Nortel 703t Manual

CallPilot
Release 4.0
Document Number: 555-7101-226
Document Version: Standard 1.04
October 2006
703t Server Hardware Installation

Standard 1.04
2CallPilot
Copyright © 2006 Nortel Networks.
All Rights Reserved.
The information in this document is subject to change without notice. The
statements, configurations, technical data, and recommendations in this
document are believed to be accurate and reliable, but are presented
without express or implied warranty. Users must take full responsibility
for their applications of any products specified in this document. The
information in this document is proprietary to Nortel Networks.
The process of transmitting data and call messaging between the CallPilot
server and the switch or system is proprietary to Nortel Networks. Any
other use of the data and the transmission process is a violation of the user
license unless specifically authorized in writing by Nortel Networks prior
to such use. Violations of the license by alternative usage of any portion of
this process or the related hardware constitutes grounds for an immediate
termination of the license and Nortel Networks reserves the right to seek
all allowable remedies for such breach.
Trademarks
*Nortel Networks, the Nortel Networks logo, the Globemark, and Unified
Networks, BNR, CallPilot, DMS, DMS-100, DMS-250, DMS-MTX,
DMS-SCP, DPN, Dualmode, Helmsman, IVR, MAP, Meridian, Meridian
1, Meridian Link, Meridian Mail, Norstar, SL-1, SL-100, Succession,
Supernode, Symposium, Telesis, and Unity are trademarks of Nortel
Networks.
3COM is a trademark of 3Com Corporation.
ADOBE is a trademark of Adobe Systems Incorporated.
ATLAS is a trademark of Quantum Corporation.
BLACKBERRY is a trademark of Research in Motion Limited.

October 2006
703t Server Hardware Installation 3
CRYSTAL REPORTS is a trademark of Seagate Software Inc.
EUDORA is a trademark of Qualcomm.
eTrust and InoculateIT are trademarks of Computer Associates Think Inc.
DIRECTX, EXCHANGE.NET, FRONTPAGE, INTERNET
EXPLORER, LINKEXCHANGE, MICROSOFT, MICROSOFT
EXCHANGE SERVER, MS-DOS, NETMEETING, OUTLOOK,
POWERPOINT, VISUAL STUDIO, WINDOWS, WINDOWS MEDIA,
and WINDOWS NT are trademarks of Microsoft Corporation.
GROUPWISE and NOVELL are trademarks of Novell Inc.
LOGITECH is a trademark of Logitech, Inc.
McAfee and NETSHIELD are trademarks of McAfee Associates, Inc.
MYLEX is a trademark of Mylex Corporation.
NETSCAPE COMMUNICATOR is a trademark of Netscape
Communications Corporation.
NOTES is a trademark of Lotus Development Corporation.
NORTON ANTIVIRUS and PCANYWHERE are trademarks of
Symantec Corporation.
QUICKTIME is a trademark of Apple Computer, In.
RADISYS is a trademark of Radisys Corporation.
SLR4, SLR5, and TANDBERG are trademarks of Tandberg Data ASA.
SYBASE is a trademark of Sybase, Inc.
TEAC is a trademark of TEAC Corporation
US ROBOTICS, the US ROBOTICS logo, and SPORTSTER are
trademarks of US Robotics.

Standard 1.04
4CallPilot
WINZIP is a trademark of Nico Mark Computing, Inc.
XEON is a trademark of Intel, Inc.
All other trademarks and registered trademarks are the property of their
respective owners.
Information for Japan
Japan Denan statement
The following applies to server models 1005r, 703t, and 1002rp:
Japan VCCI statement
The following applies to server models 1005r, 703t, 201i, and 1002rp:
この装置は、情報処理装置等電波障害自主規制協議会 (VCCI) の規定に基づくク
ラス A 装置です。この装 置を家庭環境で使用すると電波妨害を引き起こすこと
Warning
Please be aware of the following while installing the equipment:
xPlease use the connecting cables, power cord, and AC adaptors
shipped with the equipment or specified by Nortel to be used with the
equipment. If you use any other equipment, it may cause failures,
malfunctioning or fire.
xPower cords shipped with this equipment must not be used with any
other equipment. If the above guidelines are not followed, it may lead
to death or severe injury.
㩷
ᧄ⵾ຠ䉕቟ో䈮䈗૶↪㗂䈒䈢䉄䇮એ䈱䈖䈫䈮䈗ᵈᗧ䈒䈣䈘䈇䇯㩷
䃂㩷ធ⛯䉬䊷䊑䊦䇮㔚Ḯ䉮䊷䊄䇮㪘㪚䉝䉻䊒䉺䈭䈬䈱ㇱຠ䈲䇮ᔅ䈝⵾ຠ䈮ห󰩠䈘䉏䈩䈍䉍䉁䈜㩷
󰵾ઃຠ䉁䈢䈲ᜰቯຠ䉕䈗૶↪䈒䈣䈘䈇䇯󰵾ઃຠ䊶ᜰቯຠએᄖ䈱ㇱຠ䉕䈗૶↪䈮䈭䉎䈫᡿
㓚䉇േ૞⦟䇮Ἣἴ䈱ේ࿃䈫䈭䉎䈖䈫䈏䈅䉍䉁䈜䇯㩷
䃂㩷ห󰩠䈘䉏䈩䈍䉍䉁䈜ઃዻ䈱㔚Ḯ䉮䊷䊄䉕ઁ䈱ᯏེ䈮䈲૶↪䈚䈭䈇䈪䈒䈣䈘䈇䇯 㩷 㩷 㩷 㩷 㩷 㩷 㩷
⸥ᵈᗧ㗄䉕቞䉌䈭䈇䈫䇮ᱫ䉇ᄢᕋᚒ䈭䈬り᡿䈱ේ࿃䈫䈭䉎䈖䈫䈏䈅䉍䉁䈜䇯㩷

