Novus NDR-BA3104-II User manual

U s e r ’s m a n u a l
NDR-BA3104-II

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
2
EMC (2004/108/EC) and LVD (2006/95/EC ) Directives
CE Marking
Our products are manufactured to comply with requirements of following directives and national
regulations implementing the directives:
 Electromagnetic compatibility EMC 2004/108/EC.
 Low voltage LVD 2006/95/EC with further amendment. The Directive applies to electrical
equipment designed for use with a voltage rating of between 50VAC and 1000VAC as well
as 75VDC and 1500VDC.
WEEE Directive 2002/96/EC
Information on Disposal for Users of Waste Electrical and Electronic Equipment
This appliance is marked according to the European Directive on Waste Electrical and Electronic
Equipment (2002/96/EC) and further amendments. By ensuring this product is disposed of correctly,
you will help to prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or the documents accompanying the product, indicates that this appliance
may not be treated as household waste. It shall be handed over to the applicable collection point for the
waste electrical and electronic equipment for recycling purpose. For more information about recycling
of this product, please contact your local authorities, your household waste disposal service or the shop
where you purchased the product.
RoHS Directive 2002/95/EC
Concerning for human health protection and friendly environment, we assure that our products falling
under RoHS Directive regulations, regarding the restriction of the use of hazardous substances in
electrical and electronic equipment, were designed and manufactured in compliance with mentioned
regulation. Simultaneously, we claim that our products were tested and do not contain hazardous
substances exceeding limits which could have negative impact on human health or natural
environment.
Information
The device, as a part of professional CCTV system used for surveillance and control, is not designed
for self installation in households by individuals without technical knowledge.
The manufacturer is not responsible for defects and damages resulted from improper or inconsistent
with user’s manual installation of the device in the system.
IMPORTANT SAFEGUARDS AND WARNINGS

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
3
ATTENTION!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT PROVISIONED FOR THE GIVEN
PRODUCT IN ITS USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE
PRODUCT, OR THAT ARISES FROM THE NORMAL APPLICATION OF THE PRODUCT, ITS
MANUFACTURER MUST BE CONTACTED OR THE RESPONSIBILITY OF THE
MANUFACTURER FOR THE RESULTS OF SUCH AN ACTION SHELL BE EXCLUDED.
1. The installation of this device should be made by a qualified service person or a professional safety
system installer.
2. Device mustn’t be placed in places where ventilating holes are partially or fully covered.
3. User’s interference inside the device is not allowed and is unnecessary as it does not have any
systems which require adjusting or which are suitable for self-repair. You mustn’t dismantle the
recorder or remove any single fastening screws. If any repairs are necessary contact the service.
The device must be take care of and protected against any mechanical damage.
4. The device has to be protected against humidity and dust. In case the recorder had a contact with
water react immediately: switch off the power supply and contact the authorised Novus service. If
the device gets dirty it might get damaged or electrocute someone.
5. The device can only be cleaned with a damp cloth after the power supply has been switched off.
Avoid strong detergents (liquids and sprays). Mild detergents can be used if the recorder becomes
very dirty.
6. Power supply unit cords and signal cords should be laid in a way that eliminates the risk of
mechanical damage; special attention should be paid to the plug. Be careful not to overload sockets
and extension cords so that there is no fire.
7. To avoid devices’s damage vision and control signals should be equipped with systems protecting
against disturbances, over voltage and atmospheric discharge that are in compliance with Polish
regulations. It is also advised to use ground loop isolators.
8. The device mustn’t be used in conditions which do not fulfil operating requirements as far as power
supply, relative humidity or air temperature are concerned.
9. You cannot allow any metal objects get inside the recorder. It might cause serious damage. If a
metal object gets inside the device contact the authorised Novus service immediately.
10. The manufacturer does not bear responsibility for damage or loss of data stored on HDDs or other
media occurred during the usage of the product.
Attention!
Technical changes reserved without prior notice and printing errors possible.
IMPORTANT SAFEGUARDS AND WARNINGS

