17
Exiting NAM Programming: .....................................................................................17
Field test: ...................................................................................................................17
Programming PSIDS and RSIDS: .............................................................................18

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 4  Nokia Mobile Phones Ltd. Issue 4 03/01

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 5
Product Selection
Handportables
The NSC-1 is a handportable dualband/dualmode mobile telephone for the TDMA 800
network.
Item: Name: Type code: Material code:
1. Transceiver (See Variant Section)
2. Standard battery (NiMH 900 mAh) BMS-2 0670203
3. AC Travel Charger (Euro plug) 207-253 Vac ACP-7E 0675144
4. AC Travel Charger (US plug) 198-242 Vac ACP-7C 0675158
5. AC Travel Charger (UK plug) 207-253 Vac
AC Travel Charger (UK plug) 180-220 Vac ACP-7X
ACP-7H 0675145 0675146
6. AC Travel Charger (Australia) 216-264 Vac ACP-7A 0675148
1.
2.
3. 4.
5.
6.
ACP–7E
ACP–7U
ACP–7C
ACP–7X
ACP–7H
ACP–7A

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 6  Nokia Mobile Phones Ltd. Issue 4 03/01
Desktop Option
The desktop option allows the user to charge the handportable and spare battery from
mains.
Item: Name: Type code: Material code:
1. Desktop stand DCH-9 0675174
2. AC Travel Charger (Euro plug) 207-253 Vac ACP-7E 0675144
3. AC Travel Charger (US plug) 108-132 Vac
AC Travel Charger (US plug) 198-242 Vac ACP-7U ACP-7C 0675143 0675158
4. AC Travel Charger (UK plug) 207-253 Vac
AC Travel Charger (UK plug) 180-220 Vac ACP-7X ACP-7H 0675145 0675146
5. AC Travel Charger (Australia) 216-264 Vac ACP-7A 0675148
6. Fast Travel Charger (Euro plug) 90-264 Vac ACP-9E 0675149
7. Fast Travel Charger (US plug) 90-264 Vac ACP-9U 0675151
8. Fast Travel Charger (UK plug) 90-264 Vac ACP-9X 0675150
9. Fast Travel Charger (Australia) 90-264 Vac ACP-9A 0675152
1.
3.
4.
5.
2.
6.
7.
8.
9.

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 7
Item: Name: Type code: Material
code:
10. Performance Travel Charger (Euro plug) 90-264 Vac ACP-8E 0675195
10. Performance Travel Charger (Korea plug) 90-264 Vac ACP-8K 0675119
11. Performance Travel Charger (UK plug) 90-264 Vac ACP-8X 0675197
12. Performance Travel Charger (US plug) 90-264 Vac ACP-8U 0675196
12. Performance Travel Charger (China plug) 90-264 Vac ACP-8C 0675211
13. Performance Travel Charger (Australia plug) 90-264 Vac ACP-8A 0675214
ACP–8E
ACP–8K
ACP–8U
ACP–8C
ACP–8A
ACP–8X
10.
11.
12.
13.

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 8  Nokia Mobile Phones Ltd. Issue 4 03/01
Basic Car Kit (CARK-64) Options
Item: Name: Type code: Material code:
1. Transceiver See variant Appendices
2. Mobile Holder MBC-1 0700060
3. Cigarette Lighter Charger LCH-9 0657120
4. Swivel Mount HHS-9 0620037
1.
3.
4.
2.

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 9
Advanced Hands Free Car Installation (CARK-91) Options
Item: Name: Type code: Material code:
1. Transceiver See variant Appendices
2. Mobile Holder MCC-1 0620043
3. Hands Free Unit HFU-2 0694049
4. Hands Free Microphone HFM-8 0690016
5. Hands Free Speaker HFS-12 0692008
6. Power Cable PCH-4J 0730055
7. Swivel Mount HHS-9 0620037
8. Mounting Plate MKU-1 0620036
1.
3.
4.
5.
2.
6.
7.
8.

