Novexx Solutions EIDOS XTO2ce User manual

User Manual XTO2ce
Edition A1 - 06/2022
Original Instructions - keep for future reference
RT809
USER MANUAL
XTO2ce
Continuous Thermal Transfer Overprinter
(TTO)
This manual contains the EC Declaration of Conformity

User Manual XTO2ce
Edition A1 - 06/2022
1
Contents
Contents
Information................................................................................................................................2
NOTES ON THE CORRECT USE OF THE PRINTER ..............................................................................2
GENERAL NOTES...............................................................................................................................2
SAFETY NOTICES...............................................................................................................................3
GENERAL PRECAUTIONS ..................................................................................................................3
DANGEROUS AREAS ON THE XTO2ce PRINTING UNIT.....................................................................4
PROTECTION ELEMENTS PROVIDED ON XTO2ce.............................................................................9
Product Description .................................................................................................................12
FUNCTIONALITY .............................................................................................................................12
PECULIARITY ...................................................................................................................................12
SYSTEM MODELS............................................................................................................................13
REAR CONNECTION PANEL ............................................................................................................17
OPERATING PANEL.........................................................................................................................18
BASIC SETTINGS..............................................................................................................................21
Operation ................................................................................................................................26
INSERTING CONSUMABLES ............................................................................................................26
THE THERMAL RIBBONS .................................................................................................................28
PRINTING........................................................................................................................................29
CREATION AND SENDING OF THE LABEL WITH EASYCODE ...........................................................30
HOW TO STORE LABEL FILES (.LM1)...............................................................................................32
HOW TO BACK UP ..........................................................................................................................32
SETTING AND MONITORING ..........................................................................................................33
STATUS MESSAGES.........................................................................................................................50
Preventive Maintenance ..........................................................................................................52
CLEANING INSTRUCTIONS..............................................................................................................52
CLEANING THE PRINT HEAD...........................................................................................................53
CLEANING THE PRINT ROLLER........................................................................................................54
CLEANING ROLLS AND RIBBON PASSAGES ....................................................................................55
CLEANING THE CARRIAGE SLIDING GUIDE.....................................................................................56
Appendix 1...............................................................................................................................57
EC DECLARATION OF CONFORMITY...............................................................................................57
Appendix 2...............................................................................................................................58
CE LABEL.........................................................................................................................................58

User Manual XTO2ce
Edition A1 - 06/2022
2
Information
Information
NOTES ON THE CORRECT USE OF THE PRINTER
Read these notes together with Chapter “Safety notices" to ensure that the printer is used correctly.
Switching on the printer.
•If the printer has been left in a cold or excessively hot environment for a considerable time, wait
at least 1 hour before switching it on to prevent humidity collecting on the internal circuits.
•After switching off, wait for a few seconds before switching on the printer again.
Use in particularly places
If the printer is going to be used in particularly humid conditions (for example cheese factories) the
protection kits are necessary.
Do not use the printer where there is a lot of oil, iron particles, or dust.
Disposal
The device may not be disposed of with household rubbish. This appliance is labelled in
accordance with European Directive 2012/19/UE concerning used electrical and
electronic appliances (waste electrical and electronic equipment - WEEE).
The guideline determines the framework for the return and recycling of used appliances
as applicable throughout the EU. To return your used device, please use the return and
collection systems available to you.
GENERAL NOTES
Validity of this manual and required compliance
This user manual refers exclusively to the electronic printer for thermal transfer to film named XTO
2.ie. It is used for proper operation and adjustment of the printer.
The printer must be properly installed and configured to allow for operation and settings.
For information about installation and maintenance, see the Installation manual.
For technical questions not covered in this operating manual request a service technician.
Technical release
Software version: up to 2.4
Hardware versions:
XTO2CELH rev.A
XTO2CERH rev.A
These instructions have to be kept for future reference and must be
available throughout the expected life of the product.
Liability and Copyright
All rights to this manual are reserved. This manual may not be reproduced in any form, either wholly
or partially, without the express written authorisation of Eidos Srl. The contents of this manual are
subject to modifications and improvements without prior warning. Every effort has been made to

