Novus NDR-HA4104 User manual

NDR-HA4104
U ser’s ma n ua l
(s h o rt fo rm )

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
2
1. FOREWORD INFORMATION
NDR-HA4104 recorder are designed especially for CCTV systems. A very efficient H.264
compression is utilised, guaranteeing detailed, high quality images recorded for a long period of time.
It also allows for flexible recording parameters adjustment depending on system requirements.
1.1. Main characteristics
• Compatible with color (NTSC, PAL) and black-and-white (CCIR, EIA-170) Video Sources,
• Auto detection for NTSC and PAL,
• Multiple monitor connectors: 1 BNC Video Out, 1 VGA
• Multiple search modes (Date/Time, Calendar, Event),
• System menu displayed on the screen (OSD menu),
• Up to 100 images per second recording speed ,
• Hard drive overwrite function,
• 2 USB 2.0 ports,
• Simultaneous recording, playback, live monitoring and network connection,
• User-friendly graphic interface,
• 4-Channel Audio Recording ,
• Speaker output,
• Built-in text input for ATM and POS,
• Alarm Connections Include: Input, Output and Reset Input
• Remote access to Live Monitoring Feature, recordings, menu settings, system diagnostics and
camera control via TCP/IP network or modem connection,
• Embedded Web Server ,
• Server/recorder time check,
• Self-diagnostics with automatic notification,
• Infrared remote control,
• Advanced system of user privileges and access rights,
• H.264 compression with image quality parameter configuration,
• RS-485 port for remote control via NV-KBD70 system keyboard ,
• Ability to copy files onto the USB,
The list of recommended disk models and their capacity is available on Novus Security website in the
Compatible Disks and DVD file in the product tab
FOREWORD INFORMATION

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
3
1.2. RECORDER’S TECHNICAL DATA
Model NDR-HA4104
Operation Mode QUADRUPLEX
Operating System Linux
Video Input 4 x NC,
Video Output Main Monitor (1 x NC, 1 x VGA)
Alarm Input 4
Alarm Output 2 relays
Audio Input/Output 2 x RCA / 1 x RCA
Recording Speed 100 fps (360x 288), 50 fps (720 x 288), 25 fps (720x576),
Compression H.264 - own algorithm
Recording Resolution 720x 576,720 x 288, 360 x 288
Recording Mode Time-lapse, Event (Alarm, Motion detection and/or “Text-in”)
Display Speed 100 fps (real-time)
Display Screen Full screen, 2, sequence, freeze image function, digital zoom of a chosen screen area: 2x
Motion Detection
768 detection windows (24x32 grid) with sensitivity & active areas cells number needed for alarm
activation defined individually for each channel
Video Loss Detection Yes
Schedule Recording
Individually adjustable for each day/specific days (holidays etc.) per camera, combination
of individual recording modes possibility
Recorded Data Search y date/time or events (motion, disappeared object, “Text-in”)
Event History Log Up to 5 000 system events and unlimited alarm events
Time Synchronization Automatic time synchronization with NTP server
System Diagnostic
Automatic control of HDD bad sectors number (“Health”) & temperature status with local and network
notification function
Storage 1 HDD
ackup US Flash Memory through US port, through the network
DVD-RW Drive Not supported
External Ports
1 x Ethernet - RJ-45 interface, 10/100 Mbit/s, 2 x US 2.0 for external drives (PC mouse, Flash Memory),
1 x RS-485 for PTZ cameras or NV-K D70, NV-K D60 & NV-K D30 keyboards,
1 x RS-232 for POS, ATM, AC etc.
PTZ Functions PTZ cameras control directly from the device and through the network (RASplus, IE)
Protocol Novus-C, Novus-C1, Pelco-D and others
Control
Front panel, Network (RASplus, IE), NV-K D70,NV-K D60, NV-K D30 keyboards, US PC mouse,
Remote Control
Set-up Multi-lingual On Screen Display (OSD)
Software RASplus
User Authorization Creation of user groups and accounts with diverse grants, password protection
Auto System Recovery Hardware WATCHDOG function
Power Supply
100~240 VAC
Power Consumption Max. 25 W (with HDD)
Operating Temperature 5°C ~ 40°C
Relative Humidity 0% ~ 80% (non-condensing)
Dimensions (mm) 265 (W) x 52 (H) x 288 (D)
Weight 1.7 kg (without HDD)
FOREWORD INFORMATION