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 10  Nokia Mobile Phones Ltd. Issue 4 03/01
Product List
Unit/type: Product code:
Transceiver NSC-1 See variant
Appendixes
Slim Battery BLS-2 900 mAh 0670206
Standard Battery BMS-2 900 mAh 0671323
Standard Battery BMS-2S 900 mAh NiMH 0670225
Vibrator Battery BMS-2V 900 mAh + 0670204
Extended Battery BLS-4 1500 mAh 0670207
AC Travel Charger ACP-7E (EUR) 207-253 Vac 0675144
AC Travel Charger ACP-7U (US) 108-132 Vac 0675143
AC Travel Charger ACP-7C (US) 198-242 Vac 0675158
AC Travel Charger ACP-7X (UK) 207-253 Vac 0675145
AC Travel Charger ACP-7H (UK) 180-220 Vac 0675146
AC Travel Charger ACP-7X (AUS) 216-264 Vac 0675148
Fast Travel Charger ACP-9E (EUR) 90-264 Vac 0675149
Fast Travel Charger ACP-9U (US) 90-264 Vac 0675151
Fast Travel Charger ACP-9X (UK) 90-264 Vac 0675150
Fast Travel Charger ACP-9A (AUS) 90-264 Vac 0675152
Performance Travel Charger ACP-8E (EUR) 90-264 Vac 0675195
Performance Travel Charger ACP-8K (KOR) 90-264 Vac 0675199
Performance Travel Charger ACP-8X (UK) 90-264 Vac 0675197
Performance Travel Charger ACP-8U (US) 90-264 Vac 0675196
Performance Travel Charger ACP-8C (CHINA) 90-264 Vac 0675211
Performance travel Charger ACP-8A (AUS) 90-264 Vac 0675214
Cigarette Lighter Charger LCH-9 0675174
Desktop Stand DCH-9 0675174
Desktop Stand DCH-8
Mobile Holder MBC-1 0700060
Mobile Holder MCC-1 0620043
Handsfree Unit HFU-2 0694049
Power Cable PCH-4J 0730055
HF Microphone HFM-8 0690016
HF Speaker HFS-12 0692008

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 11
Module List
Standard Color front covers
Mounting Plate MKU-1 0620036
Swivel Mount HHS-9 0620037
Headset HDC-9 0694053
Headset HDC-9P 0694063
Belt Clip BCH-12 0720098
External Antenna Cable XRC-1 0730103
External Antenna Cable XRC-2 0730180
Name of module Type code: Material code: Notes
Basic transceiver NSC-1 0502418 Basic TR and recess for logo plate
- System/RF module UT4S 0201301
- User interface module UE4S 0201360
- Mechanics assembly parts MNSC1 0261802 Common parts for NSC-1
- A-cover assembly parts 9456243 Night blue, recess for logo label
- Blue A-cover assembly 9490242 LCD/speaker gasket/power key/key-
mat
- Grey A-cover assembly 9490247 LCD/speaker gasket/power key/key-
mat
- SBC blue A-cover assembly 9491941 LCD/speaker gasket/power key/key-
mat
- Window assembly parts 9457839
- Antenna 0660166
- Keymat 9790318
- Software module (Basic SW ) 0240647 On flash memory
Color: Part code:
Tango Orange 0261857
Antiqua Red 0261858
Gheko Green 0261859
Bermuda Blue 0261860
Dolphin Silver 0261861

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 12  Nokia Mobile Phones Ltd. Issue 4 03/01
Technical Specifications
General Specifications of Transceiver NSC-1
Parameter Unit
Cellular system TDMA 800
RX frequency band 869.04 ... 893.97 MHz
TX frequency band 824.04 ... 848.97 MHz
Output power up to 600 mW
Duplex spacing 45 MHz
Number of RF channels 831
Channel spacing 30 kHz
Number of TX power levels 2 - 7 in analog; 2 - 10 in digital modes
Frequency control VCTCXO; AFC used in analog and digital modes
Receiver type Double conversion, common IF frequencies in all modes
Modulator type I/Q modulation in digital modes, FM modulation in analog modes

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 13
Transceiver NSC-1 Introduction
The NSC-1 is a radio transceiver unit for TDMA 800 networks. The transceiver is a true
3Vtransceiver.
The transceiver consists of the System/RF module (US4RSM), User Interface module
(UE4S), and assembly parts.
The purpose of the Baseband module is to control the phone and process audio signals to
and from RF. The module also controls the user interface.
The transceiver features a full graphic display and two soft-key based user interfaces.
The antenna is a fixed helix. External antenna connection is provided by the rear RF con-
nector.
The transceiver has a leak-tolerant earpiece and (noise cancelling) microphone.
User-changeable front covers make it easy to vary the transceiver color.
Functional Description
There are five different operation modes:
• power off mode — only the circuits needed for power up are supplied.
• sleep mode — circuits are powered down, and only the sleep clock
runs.
• active mode — all the circuits are supplied with power, although some
parts might be in the idle state part of the time.
• charge mode — consists of two different states (i.e., charge mode and
maintenance mode). The charge mode is effective in parallel with all
previous modes.
• local mode — used for alignment and testing.

