Novell GROUPWISE 7 - SECURITY POLICIES User manual

Security Policies
XVI
novdocx (en) 11 December 2007
1159
XVI
Security Policies
Chapter 80, “Securing GroupWise Data,” on page 1161
Chapter 81, “Securing GroupWise Agents,” on page 1163
Chapter 82, “Securing GroupWise System Access,” on page 1167
Chapter 83, “Secure Migrations,” on page 1169

1160 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007

Securing GroupWise Data
80
novdocx (en) 11 December 2007
1161
80
Securing GroupWise Data
Section 80.1, “Limiting Physical Access to GroupWise Servers,” on page 1161
Section 80.2, “Securing File System Access,” on page 1161
Section 80.3, “Securing Domains and Post Offices,” on page 1161
80.1 Limiting Physical Access to GroupWise
Servers
Servers where GroupWise®data resides should be kept physically secure, where unauthorized
persons cannot gain access to the server consoles.
80.2 Securing File System Access
In ConsoleOne®, Server objects for servers where GroupWise domains, post offices, and agents
reside should be assigned appropriate trustees and rights to prevent access from unauthorized
persons.
For additional data security, encrypted file systems should be used on servers where GroupWise
domains, post offices, and agents reside. Only GroupWise administrators should have direct access
to GroupWise data.
80.3 Securing Domains and Post Offices
In ConsoleOne, administrators in addition to the Admin user should be given rights judiciously, as
described in Chapter 75, “GroupWise Administrator Rights,” on page 1135.
The POA should be configured for client/server access, so that GroupWise users do not require any
direct access to any databases in the post office. For more information, see Section 36.2.1, “Using
Client/Server Access to the Post Office,” on page 486.

1162 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007

Securing GroupWise Agents
81
novdocx (en) 11 December 2007
1163
81
Securing GroupWise Agents
Section 81.1, “Setting Up SSL Connections,” on page 1163
Section 81.2, “Protecting Agent Web Consoles,” on page 1163
Section 81.3, “Protecting Agent Startup and Configuration Files,” on page 1163
Section 81.4, “Protecting Agent Log Files,” on page 1164
Section 81.5, “Protecting Agent Processes on Linux,” on page 1165
Section 81.6, “Protecting Trusted Applications,” on page 1165
81.1 Setting Up SSL Connections
All of the GroupWise®agents should be configured to use SSL connections, as described in:
“Securing the Post Office with SSL Connections to the POA” on page 498
“Securing the Domain with SSL Connections to the MTA” on page 629
“Securing Internet Agent Connections with SSL” on page 772
“Securing WebAccess Agent Connections with SSL” on page 875
“Configuring Authentication and Intruder Lockout for the Monitor Web Console” on page 985
81.2 Protecting Agent Web Consoles
If you do not provide passwords on the GroupWise agent Web consoles, unauthorized persons can
access them by simply knowing the IP address or hostname of the machine where the agent runs,
along with the HTTP port the agent is using. Set up GroupWise agent Web consoles with passwords
as described in:
“Using the POA Web Console” on page 530
“Using the MTA Web Console” on page 657
“Using the Internet Agent Web Console” on page 787
“Using the WebAccess Agent Web Console” on page 929
“Configuring Authentication and Intruder Lockout for the Monitor Web Console” on page 985
81.3 Protecting Agent Startup and Configuration
Files
The startup and configuration files for all GroupWise agents should be protected from tampering.
Agent startup files are found in the following default locations:

1164 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007
Table 81-1 Locations of GroupWise Agent Startup and Configuration Files
81.4 Protecting Agent Log Files
The log files for all GroupWise agents should be protected against access by unauthorized persons.
Some contain very detailed information about your GroupWise system and GroupWise users. Agent
log files are found in the following default locations:
Table 81-2 Locations of GroupWise Agent Log Files
Platform Directory Startup Files
NetWare sys:\system post_office.poa
domain.mta
gwia.cfg
webac70a.waa
gwdva.dva
Linux /opt/novell/groupwise/agents/share post_office.poa
domain.mta
gwia.cfg
webac70a.waa
gwdva.dva
monitor.xml
Windows c:\grpwise
c:\grpwise
c:\grpwise\gwia
c:\wabacc
c:\gwmon
post_office.poa
domain.mta
gwia.cfg
webac70a.waa
gwdva.dva
monitor.xml
Platform Directory Startup Files
NetWare vol:\post_office\wpcsout\ofs
vol:\domain\mslocal
vol:\domain\wpgate\gwia\000.prc
vol:\domain\wpgate\webac70a\000.prc
sys:\system\gwdav.dir\log
mmddpoa.nnn
mmddmta.nnn
mmddgwia.nnn
mmddweb.nnn
mmdddva.nnn
Linux /var/log/novell/groupwise/post_office.poa
/var/log/novell/groupwise/domain.mta
/var/log/novell/groupwise/domain.gwia
/var/log/novell/groupwise/domain.webac70a
/var/log/novell/groupwise/gwdva
/var/log/novell/groupwise/gwmon
nnmmpoa.nnn
mmddmta.nnn
mmddgwia.nnn
mmddweb.nnn
mmnndva.nnn
mmnnmon.nnn
mmnnhist.nnn

