Nortel Passport 8600 Series User manual

Nortel Ethernet Routing Switch 8600
Installation — Modules
Release: 5.0
Document Revision: 02.02
www.nortel.com
NN46205-304 312749-L Rev 02
.

Nortel Ethernet Routing Switch 8600
Release: 5.0
Publication: NN46205-304
Document status: Standard
Document release date: 16 June 2008
Copyright © 2008 Nortel Networks
All Rights Reserved.
Printed in Canada and the United States of America
LEGAL NOTICE
While the information in this document is believed to be accurate and reliable, except as otherwise expressly
agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF
ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are
subject to change without notice.
Nortel, the Nortel logo, the Globemark, and Passport are trademarks of Nortel Networks.
Velcro is a trademark of Velcro Industries B.V.
PowerPC is a trademark of International Business Machines Corp.
All other trademarks are the property of their respective owners.
ATTENTION
For information about the regulatory and safety precautions, read "Regulatory Messages and Safety
Precautions" in this guide.
For a list of safety messages and their translations, see "Translations of Safety Messages" in this
document.
.

3
.
Contents
Regulatory Information and Safety Precautions 7
New in this release 19
Features 19
RS modules 19
Other changes 19
Modules and power information 19
PCMCIA cards 20
Auto-Negotiation 20
SFP, XFP, and GBIC specifications 20
Hot swapping procedures 20
Document changes 20
Introduction 21
Ethernet Routing Switch 8600 module fundamentals 23
Release 3.x module feature set 24
Release 4.x module feature set 24
Release 5.x module feature set 26
Ethernet Routing Switch 8600 modes 27
M mode configuration requirements 28
R mode configuration requirements 28
Chassis slots and modules 29
Module removal and switch behavior considerations 29
SAM and WSM modules 30
ATM modules 30
SF/CPU modules 30
Interface module descriptions 30
8608GBE and 8608GBM modules 31
8608GTE and 8608GTM modules 33
8608SXE module 35
8616GTE module 36
8616SXE module 38
8624FXE module 39
8632TXE and 8632TXM modules 41
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

4
8648TXE and 8648TXM modules 43
8672ATME and 8672ATMM modules 45
8683POSM module 46
8630GBR module 48
8648GTR module 50
8683XLR module 52
8683XZR module 54
8612XLRS module 56
8634XGRS module 58
8648GBRS module 61
8648GTRS module 62
Nortel-qualified SFPs, XFPs, and GBICs 64
SFPs, XFPs, R and RS modules, and power consumption 66
SF/CPU modules 67
8691 SF/CPU module 67
8692 SF/CPU module 72
Enterprise Enhanced CPU daughter card 77
8661 SSL Acceleration Module 78
SAM LEDs 79
SAM maintenance port 80
Web Switching Module 80
WSM and slots 81
WSM LEDs 81
Automatic selection of redundant connections 82
Module installation and connection 85
Job aid: avoiding ESD 87
Removing a filler panel 87
Installing a filler panel 88
Removing a module 89
Installing a module 93
Installing a PCMCIA card in the SF/CPU module 97
Protecting PCMCIA card files 99
Installing the Enterprise enhanced CPU daughter card 100
Connecting a PC or terminal to the SF/CPU or WSM 103
Connecting a modem to the SF/CPU 104
Connecting a network management station to the SF/CPU 105
Connecting and managing cables 106
Job aid: required cables 108
Technical specifications 113
General specifications 114
8608GBE and 8608GBM modules 117
8608GTE and 8608GTM modules 117
Port connectors 118
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

