Nostalgia PT300RETRORED Quick guide

All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2015 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 06/24/15)
2015

PT300RETRORED
'50s-Style Electric Twister & Peeler
Couteau Éplucheur À Torsion Électrique du Style des Années 50
Eléctrico Twister y Peeler en Estilo de 50s
Instructions and Recipes
Consignes et Recettes
Instrucciones y Recetas

ENGLISH
2
Make everyday a party!
Visit www.nostalgiaproducts.com for more fun products.
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SAFETY
Appliance Specications:
120 Volts, 60 Hertz
15 Watts, ETL Approved
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that
can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential
hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

ENGLISH
3
IMPORTANT PRECAUTIONS
1. NEVER immerse Motor or plug in water.
2. NEVER use near water.
3. NEVER use an abrasive sponge or cloth on the appliance.
4. NEVER use a scouring pad on the appliance.
5. NEVER leave appliance unattended while in use.
6. Unplug unit from outlet when not in use, before placing
or removing parts and during cleaning.
7. DO NOT operate this appliance with a damaged cord or
plug, nor if the appliance ever malfunctions.
8. DO NOT put in a dishwasher.
9. Blades are EXTREMELY SHARP. Use EXTREME CAUTION when operating this appliance.
10. Keep out of reach of children.
11. This appliance is NOT A TOY.
12. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
13. Young children should be supervised while in proximity of the
appliance to ensure that they do not play with it.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when using
electrical appliances, including the following:
1. Read all instructions before operating this appliance.
2. Keep hands away from blade mechanism.
3. DO NOT touch moving parts.
4. To protect against electrical shock do not immerse cord,
plug or Motor in water or other liquids.
5. Close supervision is necessary when any appliance is used near children.
6. Unplug from outlet when not in use, before removing parts and before cleaning.
7. DO NOT operate any appliance with a damaged cord or plug, nor if
the appliance has been damaged in any manner. Return the appliance
to the nearest repair shop for examination or repair.
8. The manufacturer does not recommend the use of accessory
attachments. Use of accessory attachments may cause injuries.
9. DO NOT use outdoors.
10. Position the appliance as close to the outlet as possible
to prevent injury due to tripping over cord.
11. DO NOT place on or near a hot gas or electric burner, nor in a heated oven.

ENGLISH
4
12. Check appliance for presence of foreign objects prior to use.
13. DO NOT use the appliance for other than its intended use.
14. DO NOT place ngers or utensils into feed or discharge areas.
15. DO NOT press the Drive / Twist button when appliance is not ready to be used.
16. An appliance that is plugged into an outlet should not be left unattended while in operation.
17. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
18. Longer detachable power supply cords can be used if care is exercised in their use.
19. The marked electrical rating of an extension cord should be at
least as great as the electrical rating of the appliance.
20. This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug is intended to t into a polarized outlet only one way.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Thank you for purchasing the '50S-STYLE ELECTRIC TWISTER & PEELER from Nostalgia™!
Now you can easily enjoy a multitude of peeled, spiraled and shredded snacks the whole
family will enjoy. The '50S-STYLE ELECTRIC TWISTER & PEELER's included cutting blades
work great on a variety of vegetables and fruit, so you can enjoy potatoes, apples, zucchini,
and more. Have fun, get creative, and enjoy your '50S-STYLE ELECTRIC TWISTER & PEELER!
Includes:
• Spiral Blade, Small Shredded Blade & Medium Shredded Blade
for perfectly peeled, spiraled and shredded potatoes
• Convenient storage compartment for Cord, Spiral Blade, Small Shredded
Blade, Medium Shredded Blade, Peel Fork & Cut Fork
• 10 bamboo skewers

ENGLISH
5
PARTS & ASSEMBLY
PARTS
Power Button
Drive/ON Twist/OFF
ASSEMBLY
Your '50S-STYLE ELECTRIC TWISTER & PEELER comes fully assembled when removed from
the box. The Spiral Blade, Small Shredded Blade, Medium Shredded Blade, Cut Fork, and Peel
Fork will be the only loose parts included, and can be found the Storage Compartment.
Prepare for rst use by thoroughly washing the Spiral Blade, Small Shredded
Blade, Medium Shredded Blade, Cut Fork, and Peel Fork in warm, sudsy water
and dry thoroughly. USE EXTREME CAUTION when handling the Blades
as they are very sharp and may cause injury if used improperly. DO NOT
submerge the Base in water. To clean the Base when needed, use a damp cloth
to wipe the exterior, and then dry o with a clean, non-abrasive towel.
Motor
Housing
Power Button
Storage
Compartment
Spiral Blade Small
Shredded
Blade
Medium
Shredded
Blade
Peeling Blade
Peeling Arm
Peel Fork
Cut Fork
Clutch Release
Blade
Mount
Peeling Arm Release
Base
Fork Mount