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
4
EMC (2004/108/EC) and LVD (2006/95/EC ) Directives
CE Marking
Our products are manufactured to comply with requirements of following directives and national
regulations implementing the directives:
• Electromagnetic compatibility EMC 2004/108/EC.
• Low voltage LVD 2006/95/EC with further amendment. The Directive applies to electrical
equipment designed for use with a voltage rating of between 50VAC and 1000VAC as well
as 75VDC and 1500VDC.
WEEE Directive 2002/96/EC
Information on Disposal for Users of Waste Electrical and Electronic Equipment
This appliance is marked according to the European Directive on Waste Electrical and Electronic
Equipment (2002/96/EC) and further amendments. By ensuring this product is disposed of correctly,
you will help to prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or the documents accompanying the product, indicates that this appliance
may not be treated as household waste. It shall be handed over to the applicable collection point for the
waste electrical and electronic equipment for recycling purpose. For more information about recycling
of this product, please contact your local authorities, your household waste disposal service or the shop
where you purchased the product.
RoHS Directive 2002/95/EC
Concerning for human health protection and friendly environment, we assure that our products falling
under RoHS Directive regulations, regarding the restriction of the use of hazardous substances in
electrical and electronic equipment, were designed and manufactured in compliance with mentioned
regulation. Simultaneously, we claim that our products were tested and do not contain hazardous
substances exceeding limits which could have negative impact on human health or natural
environment.
Information
The device, as a part of professional CCTV system used for surveillance and control, is not designed
for self installation in households by individuals without technical knowledge.
COMMENTS AND WARNINGS

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
5
SAFETY REQUIREMENTS
ATTENTION!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT PROVISIONED FOR THE GIVEN
PRODUCT IN ITS USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE
PRODUCT, OR THAT ARISES FROM THE NORMAL APPLICATION OF THE PRODUCT, ITS
MANUFACTURER MUST BE CONTACTED OR THE RESPONSIBILITY OF THE
MANUFACTURER FOR THE RESULTS OF SUCH AN ACTION SHELL BE EXCLUDED.
1. The installation of NDR-HA4208, NDR-HA4416 should be made by a qualified service person or a
professional safety system installer.
2. Recorders mustn’t be placed in places where ventilating holes are partially or fully covered.
3. User’s interference inside the device is not allowed and is unnecessary as it does not have any
systems which require adjusting or which are suitable for self-repair. You mustn’t dismantle the
recorder or remove any single fastening screws. If any repairs are necessary contact the service.
The device must be take care of and protected against any mechanical damage.
4. The recorder has to be protected against humidity and dust. In case the recorder had a contact with
water react immediately: switch off the power supply and contact the authorised Novus service. If
the device gets dirty it might get damaged or electrocute someone.
5. The device can only be cleaned with a damp cloth after the power supply has been switched off.
Avoid strong detergents (liquids and sprays). Mild detergents can be used if the recorder becomes
very dirty.
6. Power supply unit cords and signal cords should be laid in a way that eliminates the risk of
mechanical damage; special attention should be paid to the plug. Be careful not to overload sockets
and extension cords so that there is no fire.
7. To avoid recorder’s damage vision and control signals should be equipped with systems protecting
against disturbances, over voltage and atmospheric discharge that are in compliance with Polish
regulations. It is also advised to use ground loop isolators.
8. The device mustn’t be used in conditions which do not fulfil operating requirements as far as power
supply, relative humidity or air temperature are concerned.
9. You cannot allow any metal objects get inside the recorder. It might cause serious damage. If a
metal object gets inside the device contact the authorised Novus service immediately.
10. The manufacturer does not bear responsibility for damage or loss of data stored on HDDs or other
media occurred during the usage of the product.

