Novatel MiFi 2 User manual

MiFi®2
Quick Start Guide

gettingstarted
GETTING TO KNOW YOUR MiFi® 2 INTELLIGENT MOBILE HOTSPOT
With MiFi 2 by Novatel Wireless you can connect laptops, tablets, eReaders, gaming consoles
and more – up to 10 devices – to fast 4G LTE internet anywhere, anytime.
For complete information about your device, accessories, and safety and regulatory information, see the User Guide at
www.novatelwireless.com.
* microSD card sold separately.
battery door
reset button
microSD™ card slot*
SIM card slot
power button
interactive icons
status bar
micro USB port
sleep screen indicator
touchscreen

devicesetup
INSERT BATTERY AND POWER ON
Lift battery door to open the battery compartment and insert the battery. Insert SIM card in
the SIM card slot if not already installed. Replace battery door to secure battery in place.
To power the MiFi 2 on or off, or to lock the touchscreen:
• Press and release the power button. Your MiFi 2 is ready to use when the touchscreen
displays the interactive icons.
• To lock the touchscreen, press and release the power button. To unlock, press and release
the power button and slide the lock tab.
• To power off the device, press and hold the power button for 3 seconds to display the Shut
Down window, then tap Yes.
power on lock/unlock power off

MiFi 2 connect
CONNECT UP TO 10 Wi-Fi ENABLED DEVICES
To connect wireless devices:
1. Open the Wi-Fi menu on the device you would like to connect and view the list of
available networks.
2. Select your MiFi 2 Wi-Fi Network Name (SSID) (e.g., MIFI2-XXXX).
3. Select Connect and enter the Wi-Fi password displayed under Connection Info.
4. To connect to a laptop using a USB cable, select Settings > USB Mode > Tethering over USB
Charge Only (no data use),
select .
Wi-Fi network name/password tethering over USB charge only over USB

webinterface
MiFi 2 WEB INTERFACE
You can customize settings, change your password, get information and access applications
using the MiFi 2 Web Interface.
• Browse to http://my.mifi on any connected device to access features and settings.
• The default Web Interface Password is admin. Select Settings > Device Settings > Web
Interface Password to change the password.
MiFi 2 Home
navigation panel
quick links menu
access file sharing
status bar
share GPS information
access MiFi Media Center

datausage
CHECK YOUR DATA USAGE
You can check your usage alert level and monitor data used directly on the MiFi 2 touchscreen
or from the MiFi 2 Web Interface page.
• On the MiFi 2 tap the Data Usage icon. You can set your usage alert level and cycle start, and
view data used, days remaining in your cycle, and more.
• On the MiFi 2 Web Interface, select the Data Usage tab on the Navigation panel at
http://my.mi/datausage. Enter your Web Interface Password (default is admin) to view your
data usage details.
data usage icon data usage touchscreen data usage web interface

touchscreenicons
SWIPE THE SCREEN TO SEE ALL ICONS. TAP TO SEE HELPFUL INFORMATION.
Connection Info displays the MiFi 2 Wi-Fi Network Name and Wi-Fi Password.
Connected Devices displays details on devices connected to or blocked from your MiFi 2.
Data Usage enables you to check your data plan summary, data used, remaining days in
your billing cycle, and more.
Settings allows you to access and configure your MiFi 2 device settings.
MiFi Media Center provides access to movies, music and photos stored on your microSD
card from connected devices.
Messages connects you to text messages from your service provider delivered to your
MiFi 2.
File Sharing allows you to upload and download files stored on your microSD card from
compatible connected devices.
GPS enables you to share location information with connected devices.
Wi-Fi Protected Setup allows you to connect WPS-enabled devices to MiFi 2 without using
a keyboard.
Customer Support displays your wireless number and device model.
About provides access to current status, device information, and software updates.
PN 90026775 R1

connecteddevices
MANAGE CONNECTED DEVICES
To view currently connected or blocked devices:
1. On your MiFi 2 touchscreen, tap the Connected Devices icon. Devices currently connected
to your MiFi 2 are listed first, followed by any blocked devices.
2. To display details about a connected or blocked device, tap the arrow to the right of the
device.
3. To block a device, tap Block.
4. To remove the block on a device, tap Unblock.
connected devices icon list connected devices block device

