Nostalgia CCP900 Quick guide

All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2016 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 01/14/16 DJ)

CCP900
Vintage Collection™ 1890s 8.0 Oz. Antique Popcorn Cart
Chariot à Maïs Soué Antique Style des Années 1890 Vintage Collection™
Carrito de palomitas antiguo de 1890 de Vintage Collection™
Instructions and Recipes
Consignes et Recettes
Instrucciones y Recetas

ENGLISH
2
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SAFETY
Appliance Specications:
120 Volts, 60 Hz
750 Watts, ETL Approved
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that
can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.

ENGLISH
3
IMPORTANT PRECAUTIONS
1. NEVER immerse in water.
2. NEVER use near water.
3. NEVER use an abrasive sponge nor cloth.
4. NEVER use a scouring pad on the appliance.
5. NEVER leave appliance unattended while in use.
6. NEVER force Kettle in or out of the brackets as this may cause gears to
become misaligned and appliance will not operate properly.
7. Unplug unit from outlet when not in use and during cleaning.
8. DO NOT operate this appliance with a damaged cord or
plug, nor if the appliance ever malfunctions.
9. DO NOT clean any parts of this appliance in a dishwasher.
10. Keep out of reach of children.
11. This appliance is NOT A TOY.
12. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
13. Young children should be supervised while in proximity
of the appliance to ensure their safety.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when using
electrical appliances, including the following:
1. Read all instructions before operating this appliance.
2. Keep door of Main Unit closed while operating. Do not
touch Kettle while operating; it gets very HOT.
3. To protect against electrical shock do not immerse cord, plug or
any part of this appliance in water or other liquids.
4. Close supervision is necessary when any appliance is used near children.
5. Unplug from outlet when not in use, before removing parts and before cleaning.
6. DO NOT operate any appliance with a damaged cord or plug, nor if
the appliance has been damaged in any manner. Return the appliance
to the nearest repair shop for examination or repair.
7. The manufacturer does not recommend the use of accessory
attachments. Use of accessory attachments may cause injuries.
8. DO NOT use outdoors.
9. Position the appliance as close to the outlet as possible
to prevent injury due to tripping over cord.
10. DO NOT leave Kettle motor running once popping has ceased.
11. Extreme caution must be used when moving this appliance.

ENGLISH
4
12. DO NOT use the appliance for other than its intended use.
13. An appliance that is plugged into an outlet should not be left unattended.
14. Check Kettle for presence of foreign objects prior to use.
15. Make sure the Kettle is properly attached to brackets before operating
and that the motor plug is plugged into the Kettle.
16. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
17. Longer detachable power supply cords can be used if care is exercised in their use.
18. The marked electrical rating of an extension cord should be at
least as great as the electrical rating of the appliance.
19. This appliance has a three-prong plug. To reduce the risk of electrical shock, this
plug is intended to t into an outlet only one way. If plug does not t, contact
a qualied electrician. Do not attempt to modify the plug in any way.
20. CAUTION: The lightbulb inside of this unit will get hot. This bulb is
only for use with the popcorn cart. If the bulb gets damaged, it must
be replaced by a qualied person in order to avoid a hazard.
21. Do not attempt to service this appliance yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualied service personnel.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Thank you for purchasing the VINTAGE COLLECTION™ 1890s 8.0 OZ. ANTIQUE
POPCORN CART, a product in Nostalgia's Vintage Series™. This vendor-style popcorn
cart pops up to 32 cups of hot, fresh, kettle cooked popcorn per batch. It features
a large, stainless steel kettle with a built-in stirring system and kernel catcher
to keep unpopped kernels out of each perfect batch. There is a compartment
in the base of the unit to store supplies, making it easy to keep the cart well
stocked and organized, so there's no reason to not keep the party popping!

ENGLISH
5
PARTS & ASSEMBLY
Hardware
Hardware
#1 Screw(8mm)
Qty.8
#2 Screw(3X10mm)
Qty.3
#3 Bolt(16mm)
Qty.4
#5 Flat Washer
Qty.2
PARTS & ASSEMBLY
#4 Bolt(35mm)
Qty.2
#6 Flat Washer
Qty.2
Hardware
#1 Screw(8mm)
Qty.8
#2 Screw(3X10mm)
Qty.3
#3 Bolt(16mm)
Qty.4
#5 Flat Washer
Qty.2
PARTS & ASSEMBLY
#4 Bolt(35mm)
Qty.2
#6 Flat Washer
Qty.2
Hardware
#1 Screw(8mm)
Qty.8
#2 Screw(3X10mm)
Qty.3
#3 Bolt(16mm)
Qty.4
#5 Flat Washer
Qty.2
PARTS & ASSEMBLY
#4 Bolt(35mm)
Qty.2
#6 Flat Washer
Qty.2
#1 Screw (8mm)
Qty. 8
#2 Screw (3mm)
Qty. 3
#3 Bolt (16mm)
Qty. 4
#4 Bolt (35mm)
Qty. 2
#5 Flat Washer
Qty. 2 #6 Flat Washer
Qty. 2

ENGLISH
6
Assembly
(P) Screwdriver

ENGLISH
7
Assembly of Base Support
1. Attach Handle (E) onto the Storage Compartment (C) using four #1 Screws.
2. Insert Front Cross Beam (J) between the Foot Stand (I) and secure with two #4 Bolts.
3. Insert the Rear Cross Beam (K) between the ends of the Foot Stand (I). Attach the
Wheel (G) to the Rear Cross Beam (K) and the Foot Stand (I) with one Axle Bolt (F)
and one #5 Flat Washer on the outside of the wheel, then one #6 Flat Washer and
one Rubber Mat (N). Repeat on the other side with the second Wheel (G).
Axle Bolt (F)
#5 Flat
Washer
#6 Flat
Washer
Rubber
Mat (N)
#4 Bolt
Rear Cross
Beam (K)
Wheel (G)

ENGLISH
8
4. Attach the Bottom Plate (O) to the bottom of the Storage
Compartment (C) and secure with four #3 Bolts.
5. Place the Storage Compartment (C) and Bottom Plate (O) on the Foot Stand (I) and slide
down. Use four #1 Screws to secure the tabs under the Bottom Plate (O) to the Foot Stand (I).
6. Place Main Unit (A) onto the top of the Storage Compartment (C). Ensure that
the two inserting pins at the bottom of the Main Unit (A) line up correctly so that
Main Unit (A) can be locked under the beam of the Storage Compartment (C).
7. Attach Crown (M) to Main Unit (A) using three #2 screws.
#4 Bolt