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
6
1. FOREWORD INFORMATION......................................................................6
1.1 Main Characteristics....................................................................................6
1.2 Recorder’s technical data ............................................................................7
2. STARTING THE DEVICE..............................................................................8
2.1 Getting ready to work.................................................................................8
2.2 Electrical connection and other rear panel components............................9
2.3 Connecting peripherals...........................................................................11
2.4 Front panel description............................................................................12
2.5 Remote controller....................................................................................14
2.6 HDD Installation ....................................................................................14
TABLE OF CONTENT

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
7
Unpack the device carefully.
After unpacking please ensure that package contains the following items:
Power Supply
100-240VAC / 12VDC
If any of the items have been damaged during transport, please pack them back into the original
packaging and contact your supplier.
ATTENTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it from a
location with lower ambient temperature is forbidden, as the condensing water vapour may cause short-
circuits and damage the device as a result.
Note: Please get familiarized with description and functions of rear panel inputs.
2. STARTING THE DEVICE
2.1. Getting ready to work
NDR-HA4104 recorder.
Power cord.
CD with a user’s manual and
network software. User’s manual and network
software guide
STARTING THE DEVICE
Remote controller

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
8
2.2. Electrical connectors and other rear panel components
NDR-HA4104 rear view
1. VIDEO IN video inputs for connecting video signal sources with the DVR.
2. AUDIO IN 4 audio mono inputs (RCA type) for connecting microphones.
Note: sound recording may be conducted only when law regulations of
a given country allow for such activities.
Audio inputs are not equipped with pre-amplifiers, so connecting the
microphones directly to the inputs is not advised. Usage of preamplifiers is
recommended.
AUDIO OUT Audio output for connecting speaker and amplifier. Connecting the speaker
directly to the outputs is not advised. Usage of pre-amplifier is
recommended.
3. RESET
4. VIDEO OUT, VGA Main monitor connectors, BNC or VGA type. VGA output allows for
connecting the main monitor in the computer mode. Please use signal
cord provided with the monitor when using said connection type.
5. NETWORK RJ-45 connector for connecting the DVR to the computer network in
10/100Mb/s standard.
6. ALARM INPUTS 16 or 8 (depending on a model) alarm inputs, which may be set either as
normal open (N.O.) or normal closed (N.C.). In order to detect the alarm
signal it should last 0.5sec at least. All GND connectors are common
grounded. The ground of the alarm device needs to be connected to one of
the GND connectors.
ALARM OUTPUTS The DVR is capable of activating external devices such as buzzers, halide
lamps, sirens etc. via its relay outputs. Max current for the output is 1A for
30VDC and 0.5 A for 125VAC.
STARTING THE DEVICE

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
9
NDR-HA4104 rear view
STARTING THE DEVICE
7. RS-485 The DVR can be controlled remotely by an external device or control
system, such as a control keyboard (NV-KBD30, NV-KBD70), using
RS485 half-duplex serial communications signals. The RS485 connector
can also be used to control PTZ (pan, tilt, zoom) cameras or text-in devices.
Connect RX+/TX+ and RX-/ TX- of the control system to the + and –
connectors of the DVR respectively.
8. RS-232 PORT Allows to connect modems for remote video preview, connecting external
keyboards (optional) or devices generating the ASCII codes that provide
additional information (cash registers, ATMs). Only one of the devices may
be connected at once. If transmission standard of connected d e v i c e i s
different than RS-232, you need to use additional device (e.g. such as
NVRS-001RSC) to change standard transmission from RS-485 to
RS-232.
Attention: Cable for connecting to RS-232 port is not included in the set. Please make sure that the
cable possessed is appropriate. (DB9S female connector).
9. POWER CONNECTOR

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
10
2.3. Connecting peripherals
System connection should be performed only by qualified personnel. Please familiarize yourself with
the scheme located below, depicting possible implementation of the DVR in the system, before
installation.
Depending on requirements, each system will have different number of peripherals connected.
Monitors, cameras etc. should be purchased separately, depending on current needs. Detailed
description of peripheral connections can be found in the following chapters of this manual.
STARTING THE DEVICE

