Novatel MIFI MiFi 2200 Specification sheet

Mobile Broadband / NationalAccess


MiFi™ 2200 – Intelligent Mobile
Hotspot
Product user guide
1

Welcome
Congratulations on purchasing the Novatel Wireless M
for Mobile Broadband and Wi-Fi!
efore installing the MiFi 2200, VZAccess Manager software and drivers, review this
anual, which outlines the features and functions of the MiFi 2200 hardware.
This device operates over the high-speed Mobile Broadband and NationalAccess networks
in the 800/1900 bands and Wi-Fi enabling you to connect multiple devices at high speeds
to the Internet, your corporate Intranet, Wi-Fi-enabled devices and email virtually
anywhere!

TheMiFi2200Package
The Verizon Wireless MiFi 2200 package includes:
- Verizon Wireless MiFi 2200
- AC Wall Charger
- Lithium Ion Battery
- Storage Pouch
- microUSB Cable
- Quick Reference Guide
CustomerService
For Customer Service while in the U.S. or Canada, dial 1-800-922-0204.

iFi 2200 Intelligent Mobile Hotspot
B
m
2

Wireless communications
IMPORTANT Notice
Due to the transmission and reception properties of wireless communications, data can
th
Although
veral
tors including signal reflection, the ionosphere, and interference from other
dio channels.
ll not be held responsible for damages of any kind
in data transmitted or received with the MiFi 2200
ceive such data.
2200 device in an environment that may be susceptible to radio
g in danger specifically;
by the law
oFollow any special rules and regulations and obey all signs and notices. Always
st device and remove the modem from the USB port when
o so, or when you suspect that it may cause interference or
Where explosive atmospheres may be present
oDo not operate the MiFi 2200 in any area where a potentially explosive
atmosphere may exist. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Be aware and comply with all signs and
instructions.
oUsers are advised not to operate the MiFi 2200 while at a refueling point or
service station. Users are reminded to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution areas), chemical plants
or where blasting operations are in progress.
oAreas with a potentially explosive atmosphere are often but not always clearly
marked. Potential locations can include gas stations, below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air contains chemicals or particles,
such as grain, dust or metal powders, and any other area where you would
normally be advised to turn off your vehicle engine.
occasionally be lost or delayed. This can be due to the variation in radio signal streng
that results from changes in the characteristics of the radio transmission path.
data loss is rare, the environment where you operate the MiFi 2200 may adversely affect
communications.
ariations in radio signal strength are referred to as fading. Fading is caused by se
ifferent fac
V
d
ra
Verizon Wireless or its partners wi
resulting from the delays or errors
device, or failure of the MiFi 2200 device to transmit or re
Safetyhazards
Do not operate the MiFi
interference resultin
Areas where prohibited
turn off the ho
instructed to d
danger.
3

Near Medical and life support equipment
y area where medical equipment, life
support equipment, or near any equipment that may be susceptible to any
ference. In such areas, the host communications device must
s
d wireless operations before boarding an airplane. Please ensure that
can transmit signals that could interfere with various onboard systems
and controls.
less data device
while in control of a vehicle. Doing so will detract from the driver or operator's
operation of that vehicle. In some countries, operating such
ations devices while in control of a vehicle is an offense.
The informat is subject to change without notice and
should n
Copyrigh
©20
Patents
Licensed by
4,901,30
5,506,86
5,267,261
5,600,754
5,710,784 5,778,3
oDo not operate the MiFi 2200 in an
form of radio inter
be turned off. The MiFi 2200 may transmit signals that could interfere with thi
equipment.
On an aircraft, either on the ground or airborne
oIn addition to FAA requirements, many airline regulations state that you must
suspen
the host device is turned off and the MiFi 2200 is removed from the USB port
prior to boarding aircraft in order to comply with these regulations. The MiFi
2200
While operating a vehicle
oThe driver or operator of any vehicle should not operate a wire
control and
communic
Limitationofliability
ion contained in this document
ot be construed as a commitment by Verizon Wireless Inc.
t
09 Verizon Wireless, Inc.
andlicenses
QUALCOMM Incorporated under one or more of the following Patents:
7 5,490,165 5,056,109 5,504,773 5,101,501
5 5,109,390 5,511,073 5,228,054 5,535,239
5,544,196 5,267,262 5,568,483 5,337,338
5,414,796 5,657,420 5,416,797 5,659,569
38
4

