Norvado Potenza ST User manual

Norvado Locations
Cable, WI Location
43705 US Hwy 63
Cable, WI 54821-4616
[phone]
Hayward, WI Location
15818 Railroad Street
Hayward, WI 54843-7110
[phone]
Ashland, WI Location
1310 Lake Shore Drive East
Ashland, WI 54806-2162
[phone]
REMINDERS
Set Reminders: While viewing the guide, highlight
the program where you want a reminder and press
OK.
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond
to the Potenza ST Universal Remote Control after
trying all of the codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the remote control, press TV once;
it will blink once. Then press and hold
SETUP until the TV key blinks twice.
3. Type 9 9 1. The TV key will blink twice
4. Aim the remote control at the TV and
press POWER once.
5. Press and release the CH+ key
continuously, then stop when the TV
turns off.
NOTE: In the search mode, the remote control
will send IR codes from its library to the selected
device, starting with the most popular code rst.
6. Press POWER. The TV should turn on,
then press SETUP once to lock in the
code. The LED will blink twice to indicate
that the code is saved.
NOTE: If the TV does not turn on during
step 6, then slowly press and release
CH- to go back through the codes, then
press SETUP when the TV turns on.
7. To search for the codes of your other devices,
repeat steps 1 through 6, but substitute the
appropriate key (e.g., VCR, DVD, AUD, or STB)
for the device you are searching for.
PARENTAL CONTROLS
There are several ways to use Parental Controls.
From the Main Menu, select My Settings. Arrow to
the right, highlight Parental and press the OK button.
You will then be in the Parental Controls menu to:
Change PIN:
Select the Change PIN category to enter your new PIN
and conrm it. Until you change it, the default PIN is
0000.
Edit Locked Channels:
You can lock entire channels via the Edit Locked
category so that it requires a PIN to view
programming. You may prevent locked channels from
showing in the channel guide via the Parental Control
Options (locked channels would still be accessible
using the number keys and entering a PIN).
Set Program Rating Limits:
To control the types of programming that can be
viewed, you may set program limits based on motion-
picture ratings (G, PG, R, etc.) or TV ratings (TV-
G,TV-14, etc.) using the Set Ratings category. If you
attempt to tune to a channel that is airing a program
with a rating at or above your rating limit, you must
enter a PIN to view the program.
Set Time Restrictions:
The Time Restrictions category allows you to set time
periods per day where television access requires a
PIN. These time restrictions may be set by selecting
the Green button to Add Restriction under the Time
Restrictions category.
Cancel Override:
Cancel Override category allows any previous PIN
overrides for an extended period of time to be
cancelled. Once the override has been cancelled, the
parental PIN will need to be used for all Locked and
Rated channels.
REMOTE CONTROL
GUIDE
TM
www.norvado.com
Computer Support: [phone]
Mailing Address: P.O. Box 67 | Cable, WI 54821
V316

PROGRAM BACKLIT REMOTE
FOR TV:
1. Manually turn ON the device (TV) that you
want to setup on the remote.
2. Press and release the TV key.
3. Press and Hold SETUP until the TV key blinks
twice.
4. Press and release the TV key. The TV key
stays lit.
5. Find your device and brand from the list below
and note the DIGIT key (#) assigned to your
brand. Press and hold down the DIGIT key (#)
for your device/brand while pointing the remote
to the device.
6. Let go of the key when your device turns OFF.
Setup for that device is complete.
1 = Insignia
2 = LG
3 = Panasonic
4 = Philips/Magnavox
5 = Samsung
6 = Sanyo
7 = Sharp
8 = Sony
9 = Vizio
0 = Westinghouse
MASTER POWER FEATURE
(BACKLIT REMOTE):
1. Press and release STB button.
2. Press and hold SET-UP until STB blinks twice.
3. Enter 9 9 5.
4. Press the POWER Button.
5. Press TV button then STB button.
6. Press and hold SET-UP until STB blinks twice.
7. Press and release STB button, Finished.
REMOTE CONTROL QUICK GUIDE
TV, AUD, DVD, VCR, STB
Use one remote to control multiple devices.
Setup
Use for programming sequences of devices controlled by the
remote.
Skip Forward, Skip Back, REW, PLAY, FFWD, STOP,
Pause, Record
In STB mode, these control the DVR functions. In other modes,
these can control a VCR, DVD Player or PVR.
Menu
Displays the menu.
Guide
Opens the Interactive Program Guide.
Day +/-
Jump ahead or back one day in the Interactive Program Guide.
Red, Green, Yellow, Blue
Access additional features on your set-top box. Functionality
changes per screen.
Vol +/-
Raise or lower the volume.
Mute
Turn the sound off or on.
Aspect Ratio*
Temporarily change the conversion mode from Original Size or Fit
to Screen.
Input
In TV control mode, will change the input of the device you are
controlling.
Power
Turn on/off a selected device.
Live
Return to watching live TV.
List
Display a list of recorded, future and series rules on your DVR.
Info
Display the current channel and program information. Press again for
more detail.
Browse, Search, Arrow and OK
Navigate and select onscreen choices.
Exit
Exit the current screen.
Page +/-
Page up or down in lists and lnteractive Program Guide.
Channel +/-
Changes to the next higher or lower channel.
On Demand
Access video on demand services.
Last
Recall the last channel you were watching.
FAV
View your favorite channels.
Number Keys (0-9)
Directly select a channel or enter options.
*If Available