User Manual XTO2ce
Edition A1 - 06/2022
3
Information
ensure the accuracy of the contents. If errors and/or inaccuracies are detected, inform Eidos Srl in
order to make the manual as exhaustive as possible. Eidos Srl accepts no responsibility for any
accidental errors or for any damage arising from the supply, scope or use of this manual.
How information is represented
Explanation of symbols
WARNING!
A warning symbol refers to risks that can result in severe or fatal injuries! The note
contains safety measures to protect affected persons.
The text within this area contains instructions for preventing damage,
recommendations as well as additional information.
SAFETY NOTICES
The printer is provided with a “EC Declaration of conformity” according to the “MACHINERY
DIRECTIVE 2006/42 / EC” which includes the reference standards for "Electromagnetic
Compatibility" and "Electrical Safety":
1. Do not start up the machine without first reading and implementing the prescriptions of the
“USER MANUAL” and the present “SAFETY NOTICES”.
2. To protect against moving parts, the printing unit is equipped with the following guards: two
fixed side covers [RF1], [RF2], a fixed rear cover [RF3] and a removable front cover [RM1] for
changing the thermal ribbon, monitored by sensors [SENS_C1] and [SENS4]. Opening the front
cover (for routine maintenance) the printing unit is positioned in “Manual” mode, i.e. in safety
conditions (all possible movement prevented).
3. The printer must not be used in an explosive environment or be used to treat explosive
materials.
4. The printer must not be used in irregular situations such as working without guards being
correctly fitted to the machine; working with products other than those prescribed.
5. After 7 years of operation on an 8-hour daily shift, a complete overhaul of the product is
recommended
GENERAL PRECAUTIONS
1. Be careful when moving or carrying the printer. Dropping the printer may cause injury or
property damage. The machine must NOT be used by the lid or the handle. For shipping by
sea or air, the parts must be packed in cases. For carriage by land, it is sufficient to package
the product in pluriball and cardboard boxes. If the machine is to be stored, the parts must
not be stacked.
2. Do not open the printer during printing.
3. When cleaning the surface of the printer case, do not use the cloth that is soaked in thinner,
trichloroethylene, benzine, ketone or similar chemicals.
4. Do not spill liquids or spray insecticide on the printer.
5. When printer trouble occurs, do not try to dissemble it. Instead, consult our service personnel.

User Manual XTO2ce
Edition A1 - 06/2022
4
Information
DANGEROUS AREAS ON THE XTO2ce PRINTING UNIT
Dangerous areas on XTO2ce.LH
Front and bottom view
Side views
Bottom view
Figure 1: dangerous areas on XTO2ce.LH - front and rear view.
Figure 3: dangerous areas on XTO2ce.LH – bottom view
A
B
s2
s1
S
H
T
t X
Y
M2
M3
M1
Y
U
P
X
W
P
Figure 2: dangerous areas on XTO2ce.LH - side views.

User Manual XTO2ce
Edition A1 - 06/2022
5
Information
Note:
The zones [A] and [B] are potentially dangerous zones during the movement of the
carriage to search for the position of the printing roller, which occurs exclusively at
the start and after the release of an anomaly. The carriage does not move during
the normal print cycle.
Carriage
Passive (non-motorized) rotating rollers on XTO2ce.LH
Ct
Sm
t
Figure 4: Dangerous areas on XTO2ce.LH - carriage.
R1
R2
R3
R4
R5
R6
Figure 5: non-motorized rollers

User Manual XTO2ce
Edition A1 - 06/2022
6
Information
Dangerous areas on XTO2ce.RH
Front and bottom view
Side views
Bottom view
s2
s1
S
H
T
t
X
Y
M1
M3
M2
Y
U
P
X
Figure 6: dangerous areas on XTO2ce.RH - front and rear view
W
P
Figure 7: dangerous areas on XTO2ce.RH - side views
A
B
Figure 8: dangerous areas on XTO2ce.RH - bottom view

User Manual XTO2ce
Edition A1 - 06/2022
7
Information
Note:
The zones [A] and [B] are potentially dangerous zones during the movement of the
carriage to search for the position of the printing roller, which occurs exclusively at
the start and after the release of an anomaly. The carriage does not move during
the normal print cycle.
Carriage
Passive (non-motorized) rotating rollers on XTO2ce.RH
Ct
Sm
t
Figure 9: dangerous areas on XTO2ce.RH - carriage
R1
R2
R3
R4
R5
R6
Figure 10: non-motorized rollers