sharefiles
SHARING FILES WITH CONNECTED DEVICES
The MiFi 2 includes a microSD card slot that enables you to store files on a microSD card and
access them on laptops, tablets and other connected devices.
1. On the back of your MiFi 2, pull out the microSD door and insert a card.
2. Tap the File Sharing icon on the touchscreen. Slide the file sharing button to ON.
3. On your computer, the files on the microSD card display as a network drive or shared
folder. Other connected devices can view the files using a web browser at http://my.mi/
lesharing.
• On the Mac, the microSD card appears under the Shared menu in the Finder.
• On the PC, the microSD card appears in the Networks section of the computer.
enable file sharing Windows file sharing Mac file sharing

sharemedia
SHARING MOVIES, MUSIC, AND PHOTOS
You can place movies, music and photos on a microSD card inserted in the MiFi 2 – up to
32GB. Play them on connected devices using a web browser or on DLNA capable TVs or
players.
1. On your MiFi 2 touchscreen, tap the MiFi Media Center icon.
2. Slide the Enable Media Center button to ON.
3. From your connected computer or mobile device with browser capabilities, browse to
http://my.mi/mediacenter to start streaming.
4. From a DLNA compatible player, use the player’s DLNA interface to select MiFi 2.
enable MiFi Media Center using your web browser using a DLNA device

regulatoryinfo
FEDERAL COMMUNICATIONS COMMISSION NOTICE (FCC ) AND INDUSTRY CANADA (IC)
FCC and IC rules and regulations
Electronic devices, including computers and wireless modems, generate RF energy incidental to their intended
function and are therefore subject to FCC rules and regulations.
This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential environment.
This equipment generates radio frequency energy and is designed for use in accordance with the manufacturer’s user
manual. However, there is no guarantee that interference will not occur in any particular installation. If this equipment
causes harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules and Industry Canada
ICES-003 for EMI compliance. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF.
SUCH ACTION MAY VOID THE WARRANTY. THE MiFi 5792 MODEM IS FACTORY TUNED. NO CUSTOMER
CALIBRATION OR TUNING IS REQUIRED. CONTACT NOVATEL WIRELESS TECHNICAL SUPPORT FOR

FCC CAUTION: Any changes or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
MODIFICATIONS: The FCC requires that you be notified that any changes or modifications made to this device that
are not expressly approved by Novatel Wireless, Inc. may void your authority to operate the equipment.
NOTE: The Radio Frequency (RF) emitter installed in your modem must not be located or operated
in conjunction with any other antenna or transmitter, unless specifically authorized by Novatel Wireless
Technologies.
RF EXPOSURE CONTENT
FCC EQUIPMENT AUTHORIZATION ID: PKRNVWMIFI5792
This device is authorized for use in mobile and portable applications. At least 10 mm (0.4 inches) of separation between
the MiFi device and the user’s body must be maintained at all times.
This product has been evaluated for SAR and meets the FCC Guidelines for exposure to radio waves.
IC number: 3229A-MiFi5792
© 2013 Novatel Wireless. MiFi, the MiFi logo, Novatel Wireless and the Novatel Wireless logo are trademarks or
registered trademarks of Novatel Wireless, Inc. DLNA is a trademark of the Digital Living Network Alliance. microSD is
a trademark of SanDisk. All other marks contained herein are the property of their respective owners.
Printed using non-petroleum based inks and coatings.