5
8608SXE module 119
8616GTE module 120
8616SXE module 121
8624FXE module 123
8632TXE and 8632TXM modules 124
8648TXE and 8648TXM modules 125
8672ATME and 8672ATMM modules 126
8683POSM module 128
8612XLRS module 129
8630GBR module 130
8634XGRS module 131
8648GBRS module 132
8648GTR module 132
8648GTR port connectors 133
8648GTRS module 134
8683XLR module 135
8683XZR module 136
8660 SDM 137
8661 SAM 138
WSM 139
8691 SF/CPU module 140
8691 SF/CPU Management port 141
8691 SF/CPU Console port 142
8691 SF/CPU Modem port 142
8692 SF/CPU module 143
8692 SF/CPU Management port 144
8692 SF/CPU Console port 145
8692 SF/CPU modem port 145
Port density for Ethernet Routing Switch 8600 modules 146
Translations of Safety Messages 151
Navigation 151
Class A electromagnetic interference caution statement 151
Electromagnetic interference caution statement 152
Electrostatic discharge caution statement 154
Laser eye safety warning statement 155
Index 159
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

6
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

7
.
Regulatory Information and Safety
Precautions
Read the information in this section to learn about regulatory conformities
and compliances.
International Regulatory Statements of Conformity
This is to certify that the Nortel 8000 Series chassis and components
installed within the chassis were evaluated to the international regulatory
standards for electromagnetic compliance (EMC) and safety and were
found to have met the requirements for the following international
standards:
•EMC—Electromagnetic Emissions—CISPR 22, Class A
•EMC—Electromagnetic Immunity—CISPR 24
•Electrical Safety—IEC 60950, with CB member national deviations
Further, the equipment has been certified as compliant with the national
standards as detailed in the following sections.
National Electromagnetic Compliance (EMC) Statements of
Compliance
FCC Statement (USA only)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy. If it is not installed and used in accordance
with the instruction manual, it may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case users will be required to take
whatever measures may be necessary to correct the interference at their
own expense.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

8Regulatory Information and Safety Precautions
ICES Statement (Canada only)
Canadian Department of Communications Radio Interference
Regulations
This digital apparatus (8000 Series chassis and installed components)
does not exceed the Class A limits for radio-noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
Règlement sur le brouillage radioélectrique du ministère des
Communications
Cet appareil numérique (8000 Series chassis) respecte les limites de bruits
radioélectriques visant les appareils numériques de classe A prescrites
dans le Règlement sur le brouillage radioélectrique du ministère des
Communications du Canada.
CE Marking Statement (Europe only)
EN 55 022 Statements
This is to certify that the Nortel 8000 Series chassis and components
installed within the chassis are shielded against the generation of radio
interference in accordance with the application of Council Directive
2004/108/EC. Conformity is declared by the application of EN 55 022
Class A (CISPR 22).
CAUTION
This device is a Class A product. Operation of this equipment
in a residential area is likely to cause harmful interference, in
which case users are required to take appropriate measures
necessary to correct the interference at their own expense.
EN 55 024 Statement
This is to certify that the Nortel 8000 Series chassis is shielded against the
susceptibility to radio interference in accordance with the application of
Council Directive 2004/108/EC. Conformity is declared by the application
of EN 55 024 (CISPR 24).
EN 300386 Statement
The Ethernet Routing Switch 8000 Series chassis complies with the
requirements of EN 300386 V1.3.3 for emissions and for immunity for a
Class A device intended for use in either Telecommunications centre or
locations other than telecommunications centres given the performance
criteria as specified by the manufacturer.
EC Declaration of Conformity
This product conforms to the provisions of the R&TTE Directive
1999/5/EC.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

National Electromagnetic Compliance (EMC) Statements of Compliance 9
European Union and European Free Trade Association (EFTA) Notice
All products labeled with the CE marking comply with R&TTE Directive
(1999/5/EEC) which includes the Electromagnetic Compliance (EMC)
Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC)
issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following
European Norms (ENs). The equivalent international standards are listed
in parenthesis.
•EN 55022 (CISPR 22)–Electromagnetic Interference
•EN 55024 (IEC 61000-4-2, -3, -4, -5, -6, -8, -11)–Electromagnetic
Immunity
•EN 61000-3-2 (IEC 610000-3-2)–Power Line Harmonics
•EN 61000-3-3 (IEC 610000-3-3)–Power Line Flicker
VCCI Statement (Japan/Nippon only)
This is a Class A product based on the standard of the Voluntary Control
Council for Interference (VCCI) for information technology equipment.
If this equipment is used in a domestic environment, radio disturbance
may arise. When such trouble occurs, the user may be required to take
corrective actions.
BSMI Statement for 8010, 8006 and 8003 Chassis (Taiwan only)
This is a Class A product based on the standard of the Bureau of
Standards, Metrology and Inspection (BSMI) CNS 13438, Class A.
MIC Notice for 8010, 8006, 8003 Chassis (Republic of Korea only)
This device has been approved for use in Business applications only per
the Class A requirements of the Republic of Korea Ministry of Information
and Communications (MIC). This device may not be sold for use in a
non-business application.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