User Manual XTO2ce
Edition A1 - 06/2022
8
Information
Definitions
S
Movement of the carriage during printing or positioning in the "Service" area.
Danger of crushing the fingers
H
Movement of the carriage when returning to Home after printing or during a return from
"Service". Danger of crushing the fingers.
A
Access from the lower left side: carriage moving to the left (print)
B
Access from the lower right side: carriage moving to the right (home position return)
T
Movement of the print head
s1
Rotation of the mandrel holding the ribbon release coil
s2
Rotation of the mandrel holding the ribbon rewinding coil
X
Movement of the carriage when returning to Home after printing or during a return from
"Service". Danger of crushing the fingers.
Y
Movement of the carriage during printing or positioning in the "Service" area.
Danger of crushing the fingers.
P
Rotation movement of the pulley and the belt for transmitting motion to the carriage
W
Rotation movement of the pulley and the belt for transmitting motion to the carriage
Ct
Print head movement servomotor cam
R1-5
Passive (non-motorized) rollers
R6
Rubberized Encoder ribbon
Hot parts highlight on XTO2ce:
Part temperatures were measured at ambient temperatures of 20 ° C and after the XTO2ce ran
at full cadence for 7 hours.
M1
Ribbon unwinding motor body
T max. 45°C
M2
Ribbon rewinding motor body
T max. 50°C
M3
Carriage movement motor body
T max. 60°C
U
CPU Heatsink
T max. 50°C
t
Print head
T max. 60°C
sm
Print head motion servo motor body
T max. 55°C

User Manual XTO2ce
Edition A1 - 06/2022
9
Information
PROTECTION ELEMENTS PROVIDED ON XTO2ce
Covers fixed with screws
WARNING!
Disconnect the 48Vdc power supply to the printer before removing the fixed guards
[RF1], [RF2], [RF3]. The fixed guards must be removed only for extraordinary
maintenance or repairs.
Movable interlocked guard [RM1]
Figure 11: fixed covers
RF3
RF2
RF1
RM1
Figure 12: movable interlocked guard [RM1]

User Manual XTO2ce
Edition A1 - 06/2022
10
Information
Monitoring sensors movable guard [RM1] inserted
External safety contacts: SAFETY_A and SAFETY_B (SAF_EXT)
NOTE: If not used, they must be jumpered.
Not interlocked movable guard [RM2]
The guard is accessible only after removing the interlocked mobile guard [RM1].
SENS_C1
Figure 14: safety contacts
[SAF_EXT]
SAFETY_A
SAFETY_B
SAFETY_SAF
Figure 15: guard
Figure 13: monitoring sensors
SENS4
Magnetic sensor
RM2
RM2
LH
RH

User Manual XTO2ce
Edition A1 - 06/2022
11
Information
Magnets and magnets ring
To ensure good fastening of the movable guard [RM1] to the XTO 2ie printing unit, magnets [mg1],
[mg2] have been provided on the printer body and magnetic rings [am1], [am2] on the ribbon
inserter.
Warning symbols on the machine
CAUTION!
Warning symbols on the machine provide important information for the
operating personnel.
➔Do not remove warning symbols.
➔Replace missing or illegible warning symbols.
Meaning of the warning symbols:
Warning symbol
Meaning
The "Hot surface" symbol informs the operator and
the staff assigned to the maintenance of the
presence of potentially dangerous hot surfaces.
Allow the device to cool off before touching it.
Figure 17: warning symbols
Figure 16: magnets
mg1
am1
mg2
am2
mg1
mg2
model LH
model RH