Softwa
Proprietary
The softwa
Verizon Wir rs. And although copyrighted, the software drivers are
unp rietary to Verizon Wireless and/or
Verizon Wir
of the so
copying of
strictly proh
access to th
internal da
U.S. Go Clause:
The soft
U.S. Govern
Documenta
U.S. Govern
ort, license or otherwise transfer the software drivers or
y where such transfer is prohibited by the United States
y

re Drivers License
Rights Provisions:
re drivers provided with this product are copyrighted by Verizon Wireless and/or
eless’ supplie
ublished and embody valuable trade secrets prop
eless’ suppliers. The disassembly, decompilation, and/or Reverse Engineering
ftware drivers for any purpose is strictly prohibited by international law. The
the software drivers, except for a reasonable number of back-up copies is
ibited by international law. It is forbidden by international law to provide
e software drivers to any person for any purpose other than processing the
ta for the intended use of the software drivers.
vernment Restricted Rights
ware drivers are classified as "Commercial Computing device Software" and the
ment is acquiring only "Restricted Rights" in the software drivers and their
tion.
ment Export Administration Act Compliance Clause:
It is forbidden by US law to exp
Derivative Works to any countr
Export Administration Act, or any successor legislation, or in violation of the laws of an
other country.
5

MiFi 2200 Wireless Modem Hardware: Overview
Thank you for choosing the Verizon Wireless MiFi 2200 Intelligent
Mobile Hotspot by Novatel Wireless with Mobile Broadband and Wi-Fi!
MiFi 2200 is an Intelligent Mobile Hotspot, empowering you with high-speed data access
on the Verizon Wireless Mobile Broadband wireless data network and Wi-Fi connectivi
With the MiFi 2200, you can:
•Connect to High Speed Wireless Data (Mobile Br
ty.
oadband)
d
a computer or most Wi-Fi compatible devices.
ect at one time, such
,
•Experience NovaSpeed™ Technology
NovaSpeed, the latest software technology from Novatel Wireless, enhances
performance with streaming video, online gaming, simultaneous uploads and
downloads, and large file transfers with minimal interruptions or buffering.
•Manage Wireless Network Activity – VZAccess Manager and MiFi Settings
Includes VZAccess Manager software for automatic installation without a CD and
easy navigation. The web-based MiFi Settings is for device status and activation via
USB and Wi-Fi.
1. VZAccess Manager: A powerful application tool designed to make piloting your
remote office a breeze. VZAccess Manager allows you to manage, monitor, and
customize your wireless network activity through an easy-to-use interface.
NOTE: VZAccess Manager is required for activation and firmware/PRL updates.
2. MiFi Settings: Allows you to manage, monitor, and customize your Wi-Fi and Mobile
Broadband connection through an easy-to-use interface when the device is in Wi-Fi
mode (i.e. without the use of the USB cable).
•Benefit from Wi-Fi Connectivity
With the MiFi 2200 Intelligent Mobile Hotspot, connect via Wi-Fi and access Mobile
Broadband to browse the Internet, access email, run businesses applications an
more from
The MiFi 2200 enables multiple Wi-Fi enabled devices to conn
as notebooks, desktops, tablet computers, personal digital assistants, CE devices
and most Wi-Fi enabled consumer devices.
Typical battery usage time is 4 hours active and 40 hours standby in Wi-Fi mode* (*for one Wi-Fi client)
6

•Choose between Two Operating Modes:
ble.
USB Cable mode supports Windows Vista, XP, 2000; Mac OS X 10.4 or higher.
•Advanced embedded antenna design for Mobile Broadband and Wi-Fi
•aging Service (SMS) (Mobile Broadband only)
n
Mobile Broadband with USB Cable or Wi-Fi
The MiFi 2200 package includes a battery for operation via Wi-Fi and a USB ca
*See System Requirements for a complete list of operating system support.
Additional features include
•VPN capability
•Auto installation and connectivity options
2-Way Short Mess
•NDIS configuratio
7

Abou leHotspot
Your M
tYourMiFi2200IntelligentMobi
iFi 2200 has the following parts:
1. Power Button: Indicates power, battery, and roaming activity. Please see the following
page for an explanation of the Power button LED states. (See also page 9 for Power
Button LED description)
2. microUSB Connector: Connects to computing devices equipped with a Type A USB
port.
3. Service Status Indicator (LED): Visual service status LED indicator that shows you
service and data modes. Please see the following page for an explanation of these
Service Status LED states. (See also page 9 for Service Status Indicator LED description)
CareofYourMiFi2200WirelessModem
As with any electronic device, the MiFi 2200 must be handled with care to ensure
reliable operation. Verizon Wireless recommends the following handling guidelines:
•Do not apply adhesive labels to the MiFi 2200; they may cause the device to
potentially overheat and they may alter the performance of the antenna system.
•The USB connector should plug easily into your computer’s Type A USB port.
Forcing the device into a port may damage the connector.
•Protect the MiFi 2200 from liquids, dust, and excessive heat.
•Store the MiFi 2200 in a safe place, when not in use.
8