10 Regulatory Information and Safety Precautions
National Safety Statements of Compliance
CE Marking Statement (Europe only)
EN 60 950 Statement
This is to certify that the Nortel 8000 Series chassis and components
installed within the chassis are in compliance with the requirements of EN
60 950 in accordance with the Low Voltage Directive. Additional national
differences for all European Union countries have been evaluated for
compliance. Some components installed within the 8000 Series chassis
may use a nickel-metal hydride (NiMH) and/or lithium-ion battery. The
NiMH and lithium-ion batteries are long-life batteries, and it is very possible
that you will never need to replace them. However, should you need to
replace them, refer to the individual component manual for directions on
replacement and disposal of the battery.
NOM Statement 8010, 8006, and 8003 Chassis (Mexico only)
The following information is provided on the devices described in this
document in compliance with the safety requirements of the Norma Oficial
Méxicana (NOM):
Exporter: Nortel Networks, Inc.
4655 Great America Parkway
Santa Clara CA 95054 USA
Importer: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Col. San Jose Insurgentes
Deleg-Benito Juarez
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

National Safety Statements of Compliance 11
México D.F. 03900
Tel: [phone]
Fax: [phone]
Input: Model 8003AC:
100-240 VAC, 50-60 Hz, 9 A maximum for each power
supply
Model 8004AC:
100-240 VAC, 50-60 Hz, 12-6 A maximum for each
power supply
Model 8005AC:
100-120 VAC, 50-60 Hz, 16 A maximum for each
power supply
200-240 VAC, 50-60 Hz, 8.5 A maximum for each
power supply
Model 8005DI AC:
100-120 VAC, 50-60 Hz, 16 A maximum for each
power supply
200-240 VAC, 50-60 Hz, 9.3 A maximum for each
power supply
Model 8004DC:
48-60 VDC, 29-23 A
Model 8005DC:
48-60 VDC, 42-34 A
Información NOM (unicamente para México)
La información siguiente se proporciona en el dispositivo o en los
dispositivos descritos en este documento, en cumplimiento con los
requisitos de la Norma Oficial Méxicana (NOM):
Exportador: Nortel Networks, Inc.
4655 Great America Parkway
Santa Clara, CA 95054 USA
Importador: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

12 Regulatory Information and Safety Precautions
Col. San Jose Insurgentes
Deleg-Benito Juarez
México D.F. 03900
Tel: [phone]
Fax: [phone]
Embarcar a: Model 8003AC:
100-240 VCA, 50-60 Hz, 9 A max. por fuente de poder
Model 8004AC:
100-240 VCA, 50-60 Hz, 12-6 A max. por fuente de
poder
Model 8005AC:
100-120 VCA, 50-60 Hz, 16 A max. por fuente de
poder
200-240 VCA, 50-60 Hz, 9.5 A max. por fuente de
poder
Model 8005DI AC:
100-120 VCA, 50-60 Hz, 16 A max por fuente de poder
200-240 VCA, 50-60 Hz, 9.3 A max por fuente de
poder
Model 8004DC:
-48 VCD, 29 A
Model 8005DC:
-48 VCD, 42 A
Denan Statement (Japan/Nippon only)
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