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 14  Nokia Mobile Phones Ltd. Issue 4 03/01
Interconnection Diagram
Nokia 5160/5120 cellular telephone (NSC-1*/NSW-1*)
NAM programming instructions
All Nokia 5160/5120 cellular telephones (with software version 1.6 or later) are capable
of supporting both Random and Default authentication methods. The programmer must
decide which form of A-Key is desired for use. There are two methods to program the
NAM described below.
If a RANDOM A-Key is desired for use, use the Easy NAM 1 programming sequence.
If a DEFAULT A-Key is required, then use the Easy NAM 2 sequence. The clear key can be
used to correct mistakes.
Module
User Interface
UE4S
Module
System/RF
US4RSM
Keypad Display
Battery
System
RF
Connector
Connector
Charger
Antenna
2
3 + 36+2
Earpiece
1
10 9
2
4
28
(including Mic)

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 15
Menu Driven Easy NAM ProgrammingRAMMING FOR NOKIA 6120/6
1 Turn on the phone and enter the Programming Access Code
*#6391# for NAM1 with a random A-key value
*#6392# for NAM2 with a default A-key value
2 Enter the 10 digit Area Code and Phone Number
and press the TALK key (or the ”OK” softkey in the display)
3 Enter the System ID Code (SID) supplied by the cellular service provider
(1 -5 digit SID) and press the TALK key (or ”OK” softkey in the display)
– Optional settings are Language and Lock Code (see below)
– Programming is completed
– The phone automatically powers off and then back on
NOTE: Change the Lock code by adding a pound sign (#) and the new lock code after the SID.
(Example: 175#7788; Lock code = 7788).
Change the Language by adding a pound sign and new language code after the code
(Example: 175#0; Language = English).
LanguageCode: 0 (default) = English, 1 = French, 2 = Spanish, 3 = Portuguese.
Change the Lock Code and Language code by separating each set of numbers by a pound sign
(Example: 175#7788#2; Where the SID = 00175, Lock code = 7788, Language = Spanish).
Complete NAM Programming InstructionsnENNDPORTABLES
Access NAM Programming Mode:
1 Turn the phone on.
2 Enter the NAM access code.
Factory default is: * 3 0 0 1 # 1 2 3 4 5 #
3 If the screen to the right appears, the access code
was entered correctly.
If after several attempts you cannot access NAM programming, it is possible that
the NAM 2 access code has been changed, or the phone is in need of service.
MAIN MENU Selection
4 Press the [Scroll-Key] up or down until the indicator points at the desired menu
option. Select from the following:
5 Press the [Select] softkey to access the Sub-Menu from and of the above Main
NAM 1 NAM 2 Security Emergency
SW version Serial No. Field Test

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 16  Nokia Mobile Phones Ltd. Issue 4 03/01
Menu selections.
Programming NAM 1 and 2
6 If the value is incorrect, press the [Select] softkey and use the keypad to enter
new information.
7Usethe[OK] softkey to store the new information that has been entered.
8 Repeat steps 6 and 7 for the remaining NAM parameter options to be viewed
and/or changed.
9 To program other NAM, press [Back] to return to the Main Menu. Select
NAM 2 Once the Home System ID and Own number are programmed, the phone
will automatically set the NAM Status to enabled.
Programming the Security Code:
10 From the Main Menu, use the Scroll keys to select the “Security” Sub-Menu,
press [Select] and the current 5-digit security code will appear in the display.
Default is 12345
11 If you wish to change the Security Code at this time, use the numeric keys to
enter the new value.
12 Press the softkey [OK] to store changes. Note: The Lock Code will be automati-
cally changed to the last 4 digits of the new Security Code.
Programming Emergency numbers:
13 From the Main Menu use the Scroll key to select the ”Emergency” Sub-Menu,
press the [Select] softkey to access the emergency numbers.
Home
system ID Home SOC (when unlocked) Own number Alpha tag PSID/RSID lists Change defaults
Change Defaults (sub-menu from above)
NAM Status
(Enable/Disable) Access method Local option Primary paging channel
Secondary paging ch Dedicated A cch Dedicated A cch number Dedicated B cch
Dedicated B cch number Overload class Group ID SID alpha tag
control
A-key code