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
11
2.4. Front panel description
NDR-HA4104 View
STARTING THE DEVICE
NOTE: a mouse with USB interface can be used for recorder’s control and setting. All the details can
be found in the following chapters of the manual.
1. CAMERA BUTTONS Pressing individual camera buttons will cause the selected
camera to display full screen, and pressing the button again
toggles between different display formats. Buttons 1 to 4 are also
used to enter passwords. In the PTZ mode, pressing the button 1
zooms in the screen and the button 2 zooms out the screen, and
pressing the button 3 focuses near and button 4 focuses far.
2. HDD LED Flashing LED indicates that the HDD is either in recording or
playback mode.
3. ALARM LED Solid light when alarm has been triggered and / or internal
buzzer is active.
4. ARROW BUTTONS These buttons are used to navigate through menus and GUI. You
can also use them to change numbers by highlighting a number in
the menu and using the Up and Down arrow buttons to increase or
decrease the number’s value.
Used for navigating through OSD menu, and changing parameter
values with and buttons. In PTZ mode navigation buttons
are used for speed dome cameras control.
In DISPLAY mode pressing fast playback butons
buttons speeds up the playback, with the speed indicated by
icons visible on the screen.
press or in PAUSE mode to watch picture frame by frame.
5. PLAY / PAUSE Press the PLAY/PAUSE button to play stored images at
normal speed. Pressing the button in the P l a y b a c k
mode pauses the video.

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
12
6. MENU Press MENU button to enter the DVR menu.
Pressing and holding MENU button for 2 seconds while in screen
division display mode starts sequence display.
7. PTZ/ZOOM BUTTON Pressing the PTZ/ZOOM button in live monitoring mode
enters the zoom mode, and pressing it again exits the zoom mode.
When in said mode, a rectangle displays on the screen. A
rectangle shows the area that will be enlarged. You can move the
rectangle around using the arrow buttons. Pressing the
(Play/ Pause) button enlarges the area in rectangle.
In live monitoring mode, pressing and holding the PTZ/ Z O O M
button for three seconds or longer enters the PTZ mode while
pressing and holding the button again for three seconds or
longer exits the PTZ mode. When in the PTZ mode, pressing the
arrow buttons or MENU button allows you to control properly
configured cameras.
8. PANIC Pressing the PANIC button starts panic recoding of all camera
channels, and displays them on the screen. Pressing the button
again stops panic recording.
9. SEARCH Pressing the SEARCH button enters search mode, and pressing
it again exits the search mode. When entering the search m o d e ,
video is paused. Pressing the (Play/Pause) button plays back
video at regular speed. The screen displays when the DVR is in
the Pause mode and when the DVR is playing a video. The
button is also used to load a Preset View in the PTZ mode.
10. USB A USB port on the front panel is provided to connect external hard
disk or flash drives for video clip copying or system upgrades.
Position external drives close enough to the DVR so that you can
make the cable connections, usually less than 6 feet. Use the USB
cable provided with the HDD to connect it to the DVR. A
USB mouse (not supplied) can be connected to the USB port. You
can use the mouse to navigate through the screens and menus much
like you would on a computer. A USB to Serial converter can be
connected to the USB port. Multiple text-in devices can be used
with a USB to Serial converter.
STARTING THE DEVICE

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
13
Remote Controller
NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.
2.5 HDD installation
DVR NDR-HA4104 supports 1 HDD.
NOTE: To obtain the latest info on compatible disks together with their maximum supported
capacities please contact your supplier or visit the www.novuscctv.com website.
NOTE: HDDs previously used in other devices need to be formatted. Please keep that in
mind due to the possibility of important data loss.
ATTENTION: The list of compatible HDDs contains all the HDDs that are compatible with a
given DVR including HDDs designed to office use (desktop disks). However, due
to the fact that reliability of the recording process and data safety are most
important factors of any CCTV system, we strongly advise to use HDDs
designed for continuous (24/7) operation.
TURNING ON THE POWER
After connecting the power cord to the DVR system initialization takes approximately 60
seconds.
STARTING THE DEVICE

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
14
Before installing a hard drive (HDD), please make sure the DVR is unplugged.
To install an HDD in your DVR :
1. Remove the lid of the DVR by unfastening the
screws.
2. Install HDD in the HDD rack using the provided screws. Connect power and SATA cables to the
HDD.
STARTING THE DEVICE

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
15
STARTING THE DEVICE
4. Connect HDD to the motherboard of the DVR using included SATA cables.
5. Put the lid back on the DVR casing and fasten screws.