User Manual XTO2ce
Edition A1 - 06/2022
12
Product DESCRIPTION
Product Description
FUNCTIONALITY
The XTO2ce is an electronic printer for "thermal transfer to film" that is able to write automatically
and directly on the plastic or paper film on continuous packaging machines when the printing
operation must be performed in motion.
The XTO2ce Continuous codes the different production batches with variable text, barcodes and
logos extremely flexibly, ensuring high quality and fast printing.
The fixed head printer can be used to print directly on the production line when the product is
packaged to the benefit of printing speed and quality.
In stand-alone operation, the label files created with the EASYCODE program installed in a PC can
be loaded in the printer using the USB memory stick.
PECULIARITY
•Print Unit very light and compact, easy to be installed.
•No compressed air is needed since a motor drives the print head.
•High-quality, high-definition prints.
•Easy to service and repair; easy system of ribbon passage for changing operation.
•Easy and fast replacement of electronic components (no interference with mechanical parts).
•Programmable printing steps and format printing parameters loadable by the touch screen
display (optional) or the P.C.
•Improve unit uptime: not necessary to uninstall the print unit from the line.
•Modular assembly: mechanic + electronic.
•HMI (Human-Machine Interface) user friendly.
•Simply ribbon changing operation.
•Simply print head and print plate cleaning and replacing.
•Printer management (parameters, labels, diagnostic etc..) with local EIDOS Touch panel or
remote PC with a Web Browser.
•Possibility of automatic coding batches with variable data (date, forward or backward number
sequences, text in various languages, ingredient lists, barcodes, two-dimensional codes, logos).
•The printer can be supplied in LEFT HAND (XTO2ce.LH) or RIGHT HAND (XTO2ce.RH)
configuration. The choice of configuration depends on the assembly on the production line.
TECHNICAL FEATURES
•Print area max. 53 x 600 mm (single printing).
•53 mm (2") "corner edge" print head with 12 dots/mm definition (300 DPI).
•Max speed printing: 700 mm/s (on printable films and high quality ribbon).
•Power supply required: 48Vdc - 220W.
•Incorporated and optimized "Ribbon saving" function.
•Moving of the ribbon and the head carriage by means of two "step" motors.

User Manual XTO2ce
Edition A1 - 06/2022
13
Product DESCRIPTION
SYSTEM MODELS
XTO2ce.LH model
WARNING! Not included in the
configurations but mandatory: print roller
(57RSE04/nn) with encoder (53ENC19/1) and round support bar (49KMSX0.
WARNING! * the 45CV897/1 cable is supplied 7 meters long, but during installation
it must be cut as short as possible, to avoid the error signalling (E207) when closing
the front cover.
The cable must pass far from the cables that supply motors or
electrovalves, to avoid noises and spikes.
Figure 18: XTO2ce.LH configurations
45CV910/1
(capacitor kit to be connected
on the 48Vdc power supply
V+/V- output pins)
XTO2ce.LH
XTO2ce.LH
+
XTO2ce.LH
45CV897/1
L = 7 m*
XTO2ce.LH
45CV897/1
L = 7 m
*
7XTO2CELH-2
7XTO2CELH-1
7XTO2CELH-3
7XTO2CELH-4
45CV910/1
(capacitor kit to be connected
on the 48Vdc power supply
V+/V- output pins )
+

User Manual XTO2ce
Edition A1 - 06/2022
14
Product DESCRIPTION
XTO2ce.RH model
WARNING! Not included in the
configurations but mandatory: print roller
(57RSE04/nn) with encoder (53ENC19/1) and round support bar (49KMSX0.
WARNING! * the 45CV897/1 cable is supplied 7 meters long, but during installation
it must be cut as short as possible, to avoid the error signalling (E207) when closing
the front cover.
The cable must pass far from the cables that supply motors or
electrovalves, to avoid noises and spikes.
45CV910/1
(capacitor kit to be connected
on the 48Vdc power supply
V+/V- output pins)
XTO2ce.RH
XTO2ce.LH
+
XTO2ce.RH
45CV897/1
L = 7 m*
XTO2ce.RH
45CV897/1
L = 7 m
*
7XTO2CERH-2
7XTO2CERH-1
7XTO2CERH-3
7XTO2CERH-4
45CV910/1
(capacitor kit to be connected
on the 48Vdc power supply
V+/V- output pins)
+
Figure 19: XTO2ce.RH configurations

