NovaStar VX4S User manual

www.novastar.tech
1
①: Power switch .
②: Operation screen
③: Knob . To press knob means Enter or OK, rotating knob represents selection
or adjustment.
④: ESC . Escape current operation or selection.
1. After starting the controller, the main interface of the Operation screen is
as follows:
2. Press the Knob to enter the Main Menu.
3. Rotate the Knob to select Screen Settings and then press the Knob to
enter the Submenu of Screen Settings .

www.novastar.tech
2
4. Press the Knob to enter the Cabinet Row Qty setting.
5. Rotate the Knob to input the cabinet quantity of a row of your LED screen
according to the field reality.
6. Press the Knob again to save the Cabinet Row Qty setting.
7. Rotate the Knob to move to next Submenu setting one by one. Then
repeat Step4 to Step6 to finish the Cabinet Column Qty & Port1 Cabinet
Qty setting similarly.
If the number of ports with loads is n (n≤4), the first n-1 ports must load
the same number of cabinets, which must also be an integral multiple of
the number of cabinet rows or columns and be greater than or equal to
the number of cabinets for the nth port.

www.novastar.tech
3
8. For the Data Flow setting (Front View). Press the Knob to enter the Data
Flow layout selection, you can rotate the Knob to see the effects of
different data flow on the screen in real time. If you are satisfied with the
effect of current data flow, you must press the Knob to save the setting.
The real cabinet connection of each port must follow the same one of the
eight preset data flow layout. You must ensure that Port 1 is the start
position of the whole data flow connection.
9. Press the ESC to return to the main interface.