ENGLISH
6
HOW TO OPERATE
Now that you have cleaned and reassembled your '50S-STYLE ELECTRIC
TWISTER & PEELER, peeling, spiraling and shredding is both easy and fun!
NOTE: Using the correct Cut Fork/Peel Fork and Blade is extremely
important. Incorrect use may damage the appliance.
SHRED
1. To prepare '50S-STYLE ELECTRIC TWISTER & PEELER, hold down Clutch Release
button and move Peeling Arm to end furthest from Fork Mount. Be sure Peeling
Arm Release is in the down position. NOTE: If you want to simultaneously
peel and shred, be sure Peeling Arm Release is in the up position.
2. Attach Cut Fork to Fork Mount by aligning notches on Cut Fork to grooves
on Fork Mount, then twisting the Cut Fork clockwise to secure.
3. Follow section on "ATTACHING BLADES TO BLADE MOUNT" on page 8 to attach
Small Shredded Blade or Medium Shredded Blade to Blade Mount.
4. Press end of potato into center of Cut Fork.
5. When ready to peel, slide the Power Button to Drive/ON and
the Shredded Blade will begin to shred your potato.
6. When done shredding, slide the Power Button to Twist/OFF.
7. Carefully remove remaining potato from '50S-STYLE ELECTRIC TWISTER & PEELER.
8. Repeat steps 1-8 to shred additional potatoes.
9. When done using the '50S-STYLE ELECTRIC TWISTER & PEELER, detach the Cut Fork by
twisting counter-clockwise and pulling away from the Fork Mount.
PEEL
1. To prepare '50S-STYLE ELECTRIC TWISTER & PEELER, hold down Clutch
Release button to slide Peeling Arm to end furthest from Fork Mount.
2. Carefully push end of potato into points of Peel Fork, making sure it is centered.
Next, attach Peel Fork to Fork Mount by aligning notches on Peel Fork to
grooves on Fork Mount. Twist Peel Fork clockwise to secure into place.
3. Move the metal Peeling Arm Release to the up position
so that the Peeling Arm can move freely.
4. When ready to peel, slide the Power Button to Drive/ON and
the Peeling Arm will begin peeling the potato.
5. When done peeling, slide the Power Button to Twist/OFF.
6. Return the Peeling Arm to its starting position and carefully remove the Peel Fork
and peeled potato from the Fork Mount. Slide potato o points of Peel Fork.
7. Repeat steps 1-5 to peel additional potatoes.
8. When done using the '50S-STYLE ELECTRIC TWISTER & PEELER, detach the Peel
Fork by twisting counter-clockwise and pulling away from the Fork Mount.
Peeling Arm Release

ENGLISH
7
SPIRAL
1. To prepare '50S-STYLE ELECTRIC TWISTER & PEELER, hold down Clutch
Release button and move Peeling Arm to end furthest from Fork
Mount. Be sure Peeling Arm Release is in the down position.
2. Attach Cut Fork to Fork Mount by aligning notches on Cut Fork to grooves
on Fork Mount, then twisting the Cut Fork clockwise to secure.
3. Follow section on "ATTACHING BLADES TO BLADE MOUNT"
on page 8 to attach Spiral Blade to Blade Mount.
4. Press end of potato into center of Cut Fork.
5. When ready to peel, slide the Power Button to Drive/ON and
the Spiral Blade will begin to spiral cut your potato.
6. When done spiral cutting, slide the Power Button to Twist/OFF.
7. Carefully remove remaining potato from Cut Fork and the spiraled
potato from '50S-STYLE ELECTRIC TWISTER & PEELER.
8. Repeat steps 1-8 to spiral additional potatoes.
9. When done using the '50S-STYLE ELECTRIC TWISTER & PEELER, detach the Cut
Fork by twisting counter-clockwise and pulling away from the Fork Mount.
SPIRAL ON A STICK
1. To prepare '50S-STYLE ELECTRIC TWISTER & PEELER, hold down Clutch Release
button and move Peeling Arm to end furthest from Fork Mount. Be sure Peeling
Arm Release is in the down position.
2. Attach Cut Fork to Fork Mount by aligning notches
on Cut Fork to grooves on Fork Mount, then
twisting the Cut Fork clockwise to secure.
3. Follow section on "ATTACHING BLADES TO BLADE MOUNT"
on page 8 to attach Spiral Blade to Blade Mount.
4. Next, carefully pierce center of potato, lengthwise, with
pointed end of Bamboo Skewer. Stop when pointed
end of Bamboo Skewer reaches end of the potato.
5. Thread visible end of Bamboo Skewer through hole near top of Spiral Blade and notch
cutout on top of end panel. Center and press end of potato into center of Cut Fork.
6. When ready to peel, slide the Power Button to Drive/ON and
the Spiral Blade will begin to spiral cut your potato.
7. When done spiral cutting, slide the Power Button to Twist/OFF.
8. Carefully remove potato from '50S-STYLE ELECTRIC TWISTER & PEELER
and evenly fan out potato spirals on Bamboo Skewer.
9. Repeat steps 1-8 to spiral additional potatoes.
10. When done using the '50S-STYLE ELECTRIC TWISTER & PEELER, detach the Cut Fork by
twisting counter-clockwise and pulling away from the Fork Mount.
When nished using '50S-STYLE ELECTRIC TWISTER & PEELER, follow section on "REMOVING
BLADES FROM BLADE MOUNT" on page 8 to remove Blades from Blade Mount.

ENGLISH
8
ATTACHING BLADES TO BLADE MOUNT
USE EXTREME CAUTION when handling all Blades! They are
extremely sharp and may cause injury if used improperly.
4. When secured, Blade will click and stand
vertical.
3. Simultaneously push top of Blade back
while pushing bottom of Blade towards
Fork Mount to snap into place. Some
may nd it easiest to secure using two
hands on either side of the Blade.
1. Take note of the notches on the Blade
Mount. Make sure the Peeling Arm
Release is in the down position.
2. Angle and slide chosen Blade between
the two notches on the arm of the Blade
Mount as shown below.
REMOVING BLADES FROM BLADE MOUNT
1. Simultaneously push bottom of Blade back
while pushing top of Blade towards Fork
Mount to remove. Blade will click upon
removal.
NOTE: Once attached, Blade is dicult
to remove. Removing Blade requires
more pressure than attaching. Some
may nd it easiest to remove using two
hands on either side of the Blade.