Safety Messages 13
Safety Messages
This section describes the different precautionary notices used in this
document. This section also contains precautionary notices that you must
read for safe operation of the Nortel Ethernet Routing Switch 8600.
NoticesNotice paragraphs alert you about issues that require your attention.
The following sections describe the types of notices. For a list of safety
messages used in this guide and their translations, see "Translations of
safety messages".
Attention Notice
ATTENTION
An attention notice provides important information regarding the installation and
operation of Nortel products.
Caution ESD Notice
CAUTION
ESD
ESD notices provide information about how to avoid discharge
of static electricity and subsequent damage to Nortel products.
CAUTION
ESD (décharge électrostatique)
La mention ESD fournit des informations sur les moyens de
prévenir une décharge électrostatique et d’éviter d’endommager
les produits Nortel.
CAUTION
ACHTUNG ESD
ESD-Hinweise bieten Information dazu, wie man die
Entladung von statischer Elektrizität und Folgeschäden an
Nortel-Produkten verhindert.
CAUTION
PRECAUCIÓN ESD (Descarga electrostática)
El aviso de ESD brinda información acerca de cómo evitar
una descarga de electricidad estática y el daño posterior a los
productos Nortel.
CAUTION
CUIDADO ESD
Os avisos do ESD oferecem informações sobre como evitar
descarga de eletricidade estática e os conseqüentes danos aos
produtos da Nortel.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

14 Regulatory Information and Safety Precautions
CAUTION
ATTENZIONE ESD
Le indicazioni ESD forniscono informazioni per evitare scariche
di elettricità statica e i danni correlati per i prodotti Nortel.
Caution Notice
CAUTION
Caution notices provide information about how to avoid possible
service disruption or damage to Nortel products.
CAUTION
ATTENTION
La mention Attention fournit des informations sur les moyens
de prévenir une perturbation possible du service et d’éviter
d’endommager les produits Nortel.
CAUTION
ACHTUNG
Achtungshinweise bieten Informationen dazu, wie man mögliche
Dienstunterbrechungen oder Schäden an Nortel-Produkten
verhindert.
CAUTION
PRECAUCIÓN
Los avisos de Precaución brindan información acerca de
cómo evitar posibles interrupciones del servicio o el daño a los
productos Nortel.
CAUTION
CUIDADO
Os avisos de cuidado oferecem informações sobre como evitar
possíveis interrupções do serviço ou danos aos produtos da
Nortel.
CAUTION
ATTENZIONE
Le indicazioni di attenzione forniscono informazioni per evitare
possibili interruzioni del servizio o danni ai prodotti Nortel.
Warning Notice
WARNING
Warning notices provide information about how to avoid
personal injury when working with Nortel products.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

Safety Messages 15
WARNING
AVERTISSEMENT
La mention Avertissement fournit des informations sur
les moyens de prévenir les risques de blessure lors de la
manipulation de produits Nortel.
WARNING
WARNUNG
Warnhinweise bieten Informationen dazu, wie man
Personenschäden bei der Arbeit mit Nortel-Produkten
verhindert.
WARNING
ADVERTENCIA
Los avisos de Advertencia brindan información acerca de cómo
prevenir las lesiones a personas al trabajar con productos
Nortel.
WARNING
AVISO
Os avisos oferecem informações sobre como evitar ferimentos
ao trabalhar com os produtos da Nortel.
WARNING
AVVISO
Le indicazioni di avviso forniscono informazioni per evitare danni
alle persone durante l’utilizzo dei prodotti Nortel.
Danger High Voltage Notice
DANGER
Danger—High Voltage notices provide information about how to
avoid a situation or condition that can cause serious personal
injury or death from high voltage or electric shock.
DANGER
La mention Danger—Tension élevée fournit des informations
sur les moyens de prévenir une situation ou une condition qui
pourrait entraîner un risque de blessure grave ou mortelle à la
suite d’une tension élevée ou d’un choc électrique.
DANGER
GEFAHR
Hinweise mit Vorsicht – Hochspannung“ bieten Informationen
dazu, wie man Situationen oder Umstände verhindert, die zu
schweren Personenschäden oder Tod durch Hochspannung
oder Stromschlag führen können.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