NDR-HA4104 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
16
2011-11-10 RR
AAT Holding sp. z o.o., 431 Pulawska St., 02-801 Warsaw, Poland
t l.: [phone], fax: [phone]
www.novuscctv.com

NDR-HA4104
i n s t ru k cj a o b sł ug i
(wersja skrócona)

NDR-HA4104 - Instrukcja obsługi wer. 1.0
Wszelkie prawa zastrzeżone © AAT Holding sp. z o.o.
2
Dyrektywy EMC (2004/108/EC) i LVD (2006/95/EC)
Oznakowanie CE
Nasze produkty spełniająwymagania zawarte w dyrektywach oraz przepisach krajowych
wprowadzających dyrektywy: Kompatybilność elektromagnetyczna EMC 2004/108/EC.
Niskonapięciowa LVD 2006/95/EC. Dyrektywa ma zastosowanie do sprzętu elektrycznego
przeznaczonego do użytkowania przy napięciu nominalnym od 50VAC do 1000VAC oraz od 75VDC do
1500VDC.
Dyrektywa WEEE 2002/96/EC
Informacja dla użytkowników o pozbywaniu sięurządzeńelektrycznych i elektronicznych
Niniejszy produkt został oznakowany zgodnie z DyrektywąWEEE (2002/96/EC) oraz późniejszymi
zmianami, dotyczącązużytego sprzętu elektrycznego i elektronicznego. Zapewniając prawidłowe
złomowanie przyczyniająsięPaństwo do ograniczenia ryzyka wystąpienia negatywnego wpływu
produktu na środowisko i zdrowie ludzi, które mogłoby zaistniećw przypadku niewłaściwej utylizacji
urządzenia.
Symbol umieszczony na produkcie lub dołączonych do niego dokumentach oznacza, że nasz produkt nie
jest klasyfikowany jako odpad z gospodarstwa domowego. Urządzenie należy oddaćdo odpowiedniego
punktu utylizacji odpadów w celu recyklingu. Aby uzyskaćdodatkowe informacje dotyczące recyklingu
niniejszego produktu należy skontaktowaćsięz przedstawicielem władz lokalnych, dostawcąusług
utylizacji odpadów lub sklepem, gdzie nabyto produkt.
Dyrektywa RoHS 2002/95/EC
Informacja dla użytkowników dotycząca ograniczenia użycia substancji niebezpiecznych w sprzęcie
elektrycznym i elektronicznym.
W trosce o ochronęzdrowia ludzi oraz przyjazne środowisko zapewniamy, że nasze produkty
podlegające przepisom dyrektywy RoHS, dotyczącej użycia substancji niebezpiecznych w sprzęcie
elektrycznym i elektronicznym, zostały zaprojektowane i wyprodukowane zgodnie z wymaganiami tej
dyrektywy. Jednocześnie zapewniamy, że nasze produkty zostały przetestowane i nie zawierająsubstancji
niebezpiecznych w ilościach mogących niekorzystnie wpływaćna zdrowie człowieka lub środowisko
naturalne.
Informacja
Urządzenie, jako element profesjonalnego systemu telewizji dozorowej służącego do nadzoru i kontroli,
nie jest przeznaczone do samodzielnego montażu w gospodarstwach domowych przez osoby nie
posiadające specjalistycznej wiedzy.
UWAGI I OSTRZEŻENIA