LEDStates
Service Status Indicator (LED)
The MiFi 2200 is designed with a status light that simply indicates what the connection
status is.
LED Color Meaning
LED not lit No Power to Modem
LED GREEN - Solid Modem is powered but not transmitting
or receiving
LED GREEN – slow blinking Modem is powered on but there is no
service
LED GREEN – intermittent blinking Modem transmitting/receiving data;
blinking rate proportional to data speed
Power Button (LED)
the
dev
The MiFi 2200 is designed with a power button that lights up to indicate whether or not
ice is powered on and what the charging status is.
LED Color Meaning
LED not lit No Power to Modem
LED BLUE – Solid Modem is Powered on and Roaming
LED GREEN - Solid Modem is powered on and fully charged
LED GREEN – glowing Modem is in hibernate
LED RED - blinking Modem Battery is Critically Low.
LED AMBER - solid Modem Battery is Charging
LED AMBER - blinking Modem Error, see Troubleshooting
9

AbouttheVZAccessManagerSoftwareandtheMiFiSettings
Ways
obile Broadband/NationalAccess
Now you can get the broadband-like speed you require to work efficiently outside the
home can connect to the Internet, corp l and
download th average download speeds
Broadb reedom to stay productive
road or in a meeting across town. You also receive N sservice when outside
the Mo erage Area. Nat
of cities and towns and allows download speeds of 6 s and burst up to 144 Kbps.
Rev. A capable data devices
•Download: typical download speeds of 600 kbps - 1.4 Mbps.
•Upload: typical upload speeds of 500-800 kbps.
Rev.
peak speeds burst to 144 kbps.
Subject to C ment, Calling Plan, credit approval & other service terms.
Mobile Br d claim based on our network tests with 5 MB sion. Verizon Wireless is
rapidly adding Rev. A capability to your Mobile Broadband service area. Your Mobile Broadband Rev. A-enabled device will indicate
coverage when you are in a Mobile Broadband Rev. A service area. When outside the Rev. A service area, your wireless device will
revert to M ical download speeds will be 400–700
National re available. Actual throughput speed
when roaming.
NationalAccess Rev.0 speed claim based on our network test with 101 KB FTP data files, without compression. Actual throughout
speed and ot applicable when roaming.
Wi-Fi 802.11b/g
802.11b uses the 2.4GHz frequency spectrum with a bandwidth of 11Mbps.
802.11g (2.

toAccess
The MiFi 2200 supports Mobile Broadband and Wi-Fi service for a superior wireless data
connection.
M
or office. You orate intranet, check your emai
attachments wi
and gives you the f
of 400 - 700 Kbps. Mobile
and connected whether you're on the
ationalAcces
bile Broadband Rate and Cov ionalAccess is available in thousands
0-80 Kbp
0 capable data devices
•Download: typical download speeds of 400-700 kbps with a maximum download
speeds burst to 2Mbps.
•Upload: typical upload speeds of 60-80 kbps with
ustomer Agree
oadband Rev.A spee FTP data files without compres
obile Broadband Rev. 0 (typ
Access coverage areas, whe
Kbps and upload speeds will be 60–80 Kbps) or
and coverage may vary. Speed claims not applicable
coverage may vary. Speed claim n
4Ghz, 54Mbps).
10

Getting Started
In order to get started with your new device, you will need to follow a few simple steps:
irm that your computer meets the minimum system requirements
to USB and activate the MiFi 2200 (**Battery must be inserted to use MiFi via USB)
ents
1. Review and conf
2. Insert and charge the battery
3. Plug in
TheMiFi2200SystemRequirem
To install and use the MiFi 2200, your host computer must meet these requirements:
Operating System
* IN USB MODEM MODE with
USB Cable ONLY
Windows® Vista, XP (SP2 or higher), 2000
NOTE: Windows XP SP1, Windows 2000 SP3 and
SP4 require specific OS patches. For
details please go to www.vzam.net.
-OR -
Mac® OS X 10.4 or higher
Software Internet browser software (i.e.
irefox, AOL)
Internet Explorer,
Netscape, Safari, F
M eod m Software Mobile Broadband/USB Cable Mode: VZAccess
Manager included on the device, no CD required.
Wi-Fi Mode: MiFi Settings
CPU 166 MHz or higher
Interface One Type-A USB port and/or802.11 b/g
Memory (RAM) 128 MB
Hard Disk Space 100 MB