16 Regulatory Information and Safety Precautions
DANGER
PELIGRO
Los avisos de Peligro-Alto voltaje brindan información acerca
de cómo evitar una situación o condición que cause graves
lesiones a personas o la muerte, a causa de una electrocución
o de una descarga de alto voltaje.
DANGER
PERIGO
Avisos de Perigo—Alta Tensão oferecem informações sobre
como evitar uma situação ou condição que possa causar graves
ferimentos ou morte devido a alta tensão ou choques elétricos.
DANGER
PERICOLO
Le indicazioni Pericolo—Alta tensione forniscono informazioni
per evitare situazioni o condizioni che potrebbero causare gravi
danni alle persone o il decesso a causa dell’alta tensione o di
scosse elettriche.
Danger Notice
DANGER
Danger notices provide information about how to avoid a
situation or condition that can cause serious personal injury or
death.
DANGER
La mention Danger fournit des informations sur les moyens de
prévenir une situation ou une condition qui pourrait entraîner un
risque de blessure grave ou mortelle.
DANGER
GEFAHR
Gefahrenhinweise stellen Informationen darüber bereit, wie
man Situationen oder Umständen verhindert, die zu schweren
Personenschäden oder Tod führen können.
DANGER
PELIGRO
Los avisos de Peligro brindan información acerca de cómo
evitar una situación o condición que pueda causar lesiones
personales graves o la muerte.
DANGER
PERIGO
Avisos de perigo oferecem informações sobre como evitar uma
situação ou condição que possa causar graves ferimentos ou
morte.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

Safety Messages 17
DANGER
PERICOLO
Le indicazioni di pericolo forniscono informazioni per evitare
situazioni o condizioni che potrebbero causare gravi danni alle
persone o il decesso.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

18 Regulatory Information and Safety Precautions
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

19
.
New in this release
The following sections detail what’s new in Nortel Ethernet Routing Switch
8600 Installation — Modules, NN46205-304 for Release 5.0.
•“Features” (page 19)
•“Other changes” (page 19)
Features See the following section for information about feature changes:
RS modules
Release 5.0 introduces four new modules, termed RS modules. See
“Release 5.x module feature set” (page 26), and:
•“8612XLRS module” (page 56) and Table 59 "8612XLRS module
specifications" (page 129)
•“8634XGRS module” (page 58) and Table 63 "8634XGRS module
specifications" (page 131)
•“8648GBRS module” (page 61) and Table 65 "8648GBRS module
specifications" (page 132)
•“8648GTRS module” (page 62) and Table 70 "8648GTRS module
specifications" (page 134)
Other changes
See the following sections for information about changes that are not
feature-related:
Modules and power information
Information about SFP and XFP power consumption is added to “SFPs,
XFPs, R and RS modules, and power consumption” (page 66). As well,
power specifications are updated for most modules. See “Technical
specifications” (page 113).
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.

20 New in this release
PCMCIA cards
“Installing a PCMCIA card in the SF/CPU module” (page 97) and
“Protecting PCMCIA card files” (page 99) are added to this document.
Auto-Negotiation
Auto-Negotiation information is moved to Nortel Ethernet Routing Switch
8600 Configuration — Ethernet Modules, NN46205-503.
SFP, XFP, and GBIC specifications
Specifications for SFPs, XFPs, and GBICs are found in Nortel Ethernet
Routing Switch 8600 Installation — SFP, XFP, GBIC, and OADM
Hardware Components, NN46205-320.
Hot swapping procedures
The following procedures are moved to Nortel Ethernet Routing Switch
8600 Upgrades — Software Release 5.0, NN46205-400:
•Replacing a SF/CPU module in a single CPU chassis
•Hot swapping the Master SF/CPU module in a dual CPU chassis
•Hot swapping the Slave SF/CPU module in a dual CPU chassis
•Hot swapping an I/O module
Document changes
This document is reformatted to comply with the Nortel Customer
Documentation Standards. For more information about these standards,
see Nortel Ethernet Routing Switch 8600 Documentation Roadmap,
NN46205-103.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.