NDR-HA4104 - Instrukcja obsługi wer. 1.0
Wszelkie prawa zastrzeżone © AAT Holding sp. z o.o.
3
UWAGA!
ZNAJOMOŚĆ NINIEJSZEJ INSTRUKCJI JEST NIEZBĘDNYM WARUNKIEM PRAWIDŁOWEJ
EKSPLOATACJI URZĄDZENIA. PROSIMY O ZAPOZNANIE SIĘZ NIM PRZED PRZYSTĄPIENIEM DO
INSTALACJI I OBSŁUGI REJESTRATORA.
UWAGA !
NIE WOLNO DOKONYWAĆŻADNYCH SAMODZIELNYCH NAPRAW. WSZYSTKIE
NAPRAWY MOGĄBYĆREALIZOWANE JEDYNIE PRZEZ WYKWALIFIKOWANYCH
PRACOWNIKÓW SERWISU .
1. Przed zainstalowaniem i rozpoczęciem eksploatacji należy dokładnie zapoznaćsięz niniejszą
instrukcjąobsługi i zawartymi w niej wymogami bezpieczeństwa;
2. Uprasza sięo zachowanie instrukcji na czas eksploatacji rejestratora na wypadek konieczności
odniesienia siędo zawartych w niej treści;
3. Należy skrupulatnie przestrzegaćwymogów bezpieczeństwa opisanych w instrukcji, gdyżmająone
bezpośredni wpływ na bezpieczeństwo użytkowników i trwałość oraz niezawodność urządzenia;
4. Wszystkie czynności wykonywane przez instalatorów i użytkowników musząbyćrealizowane
zgodnie z opisem zawartym w instrukcji;
5. W czasie czynności konserwatorskich urządzenie musi byćodłączone od zasilania;
6. Nie wolno stosowaćżadnych dodatkowych urządzeńlub podzespołów nie przewidzianych
i nie zalecanych przez producenta;
7. Nie wolno używaćrejestratora w środowisku o dużej wilgotności (np. w pobliżu basenów, wanien,
w wilgotnych piwnicach);
8. Nie należy instalowaćtego urządzenia w miejscu, gdzie nie można zapewnićwłaściwej wentylacji
(np. zamknięte szafki, itp.), co powoduje zatrzymanie sięciepła i w konsekwencji może
doprowadzićdo uszkodzenia;
9. Nie wolno umieszczaćrejestratora na niestabilnych powierzchniach. Rejestrator musi być
instalowany przez wykwalifikowany personel o odpowiednich uprawnieniach według zaleceń
podanych w niniejszej instrukcji;
10.Urządzenie może byćzasilane jedynie ze źródeł o parametrach zgodnych ze wskazanymi przez
producenta w danych technicznych kamery. Dlatego też, zabrania sięzasilania rejestratora ze źródeł
o nieznanych, niestabilnych lub niezgodnych z wymaganiami określonymi przez producenta
parametrach;
11. Wyłączenie odpowiedzialności w przypadku uszkodzenia danych zawartych na dysku lub innych
urządzeniach:
Producent nie ponosi odpowiedzialności w razie uszkodzenia lub utraty w trakcie eksploatacji
Produktu danych zawartych na dyskach lub innych urządzeniach.
Przed wykonaniem czynności, która nie jest przewidziana dla danego Produktu w instrukcji obsługi,
innych dokumentach dołączonych do Produktu lub nie wynika ze zwykłego przeznaczenia Produktu,
należy, pod rygorem wyłączenia odpowiedzialności Producenta za następstwa takiej czynności,
WARUNKI BEZPIECZEŃSTWA

NDR-HA4104 - Instrukcja obsługi wer. 1.0
Wszelkie prawa zastrzeżone © AAT Holding sp. z o.o.
4
SPIS TREŚCI................................................................................................................................. 4
1. INFORMACJE WSTĘPNE.................................................................................................... ..6
1.1. Charakterystyka ogólna....................................................................................................... 6
1.2. Dane techniczne rejestratora cyfrowego NDR-HA4104.................................................. ...7
2. URUCHAMIANIE URZĄDZENIA......................................................................................... 8
2.1. Przygotowanie urządzenia do pracy ................................................................................. 8
2.2. Złącza elektryczne i inne elementy panelu tylnego .......................................................... 9
2.3. Podłączanie urządzeńperyferyjnych .............................................................................. 10
2.4. Opis płyty czołowej........................................................................................................ 11
2.5. Instalacja dysków twardych .......................................................................................... 13
NOTATKI ................................................................................................................................... 17
SPIS TREŚCI