User Manual XTO2ce
Edition A1 - 06/2022
15
Product DESCRIPTION
XTO2ce IP version
The IP33 protection degree printer version is equipped with tropicalized electronic boards and print
head, as well as a rear cover with adequate protection for the connectors. The optional 53SDK20
touch panel offers IP55 protection. An Touch Panel - IP version (code 53SDK21) is also available, to
be installed on the electrical cabinet of the packaging machine (requires a hole).
XTO2ce.LH (IP)
45CV914/1
7XTO2CELH-1IP
45CV910/1
(capacitor kit to be connected
on the 48Vdc power supply
V+/V- output pins)
+
XTO2ce.RH (IP)
45CV914/1
7XTO2CERH-1IP
L = 7 m**
45CV910/1
(capacitor kit to be connected
on the 48Vdc power supply
V+/V- output pins)
+
L = 7 m**
Figure 20: XTO2ce - IP configurations
Touch panel
53SDK20
Rear cover
with IP protection and
angled connectors
T
ropicalized
Interface board
Tropicalized
CPU board
Tropicalized
Power board
T
ropicalized
Led board
T
ropicalized
Criptomemory
Tropicalized
E
ncoder board
T
ropicalized
carriage board
T
ropicalized print
head
Touch panel
53SDK21
Figure 21: XTO2ce-IP protected parts

User Manual XTO2ce
Edition A1 - 06/2022
16
Product DESCRIPTION
WARNING! * the 45CV897/1 cable is supplied 7 meters long, but during installation
it must be cut as short as possible, to avoid the error signalling (E207) when closing
the front cover.
The cable must pass far from the cables that supply motors or
electrovalves, to avoid noises and spikes.
Touch panel 53SDK21
It is a capacitive 7 "TFT colour graphic display connected via ethernet to the printer, from which it
is also powered. To apply the EIDOS Touch Panel to the packaging machine, it is necessary to make
a hole, to be made as per the drawing below. The fixing takes place by means of a sealing gasket
with IP55 protection degree. The EIDOS Touch Panel is therefore also suitable for applications in
humid or dusty environments.
Note: the maximum thickness of the sheet metal on which the Touch Panel can be applied is 4.5
mm
Figure 22: EIDOS Touch Panel 53SDK21
Place the panel, centering it
inside the hole on the electrical
panel of the packaging
machine, tightening the metal
plate from the inside, using the
screws and washers.
hole to be drilled

User Manual XTO2ce
Edition A1 - 06/2022
17
Product DESCRIPTION
REAR CONNECTION PANEL
WARNING!
This printer operates using 48Vdc – 220W voltage! Touching live electrical parts may
expose you to hazardous electrical currents and may lead to burns.
➔
Make sure that the printer is switched off before connecting the power cable.
➔Only connect the 48Vdc Power Supply
to a grounded power socket fitted to
authorised standards.
A. Connection to the 48Vdc-220W Power Supply
B. RS232 connection DSUB 9 pin female
C. USB-A/USB-B interface for label files exchange with USB memory stick (disk A, disk B)
D. USB device for direct connection to the PC (it does not work on XTO printer)
E. LAN Network connection (Ethernet 10/100/1000)
F. Ethernet POE port for EIDOS HMI connection (XTO printer IP: 10.0.0.1 not changeable)
G. Digital 24V I/O SIGNALS for print command, anomaly, external safety, page I/O...
connections
H. CAN-BUS port for external devices (not managed by XTO)
I. Encoder port for packaging line speed detection
J. Connection to ground
For the cable connections refer to the Technical manual.
Figure 23: rear panel

User Manual XTO2ce
Edition A1 - 06/2022
18
Product DESCRIPTION
OPERATING PANEL
The operating panel is a comfortable external control panel for the XTO2ce, which can be operated
display devices. You can use the 59SDK18 device or a PC.
Prerequisites
•Display device, e.g. 59SDK18, Raspberry, tablet, PC
•Ethernet connection to the XTO2ce printer
The software program has been developed and tested for the following browsers:
•Chromium (Raspberry Pi)
•Chrome (18 and up)
•Firefox (35 and up)
•Safari (6 and up)
•Edge (44 and up)
Main Functions
Manual mode
1
Printer serial number
2
ESC button to select another printer or remote-
control panel
3
Printer data: Current Date, Current Time,
Progressive number, Quantity number
4
Label view
5
Label Pan and zoom
6
Go to Parameters Setting menu
7
Load a new label (this icon appears if the
label does not contain any operator data)
Set new operator data (this icon appears if
the label contains some operator data
8
Go to Ready
9
Go to Info page
10
Current Printer status
11
Zebra Emulation actives (Zeb: 8 = 200dpi, Zeb:12=300dpi, Zeb:24=600dpi)
Line Speed: speed of the packaging line, detected by the encoder.
6
7
8
9
1
10
3
5
4
2
12
14
Figure 24: manual mode view
11
13