NorthVision VisionShare User manual

Be Your Vision!

Q & A: Receiver install position
The best location to place the
receiver with an interactive display
2

Q & A: Receiver
3
To place the receiver with a projector Receiver signal strength at different locations

Q & A: Receiver
4
No Image showson the screen
Check if power adaptor is 5V/4A
and if power adapter is well
connected
Make sure your display supports
1920*1080 resolution
Select correct input
source
Receiver power supply in 5V/4A Display resolution support above
1920*1080p

Q & A: Transmitter
5
How to play the button?
Press the center NorthVision logo to
“Play” and “Pause” the image
Can I pair the transmitter with another
receiver?
Press the transmitter button for 10 seconds
then release, it proceeds pairing process
automatically
10 seconds

Q & A: Transmitter
6
No LED light bar when plug
in to HDMI port Make sure your transmitter devices are fully charged
No Signal / No Lighting
1. Charging Station 2. Micro USB
Make sure your transmitter is well
positioned in the charging station
Make sure the micro
USB cable is
connected to the
transmitter
Power supply in station: 5V/4A
Power supply in micro USB: 5V/1.5A

Q & A: Transmitter
7
Fails to Charge
When first time use or if there is a long time with no
use, please make sure the transmitter battery has
charged over 8 hours before use

Q & A: Image issue
8
Image shows black when press
play button?
A1: Display resolution doesn’t support
input resolution
A2: Adjust input resolution to match or
change it to 1920x1080 or 3840x2160
1920x1080
or
3840x2160
No image shows
A1: Didn’t press the button properly
A2: Pressed too many times the button
Press 2, 3,4,5 times⋯

Q & A: Signal issue
9
Signal issue: No signal or
image is disconnected The best way to use Visionshare
No Signal

Q & A: Menu setting
10
Unable to navigate into
VisionShare system setting
A1: Make sure your input source (keyboard/mouse/touch
display) supportsHID code
A2: Make sure the USB cable is connected between the
display and the receiver
No Signal
TypeB
(Display)
TypeA
(Receiver)
Set up button

Q & A: Menu setting
11
How to use“Mirroring360” with personal devices?
Step1:
Connect the ethernet cable to your
receiver and make sure the IP address is
displayed on the screen
Step2:
Android/Windows/Chrome system:
Download and install “Mirroring360” on
your Android devices before use.
iOS/MAC system:
Use “Airplay” function to mirror the image
wirelessly
Download link:
www.NorthVIsion.com/download
Step3:
Open Mirroring360 from main menu, find
correct IP address and connect.
Make sure your BYOD is connected to the
same network
Mirroring360 button
Ethernet cable