Nostalgia Electrics NCCRT510PK User manual

All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2022 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 05/25/22 DJ)

NCCRT510PK
Professional Cotton Candy Cart
Fabricante Profesional de Algodón de Azúcar
Fabricant Professionnel de Barbe à Papa
Instructions and Recipes
Instrucciones y Recetas
Instructions et Recettes

ENGLISH
2
Make everyday a party!
Visit www.nostalgiaproducts.com for more fun products.
CONTENTS
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ADDITIONAL IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SAFETY
Appliance Specications:
120 Volts, 60 Hz
700 Watts
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
Refer to www.nostalgiaproducts.com/user-manuals/ for the most updated manual.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can
cause serious injury to you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.

ENGLISH
3
IMPORTANT SAFEGUARDS
A person who has not read and understood all operating and safety instructions
is not qualied to operate this appliance. All users of this appliance must read and
understand this Instruction Manual before operating or cleaning this appliance.
When using electrical appliances, basic safety precautions
should always be followed, including:
1. Read all instructions before operating this appliance.
2. DO NOT TOUCH the hot surfaces. Use handles or knobs.
3. This appliance is NOT A TOY.
4. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
5. Close supervision is necessary when any appliance is used by or near children.
6. To protect against electrical shock do not immerse cord, plug
or any part of this unit in water or other liquids.
7. Unplug from outlet when not in use, before removing parts and before cleaning.
Allow to cool before putting on or taking o any parts, and before cleaning.
8. DO NOT operate any appliance with a damaged cord or plug, or after the appliance
malfunctions, or if the appliance has been damaged in any manner. Return the
appliance to the nearest repair shop for examination, repair or adjustment.
9. The manufacturer does not recommend the use of accessory attachments other than
what is provided by the manufacturer. Use of attachments may cause injuries.
10. DO NOT use the appliance for other than its intended use.
11. DO NOT use outdoors. FOR HOUSEHOLD USE ONLY.
12. DO NOT place on or near a hot gas or electric burner, or in a heated oven.
13. DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
14. NEVER leave unit unattended while in use or when plugged into an outlet.
15. Extreme caution must be used when moving an appliance containing hot food.
16. Always attach plug to appliance rst, then plug cord in the wall outlet. To
disconnect, turn any control to "o," then remove plug from wall outlet.
ADDITIONAL IMPORTANT SAFEGUARDS
Operating Safety Precautions
1. Ensure the Extractor Head is securely in place before use. Failure to do so may result in injury.
2. Check Extractor Head, for foreign objects before switching to ON position.
3. CAUTION: The Extractor Head rotates at high speeds. Always keep jewelry, long hair, hands
and face a safe distance away from the machine while in use to avoid possible injury.
4. NEVER put ngers on or near the Extractor Head while machine is on or while it is still hot.
5. NEVER overll or use more than the directed amount of sugar in the Extractor
Head. Overlling may cause the sugar to y from the Extractor Head.
6. DO NOT pour water or any other liquid into the Extractor Head.
7. Extractor Head will get hot. Avoid contact until fully cooled.

ENGLISH
4
8. This unit must be on a level surface to operate properly.
Instructions for the Electrical Cord and Plug
1. ELECTRICAL SHOCK HAZARD: Failure to follow these instructions
can result in death, re, or electrical shock.
• Plug into a grounded 3 prong outlet.
• DO NOT remove ground prong.
• DO NOT use an adapter.
2. This unit MUST be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current.
This unit is equipped with a cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
3. WARNING: Improper use of the grounding plug can result in a risk of electric
shock. If the plug does not t fully into the outlet, contact a qualied
electrician. Do not attempt to modify the plug in any way.
4. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
5. Longer detachable power-supply cords or extension cords
may be used if care is exercised in their use.
6. If a longer detachable power-supply cord or extension cord is used:
• The marked electrical rating of the cord set or extension cord should
be at least as great as the electrical rating of the appliance;
• The cord should be arranged so that it will not drape over the countertop or tabletop
where it can be pulled on by children or tripped over unintentionally; and
• The cord set or extension cord should be a grounding-type 3-wire cord.
7. The manufacturer does not recommend using this machine in countries that do not
support 120V AC even if a voltage adapter, transformer, or converter is in use.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
This PROFESSIONAL COTTON CANDY CART by Nostalgia is a perfect way to add a
touch of fun to any party, gathering, or celebration. Simply plug in, turn on, pour pure,
granulated sugar into the center receptacle, and start spinning colorful and tasty treats.
This fanciful product is fun for the whole family and brings out the kid in everyone.
• Works With Hard Candy, Sugar-Free Hard Candy And Flossing Sugar
• Professional Heated Die Cast Extractor Head For Making Carnival Style Cotton Candy
• Serving Shelf Features three 8oz Bowls With Lids And Spoons That Holds
Flossing Sugars And Candies As Well 4 Reusable Plastic Cones
• Full Size 43”Tall With 13”Spoked Wheels With Rubber
Tires And Pull Handle Allows For Easy Mobility
• Cleaning Wire Brush Included

ENGLISH
5
PARTS & ASSEMBLY
HARDWARE
PARTS

ENGLISH
6

ENGLISH
7
ASSEMBLY OF BASE SUPPORT
1. Attach Push Handle (E) from inside Main Unit (A) using supplied #1 Screws.
2. Insert Cross Bar (J) into the square inserts on the inside of Base Support
(I) and secure from below with two #1 Screws. Insert the Leg Assembly
(K) over the protruding ends of the Base Support (I) and fasten from the
inside of Base Support (I) using four #2 Bolts, and four #6 Nut Caps
3. Secure Main Unit (A) to Base Support (I) using four #2 Screws
4. Assemble Base Support (I) into the bottom of the Main Unit
(a) and the secure with four #2 bolts.

ENGLISH
8
(N°7)
Nut
Cap
(F)
Axle
Bolt
(N°6)
Flat
Washers
(F)
Wheel (G)
Base
Support
(N°11)
Flat
Washer
Assembly of Wheels
1. Slide one #4 Flat Washer onto Axle Bolt (F) and insert Axle Bolt (F) into Wheel (G).
2. Put on one #5 Flat Washer. Insert Axle Bolt (F) with Wheel (G) into Base Support (I).
3. Add a second #5 Flat Washer and #6 Nut Cap. Use Wrench (H) to tighten the #6 Nut Cap.
4. Repeat steps to attach second Wheel (G) onto the other side of the Base Support (I).
5. Attach wheel to base using instructions below.