October 2006
703t Server Hardware Installation 5
があります。この場合には使用者が適切な対策を取るように要求されることがあ
ります。
This is a Class A product based on the standard of the Voluntary Control
Council for Interference by Information Technology Equipment (VCCI).If
this equipment is used in a domestic environment, radio disturbance may
occur, in which case, the user may be required to take corrective action.

Standard 1.04
6CallPilot

703t Server Hardware Installation 7
Publication history
October 2006 Standard 1.04 of 703t Server Hardware
Installation is issued for general release for
CallPilot 4.0.
September 2006 Standard 1.03 of 703t Server Hardware Installation
is issued for general release for CallPilot 4.0.
April 2006 Standard 1.02 of 703t Server Hardware Installation
is issued for general release for CallPilot 4.0.
July 2005 Standard 1.01 of 703t Server Hardware Installation
is issued for general release for CallPilot 4.0.
July 2005 Standard 1.0 of 703t Server Hardware Installation
is issued for general release for CallPilot 4.0.
November 2004 Standard 1.0 of the CallPilot Installation and
Configuration, 703t Server Hardware Installation
is issued for general release for CallPilot 3.0.
November 2003 Standard 1.0 of the CallPilot Installation and
Configuration, 703t Server Hardware Installation
is issued for general release.

8CallPilot
Publication history Standard 1.04

703t Server Hardware Installation 9
Task List
To unpack the equipment ............................................................... 37
To remove the side panel ............................................................... 39
To inspect the server interior........................................................... 42
To replace the side cover ............................................................. 43
To install the chassis feet ............................................................. 45
To install the server ......................................................................... 48
To set the modem DIP switches...................................................... 51
To connect the mouse, keyboard, and monitor to the server .......... 55
To connect the modem to the server............................................... 55
To connect the server to the ELAN
(Meridian 1 or Succession 1000 only) ............................................ 58
To connect the server to the CLAN ................................................. 60
To install the software feature dongle ............................................. 62
To connect the server to power....................................................... 65
To start the server ........................................................................... 65

Task List Standard 1.04
10 CallPilot

703t Server Hardware Installation 11
Contents
1How to get Help 13
2703t server description 15
Server features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Slot assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Network connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Supported peripheral devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Reference documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3Preinstallation requirements 33
Installation overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Unpacking the 703t server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Removing the side cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Inspecting the server interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Replacing the side cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installing the chassis feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
4Installing the server and connecting the peripheral
devices 47
Installing the server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Preparing the modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Connecting peripherals to the server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Connecting the server to the ELAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Connecting the server to the CLAN (optional). . . . . . . . . . . . . . . . . . . . . . 60
Installing the Nortel software feature dongle . . . . . . . . . . . . . . . . . . . . . . . 61
Connecting the server to power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Index 67

Contents Standard 1.04
12 CallPilot

703t Server Hardware Installation 13
Chapter 1
How to get Help
This section explains how to get help for Nortel products and services.
Getting Help from the Nortel Web site
The best way to get technical support for Nortel products is from the Nortel
Technical Support Web site:
http://www.nortel.com/support
This site provides quick access to software, documentation, bulletins, and
tools to address issues with Nortel products. More specifically, the site
enables you to:
download software, documentation, and product bulletins
search the Technical Support Web site and the Nortel Knowledge Base
for answers to technical issues
sign up for automatic notification of new software and documentation for
Nortel equipment
open and manage technical support cases
Getting Help over the phone from a Nortel Solutions Center
If you don’t find the information you require on the Nortel Technical
Support Web site, and have a Nortel support contract, you can also get help
over the phone from a Nortel Solutions Center.
In North America, call 1-800-4NORTEL (1-800-466-7835).