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 17
Emergency number 1 (911)
Emergency number 2 (*911)
Emergency number 3 (None)
14 If you wish to change the displayed value, use the Scroll key to select the emer-
gency number you wish to change and press [Select]. Then use the numeric keys
to enter the new values
15 To save the value, press the softkey [OK].
16 Press [Back] to exit the menu.
Serial Number (ESN):
17 From the Main Menu, use the Scroll key to display the “Serial No.” or ESN of the
phone.
18 Press [Back] to exit the menu.
Programmed: (Date the phone is first programmed)
19 From the Main Menu, use the key to display the “Programmed” menu.
20 Press [Select] and enter a four digit number that corresponds to the month and
year the phone is sold. Example (mmyy)
0199 = January 1999, 0401 = April 2001.
NOTE: This menu location can be programmed only one time. Once the date has been entered it
cannot be changed. Any attempt to enter the menu once it has been programmed will receive a short
beep and the message “Date already saved”.
Exiting NAM Programming:
21 To exit the NAM programming mode, turn the phone off and leave it off for five
seconds.
Field test:
The Field Test Display Mode is used to investigate how the phone and the cellular net-
work are interfacing together.
The Field Test Display Mode reports valuable information about the signal strength, bat-
tery charging status, cellular state, and encryption status.
The information is organized to display information relating to Analog Control Channels,
Digital Control Channels, Analog Voice Channels, and Digital Voice channels. All the
information provided in this display is in accordance with IS-136.
To activate the Field Test Display Mode you must be in NAM programming. Instructions
for entering NAM programming are on the previous pages.

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 18  Nokia Mobile Phones Ltd. Issue 4 03/01
From the Main Menu use the Scroll key to display the ”Field test” menu and press the
[Select] softkey.
Use the Scroll key to select “Enable” and press the [OK] softkey.
Turn the 5160/5120 off, then back on. The FIELD TEST display will begin automatically
after wake-up as long as the user does not enter any characters into the display.
Scroll through the 6 different displays using the Scroll key.
To disable the FIELD TEST mode. Return to NAM programming and disable the function
under the FIELD TEST menu.
Programming PSIDS and RSIDS:
The Nokia 5160/5120 provides the option to program Private (PSIDs) and Residential
(RSIDs) System IDs as prescribed by IS-136. The PSID / RSID list is programmed to sup-
port system selection / re-selection processes, and SID display functions. The Nokia
5160/5120 product will support up to 15 different Private or Residential Systems. These
instructions allow a person to program 5 of the 15 available locations. The other 10 loca-
tions are reserved to ensure locations are available for automatic programming.
Using the NAM programming menu to program the PSID / RSID is just one of several
ways that this information can be programmed. The phone also supports automatic pro-
gramming of the PSID / RSID values via registration accept message from a Public & Pri-
vate system, manually prompting with System Scan sub-menu option “New Search”, or
via Over the Air Programming. Follow these instructions to program the PSID / RSID lists.
1 Enter the NAM programming menu and select NAM 1 (or the desired NAM).
(Note: PSID / RSID is currently only available in the NAM 1 location.
PSID / RSID locations for NAM 2 are reserved for future use.)
2 Use the Scroll key to display “PSID / RSID LISTS” then press [Select].
3 Use the Scroll key to select the PSID / RSID 1 or the desired
PSID / RSID (1 through 5). Press the [Select] softkey.
4 Each list contains:
System type: Select Private or Residential system type.
PSID / RSID: System ID of the Private or Residential system. Indicates which
PSID / RSID the mobile will respond to.
Connected System ID: Connected System ID. The SID to which the
PSID / RSID is connected.
Alpha tag: The name of the Private or Residential SID that will be displayed
when the phone uses the PSID / RSID. The micro system can overwrite the alpha

PAMS Technical Documentation General Information and NAM Programming
NSC-1
Issue 4 03/01  Nokia Mobile Phones Ltd. Page 19
tag once the phone is using the system with its network broadcast name.
Operator code (SOC): (SOC) This is the System Operator Code.
These (inter)national SOC values are only an approximation from available infor-
mation. Please call Customer Service (888-Nokia-2U) with corrections.
Country code: Enter the Country Code of the PSID / RSID.
Public service profiles: Contains up to four channel and color code values for
each private or residential system. This information is necessary to initiate scan-
ning for the Private or Residential System.
Private operating frequencies: Enter the channel number(s) of the private sys-
tem. The parameters allow for up to four channels per PSID / RSID.
US
AWS = 2049,
Canada
Rogers Cantel Inc. = 2050,
Bell South Cellular = 2051,
Southwestern Bell Mobile Systems = 004,
Vanguard = 007,
Century Cellunet = 008,
Pacific Telecom Cellular = 009,
Midwest Wireless Communications = 010,

NSC-1
General Information and NAM Programming PAMS Technical Documentation
Page 20  Nokia Mobile Phones Ltd. Issue 4 03/01
This page intentionally left blank.