MiFi®2
Guide de démarrage rapide

pour démarrer
APPRENDRE À CONNAÎTRE VOTRE POINT D'ACCÈS SANS FIL INTELLIGENT MiFiMD
Consultez le manuel d'utilisation au www.novatelwireless.com pour en savoir plus au sujet de votre appareil, de vos accessoires,
de la sécurité et des renseignements légaux.
*Carte microSD vendue séparément.
couvercle de la pile
bouton de mise en marche
icônes interactives
barre d'état indicateur de l'écran de veille
écran tactile
bouton de réinitialisation
fente de la carte microSDMC*

configuration de l'appareil
INSÉRER LA PILE ET MISE EN MARCHE
Soulevez le couvercle de la pile pour ouvrir le compartiment et insérez la pile. Insérez la carte
SIM dans la fente SIM si pas déjà installée et replacez la pile. Replacez le couvercle de la pile
pour maintenir la pile en place.
•
lorsque l'écran tactile affiche les icônes interactives.
• Pour verrouiller l'écran tactile, appuyez sur le bouton de mise en marche et relâchez-le.
Pour déverrouiller, appuyez sur le bouton de mise en marche et relâchez-le, puis faites
glisser la barre de verrouillage.
• Pour éteindre l'appareil, appuyez sur le bouton de mise en marche pendant trois secondes
pour afficher la fenêtre de mise à l'arrêt, puis appuyez sur Oui.
mise en marche verrouiller/déverrouiller mise à l’arrêt

connexion
Pour connecter des appareils sans fil:
1.
des réseaux accessibles.
2.
3. Sélectionnez Connexion, puis saisissez le mot de passe Wi-Fi affiché sous Info de connexion.
4.
Modem attaché par USB
mode charger seulement (pas d'utilisation de données), sélectionnez
.
modem attaché par USB charger seulement par USB

interface Web
Vous pouvez personnaliser les paramètres, modifier votre mot de passe, obtenir de
• Consultez le http://my.mifi sur tout appareil connecté pour accéder aux fonctionnalités et
aux paramètres.
• admin. Sélectionnez
pour modifier le mot de
passe.
panneau de navigation
menu des liens rapides
accéder au partage
de fichiers
barre d'état
accéder au centre

utilisation des données
CONSULTER L'UTILISATION DES DONNÉES
Vous pouvez consulter votre niveau d'alerte concernant l'utilisation et surveiller les données
• Utilisation des données. Vous pouvez établir votre niveau
d'alerte d'utilisation et le début du cycle, et consulter les données utilisées, le nombre de
jours restants à votre cycle et plus.
• Utilisation des données du panneau
de navigation à l'adresse http://my.mi/datausage. Saisissez le mot de passe de votre
admin) pour voir les détails de l'utilisation des données.
icône de l’utilisation
des données
écran tactile de l’utilisation
des données des données

icônes de l'écran tactile
FAITES GLISSER L'ÉCRAN POUR VOIR TOUTES LES ICÔNES. APPUYEZ SUR POUR
CONSULTER DE L'INFORMATION UTILE.
Info de connexion
Appareils connectés
Utilisation des données vous permet de consulter le sommaire de votre forfait de données,
les données utilisées, le nombre de jours restants à votre cycle de facturation et plus.
Réglages
Centre multimédia MiFi vous permet d’accéder à des films, à de la musique et à des photos
stockés sur votre carte microSD à partir d’appareils connectés.
Messages vous donne accès aux messages texte envoyés par votre fournisseur de service
Partage de chiers vous permet de téléverser et de télécharger les fichiers stockés sur votre
carte microSD à partir des appareils compatibles qui sont connectés.
GPS vous permet de partager de l'information sur votre emplacement avec les appareils
connectés.
Wi-Fi Protected Setup
de clavier.
Service à la clientèle affiche votre numéro sans fil et le modèle de votre appareil.
À propos affiche l'état actuel, l’information de l'appareil et les mises à jour logicielles.
PN 90026775
R1

appareils connectés
GÉRER LES APPAREILS CONNECTÉS
Pour voir les appareils actuellement connectés ou bloqués:
1. Appareils connectés. Les appareils
bloqués.
2. Pour afficher les détails d'un appareil connecté ou bloqué, appuyez sur la flèche située à
droite de l'appareil.
3. Pour bloquer un appareil, appuyez sur Bloquer.
4. Pour débloquer un appareil, appuyez sur Débloquer.
icône des appareils connectés lister les appareils connectés bloquer l’appareil