How to get Help Standard 1.04
14 CallPilot
Outside North America, go to the following Web site to obtain the phone
number for your region:
http://www.nortel.com/callus
Getting Help from a specialist by using an Express Routing
Code
To access some Nortel Technical Solutions Centers, you can use an Express
Routing Code (ERC) to quickly route your call to a specialist in your Nortel
product or service. To locate the ERC for your product or service, go to:
http://www.nortel.com/erc
Getting Help through a Nortel distributor or reseller
If you purchased a service contract for your Nortel product from a
distributor or authorized reseller, contact the technical support staff for that
distributor or reseller.

703t Server Hardware Installation 15
Chapter 2
703t server description
In this chapter
Server features 16
Slot assignments 23
Network connectivity 25
Supported peripheral devices 30
Reference documents 31

703t server description Standard 1.04
16 CallPilot
Server features
This section provides a general overview of the 703t server.
Server dimensions
Height chassis only: 420 mm (16.75 in.)
with chassis feet: 440 mm (17.5 in.)
Width chassis only: 215 mm (8.6 in.)
with chassis feet: 320 mm (12.7 in.)
Depth (distance from front to
back)
650 mm (26 in.)
Clearance front: 250 mm (10 in.)
rear: 125 mm (5 in.)
side: 75 mm (3 in.)
Note: Additional side clearance
is required for service.
top: 75 mm (3 in.)
Weight of fully loaded system
with
two SCSI hard drives
six populated boards
CD-ROM drive
floppy drive
tape drive
approximately 22 kg (46 lb)

October 2006 703t server description
703t Server Hardware Installation 17
Environmental specifications
Environmental condition Specification
Operating temperature 10°C to 35°C (50°F to 95°F)
Maximum rate of change must not
exceed 10°C (50°F) per hour.
Non-operating (storage)
temperature
-40°C to 70°C (-40°F to 158°F)
Non-operating humidity 95%, non-condensing at 30°C (86°F)
Altitude 1829 m (6000 ft)
Electrostatic discharge 15 kV or more
Acoustic noise 50 dBA in a typical office ambient
temperature (18°C to 25°C
[64.4°F to 77°F])
Operating shock No errors with a half sine wave shock
of 2G (with 1 millisecond duration)
Handling drop Operational after a free fall from
450 mm to 600 mm (18 in. to 24 in.)
(depending on weight)

703t server description Standard 1.04
18 CallPilot
Front panel features
The following diagram shows the 703t server’s front panel features:
G101759
CD-ROM
drive
CD
drawer
eject
button
Tape
drive
Network LEDs
Sleep mode
button (not used)
Power button
Status LEDs
USB connector
(future use)
Floppy disk drive
Floppy disk
eject button
Hard
drive
bays
Reset button
Air flow
slot
Chassis intrusion
detection switch
(not used)
Air flow
slots

October 2006 703t server description
703t Server Hardware Installation 19
The table below describes the parts that are identified in the preceding
diagram:
Part Function
Reset button Triggers a hardware (cold) reset. Do not use
this button to perform a server restart. Restart
the server as described in “Restarting the
server” in the Installation and Configuration
Task List (555-7101-210).
Network
controller LEDs
(green)
Left: 10/100Base-T controller LED
(NIC1 10/100 MB: ELAN
for Meridian 1*/Succession 1000*connection)
Right: 10/100/1000Base-T controller LED
(NIC2 1 GB: CLAN
for Customer LAN connection)
Sleep mode button Not used
Power button Turns the server’s power on or off.
Status LEDs Indicates when the server is powered up and
the disk drives are active.
Left: hard drive activity LED (not used)
Center: power/sleep LED (green)
Right: status LED (bi-color) indicates
whether the server is functioning properly,
or whether a hardware event has occurred.
USB connector For future use
Floppy disk eject
button
Ejects the floppy disk.
Floppy drive Drive for 3-1/2 inch diskettes.

703t server description Standard 1.04
20 CallPilot
IDE CD-ROM drive
(5.25 in.)
Enables you to use the CallPilot software and
documentation CD-ROMs.
CD drive eject
button
Opens the CD-ROM drawer. Push the button
again to close the drawer.
Backup tape drive Allows backup of hard drive data.
Hard drive 1 10,000 rpm hard drive
Hard drive 2 10,000 rpm hard drive
Drive bay Vacant
Drive bay Vacant
Drive bay Vacant
Air flow slot Must remain empty for proper system cooling.
Part Function