11

How to Use Your MiFi 2200
This chapter provides information and instructions for setting up the MiFi 2200 for the first
tim Wi-Fi,
which are detailed in this section.
The Quick R
and e
e. There are two power modes of use with the MiFi 2200, Mobile Broadband and
eference Guide that was included in the box when you purchased your product
th VZAccess Manager Software User Guide details the installation and configuration
of the MiFi 2200 with the VZAccess Software.
Follow these steps to begin using the MiFi 2200:
IMPORTANT: Before using the MiFi 2200 y and
c
PowerManagement
There are three power modes in w
- Battery
- AC Wall Charger
-
Battery: In this mode, the MiFi 2200 le battery.
AC Wall Charger: In this mode, the M y the AC Wall Charger.
mic able: In this mode, the M mputer via the
microUSB cable.
s: Plugging MiFi 220 B port for charging while MacBook® is in
tandby may frequently wake up the computer.
for the first time, please insert the batter
harge fully.
hich the MiFi 2200 may be used:
microUSB Cable
is powered by the rechargeab
iFi 2200 is powered b
roUSB C iFi 2200 is powered directly by your co
W
s
ARNING: Mac User 0 into a US
12

HowtousetheBattery
riginal batteries and chargers. The warranty does not
om temperature.
When storing your battery, keep it uncharged in a cool, dark, dry place.
Never expose batteries to temperatures below -10°C (14°F) or above 45°C (113°F).
cle due to uncontrollable temperatures
l for batteries to gradually wear down and require longer charging times. If
you notice a change in your battery life, it is probably time to purchase a new battery.
Contact your local recycling center for proper battery disposal. See page 46
for details on proper disposal of the battery.
atteries in a fire because they may explode.
fo Fi 2200, read the battery safety information in the “Safety and General
” section at the back of this guide. You will need to install and charge the
elow. Some batteries perform best after several full charge/discharge
l
Battery tips
Battery life depends on the network, signal strength, temperature, features, and
accessories you use.
- Always use Novatel Wireless O
cover damage caused by non-Novatel Wireless batteries and/or chargers.
- New batteries or batteries stored for a long time may take more time to charge.
- When charging your battery, keep it near ro
-
- Never leave the device in an unattended vehi
that may be outside the desired temperature for this device.
- It is norma
WARNING: Never dispose of b
Be re using the Mi
Information
battery as described b
cyc es.
13

How to insert and charge the battery
1. Open the battery compartment, located on the bottom of the device.
Insert the battery by lining up the gold contact points on the battery with the gold
contact points in the battery compartment.
2.
3. Once the battery is secure, place the battery cover back on the device until it locks into
place.
4. Connect the microUSB end of the AC wall charger to the microUSB port of the device as
shown.
5. Plug the other end of the AC wall charger into the appropriate electrical outlet. Charge
for at least two hours.
6. You are now ready to install the drivers and VZAccess Manager software. The first time
you use the device, you must use the microUSB cable (included) and have battery
inserted in the MiFi device.
14

PoweringtheMiFi2200OnandOff
1. Press the Power LED button until the Power LED lights up solid green.
To power the device off:
1. If the device is plugged into your computing device with the USB Cable,
disconnect/unplug the USB cable from the device first.
2. Press the Power LED button until the Power LED shuts off.
owtousethemicroUSBCable
To properly connect the MiFi 2200 with the microUSB Cable:
Grip the MiFi 2200 by its sides and gently insert the USB Cable into the microUSB port.
Next, insert the other end of the cable in a Type A USB port. The cable should fit easily into
the USB port. The following occurs:
To power the device on:
H
1. The Hardware Icon appears in the taskbar (Windows) or on the Desktop (Mac).
IMPORTANT: When using the device with the microUSB Cable, fully extend the cable so
that the device remains at an appropriate distance. The recommended minimum distance
between you and the device is 8 inches.
Unplugging the MiFi 2200 when Connected with the microUSB Cable
To unplug the MiFi 2200, first terminate your Internet connection session and exit
VZAccess Manager.
Windows
e
your computing device at any time when you are not connected to the network.
To
Stan e Removal
1. End your session by selecting Disconnect from VZAccess Manager.
2. Exit VZAccess Manager to ensure that the MiFi 2200 is powered off.
2. MiFi 2200 begins charging and is powered on automatically.
Th MiFi 2200’s USB technology allows you to safely disconnect the MiFi 2200 device from
safely eject hardware:
dard Unplug/Eject Hardwar
15