Securing GroupWise Agents 1165
novdocx (en) 11 December 2007
81.5 Protecting Agent Processes on Linux
On Linux, the GroupWise agents are installed to run as the root user by default. This is not a
secure configuration. Immediately after installation, you should set up a non-root user for the
agents to run as, as described in “Running the Linux GroupWise Agents as a Non-root User” in
“Installing GroupWise Agents” in the GroupWise 7 Installation Guide.
81.6 Protecting Trusted Applications
Trusted applications are third-party programs that can log into POAs and Internet Agents in order to
access GroupWise mailboxes. For background information, see Section 4.12, “Trusted
Applications,” on page 69.
Trusted applications log into GroupWise agents by using trusted application keys that are created
when the trusted application is created. It is essential that these keys are protected and not allowed to
become public. Steps you can take to protect trusted application keys include:
Associating the trusted application key with a single IP address whenever possible
Reviewing third-party log files for sensitive data such as the key before sharing them with
others
Not sharing trusted application keys with others for any reason
Removing old keys that are no longer needed
Windows \post_offce\wpcsout\ofs
\domain\mslocal
\domain\wpgate\gwia\000.prc
\domain\wpgate\webac70a\000.prc
c:\webac\gwdva.dva\log
c:\gwmon
nnmmpoa.nnn
mmddmta.nnn
mmddgwia.nnn
mmddweb.nnn
mmnndva.nnn
mmnnmon.nnn
mmnnhist.nnn
Platform Directory Startup Files

1166 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007

Securing GroupWise System Access
82
novdocx (en) 11 December 2007
1167
82
Securing GroupWise System
Access
Section 82.1, “Using a Proxy Server with Client/Server Access,” on page 1167
Section 82.2, “Using LDAP Authentication for GroupWise Users,” on page 1167
Section 82.3, “Managing Mailbox Passwords,” on page 1167
Section 82.4, “Enabling Intruder Detection,” on page 1168
82.1 Using a Proxy Server with Client/Server
Access
POAs in your GroupWise®system should be located behind your firewall. If GroupWise client
users want to access their GroupWise mailboxes from outside your firewall using the Windows
client or the Cross-Platform client, you should set up a proxy server outside your firewall to provide
access, as described in Section 36.3.1, “Securing Client/Server Access through a Proxy Server,” on
page 496. WebAccess client users access their GroupWise mailboxes through their Web browsers,
so your Web server handles the access issues for such users.
82.2 Using LDAP Authentication for GroupWise
Users
LDAP authentication provides a more secure method of mailbox access than standard GroupWise
authentication, which is the default when you set up your GroupWise system. Therefore, you should
implement LDAP authentication, as described in Section 36.3.4, “Providing LDAP Authentication
for GroupWise Users,” on page 501.
On the Post Office object, the LDAP user name that you provide on the Security property page
should be granted only browser rights in the eDirectory tree. The password for the LDAP user
should be long and randomly generated.
On the LDAP Server object, Require TLS for All Operations should be selected on the SSL/TLS
Configuration property page. On the LDAP Group object, Require TLS for Simple Binds with
Password should be selected.
On your LDAP servers, the trusted root certificate file should be write protected so that it cannot be
tampered with.
82.3 Managing Mailbox Passwords
GroupWise offers varying levels of password security, as described in Section 70.1, “Mailbox
Passwords,” on page 1111. Make sure that you understand the options available to you and that you
select the level of password security that is appropriate to your GroupWise system.

1168 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007
82.4 Enabling Intruder Detection
You can configure the POA to lock out a user that provides the wrong mailbox password too many
times, as described in Section 36.3.5, “Enabling Intruder Detection,” on page 506.