3. Right-click the Safely Remove Hardware icon in the notification area, click Safely
en click Stop.
MiFi 2200 and straight out from the computer.
s powered on until you press and hold the power button to turn
2. wered off.
icon and select
Eject.
4. Simply pull the cable from both the MiFi 2200 and straight out from the computer.
you press and hold the power button to turn
Remove Hardware, click the device, and th
4. Simply pull the cable from both the
5. The device remain
it off.
Mac OS X
1. End your session by selecting Disconnect from VZAccess Manager.
Exit VZAccess Manager to ensure that the MiFi 2200 is po
3. Right-Click (Option-Right Click) the VZAccess Manager desktop
5. The device remains powered on until
it off.

16

Setting up the MiFi 2200 for the First Time
VZAccess Manager must be installed prior to activation of your device. The first
time you use the device, VZAccess Manager must be installed. Refer to the Quick
Reference Guide that came with your device for details.
IMP less in order to function.
The F
•rizon Wireless store
•d through the Verizon Wireless activation website.
PORTANT: Installation must be performed within a Mobile Broadband and/or
NationalAccess coverage area in tethered mode via the USB Cable. VZAccess Manager
must be installed prior to activation.
IMPORTANT: Before installing your new software, delete or uninstall any previously
existing modem or dialer software from your computing system using your operating
system’s Add/Remove Programs process.
ORTANT: The MiFi 2200 requires an activated account with Verizon Wire
Mi i 2200 can be activated three ways:
in a Ve
•by contacting Verizon Wireless Telesales
self-activate
IM
17

Installation:WindowsandMac
1. Turn on your computing device and close all applications.
the USB on the MiFi 2200
and the other end into the USB port of your computer.
2. Connect the MiFi 2200 to your computer using the included USB Cable.
a) Insert the USB cable into the microUSB port on
b) MiFi 2200 will power on automatically.
3
NOTE: If you are experiencing trouble easily connecting the USB cable into your
tion.
Verify that you are using a Type-A USB port on your computer.
to the microSD
computer’s USB port and into the device:
Verify that you are inserting the USB cable in the proper orienta
Verify that you are connecting the microUSB connector end of the cable in
port on the device.
3. WINDOWS: VZAccess Manager Installer automatically launches and the MiFi 2200
drivers automatically install once installation is complete (this may take few moments).
If VZAccess Manager does not automatically install, go to Start>My Computer and
click to open the CD-ROM drive icon. Select setup.exe and wait a few moments for the
software and drivers to automatically install.
MAC: The VZAccess Manager CD icon appears. Click to open and select VZAccess
Manager to launch the installer. Follow the onscreen instructions to install the software
and drivers.
Launch VZAccess Manager. The first time you launch VZAccess Manager the VZAccess
Manager Setup Wizard appears. Following the on-screen instructions to configure the
device. When prompted, select "PC Card or USB Modem" as device type. Do not select
"Tethered device".
18

4. If your device was not activated prior to installation of VZAccess Manager, the software
tion website. Follow the on-screen
will connect to the Verizon Wireless activa
instructions to complete the activation.
5. Set up is complete.
19

Ac
easily accessed after VZAccess Manager has been installed. Your
cludes two User Guides:
•VZAccess Manager Software User Guide – Details the functions of VZAccess
Manager
•The MiFi 2200 Product User Guide – Details the MiFi 2200’s hardware features and
Wi-Fi configuration.
The guides will appear on your desktop during installation. If you are unable to locate the
guides on your desktop, you may easily locate them in the VZAccess folder.
To access the User Guides:
Windows
1. Connect the MiFi 2200 to your computer.
2. Go to My Computer > Devices with Removable Storage.
3. Right-click the VZAccess Manager icon in the Devices with Removable Storage list.
A menu appears.
4. Select Explore and a window pops up. Click to open the Docs folder and the User
Guides are visible.
Mac OS X
1. Connect the MiFi 2200 to your computer.
2. Go to Finder and click to open the VZAccess Manager CD icon.
3. The VZAccess Manager folder includes the User Guides.
cessing the User Guides
The User Guides may be
device in
20