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
4
TABLE OF CONTENT
TABLE OF CONTENT.................................................................................................................................4
1. FOREWORD INFORMATION ...............................................................................................................6
1.1. Main characteristics ............................................................................................................................6
1.2. NDR-BA3104-II ................................................................................................................................7
1.3. Package contents.................................................................................................................................8
2. STARTING THE DEVICE .......................................................................................................................9
2.1. Electrical connection and other rear panel elements of NDR-BA3104 DVR...................................9
2.2. HDD mounting...............................................................................................................................10
2.3. Turning on the power .....................................................................................................................12
3. RECORDER’S OPERATION ................................................................................................................13
3.1. Front panel description .....................................................................................................................13
3.2. Controlling via USB mouse ..............................................................................................................13
3.3. Controlling via IR remote controller.................................................................................................13
4. RECORDER’S MENU ............................................................................................................................15
4.1. Startup wizard...................................................................................................................................15
4.2. Menu operating.................................................................................................................................17
4.3. Live monitoring ................................................................................................................................18
4.3.1. Sequence .................................................................................................................................19
4.3.2. Camera adjustment ..................................................................................................................19
4.3.3. Zoom function .........................................................................................................................20
4.4. Searching video ................................................................................................................................20
4.5. Playback ...........................................................................................................................................24
4.6. Backup of recorded video .................................................................................................................25
4.7. Setting English language ..................................................................................................................27
5. RECORDER’S CONFIGURATION......................................................................................................29
5.1. Setup .................................................................................................................................................30
5.1.1. Basic........................................................................................................................................30
5.1.1.1. System............................................................................................................................31
5.1.1.2. Date and time .................................................................................................................32
5.1.1.3. DST................................................................................................................................32
5.1.2. Live view.................................................................................................................................33
5.1.2.1. Live ................................................................................................................................34
5.1.2.2. Main monitor .................................................................................................................34
5.1.2.3. Mask ..............................................................................................................................35
5.1.3. Record .....................................................................................................................................36
5.1.3.1. Record............................................................................................................................36
5.1.3.2. Record bit rate................................................................................................................37
5.1.3.3. Time ...............................................................................................................................38
5.1.3.4. Stamp .............................................................................................................................38
5.1.3.5. Recycle record ...............................................................................................................39
5.1.3.6. Snap ...............................................................................................................................40
5.1.4. Schedule ..................................................................................................................................41
5.1.4.1. Schedule.........................................................................................................................41
5.1.4.2. Motion............................................................................................................................42
5.1.5. Alarm.......................................................................................................................................42
5.1.5.1. Motion............................................................................................................................43
5.1.5.2.1. Motion ..................................................................................................................43
5.1.5.2.2. Schedule................................................................................................................44
5.1.5.2. Video loss ......................................................................................................................45
5.1.5.3. Other alarm ....................................................................................................................46
5.1.5.4. Alarm out .......................................................................................................................46

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
5
TABLE OF CONTENT
5.1.5. Network ............................................................................................................................... ...47
5.1.5.1. Network...................................................................................................................... ...47
5.1.5.2. Sub-stream.................................................................................................................. ...48
5.1.5.3. Email .......................................................................................................................... ...48
5.1.5.4. Network Serwer.......................................................................................................... ...49
5.1.5.5. Other settings.............................................................................................................. ...50
5.1.6. Users .................................................................................................................................... ...51
5.1.7. Advanced ............................................................................................................................. ...52
5.1.7.1. Reset........................................................................................................................... ...53
5.1.7.2. Import / Export ........................................................................................................... ...53
5.1.7.3. Black / White list........................................................................................................ ...54
5.2. Information ...................................................................................................................................... 55
5.2.1. System ................................................................................................................................. ...55
5.2.2. Event.................................................................................................................................... ...56
5.2.3. Log....................................................................................................................................... ...56
5.2.4. Network ............................................................................................................................... ...57
5.2.5. On-line user ......................................................................................................................... ...57
5.2.6. Record.................................................................................................................................. ...58
5.3. Disk management............................................................................................................................. 58
5.4. Upgrade............................................................................................................................................ 60
5.5. Logoff .............................................................................................................................................. 61
5.6. Shut down ........................................................................................................................................ 61
6. NETWORK OPERATIONS UTILIZING WEB BROWSER............................................................. 62
6.1. Recommended PC specification for web browser connections ........................................................ 62
6.2. Establishing a connection.............................................................................................................. ...62
6.3. Live monitoring interface.............................................................................................................. ...64
6.4. Searching records .......................................................................................................................... ...66
6.5. Playback interface ......................................................................................................................... ...68
6.6. Backup interface............................................................................................................................ ...69
6.7. Remote configuration interface ..................................................................................................... ...70
6.8. Tools interface............................................................................................................................... ...71
6.9. Information interface..................................................................................................................... ...73

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
6
1. FOREWORD INFORMATION
1.1. Main characteristics
 Quadruplex: simultaneous recording, live monitoring, playback or backup and networking
 Linux-based operating system
 Real-time display
 1080p HDMI socket
 Recording speed up to 25 FPS per channel
 H.264 compression
 Recording resolution: 960 x 576, 720 x 576, 720 x 288, 360 x 288
 Advanced schedule recording & motion detection functions
 Audio recording
 Supports 1 SATA HDD
 S.M.A.R.T function
 Backup onto USB Flash Memory through USB port & via the network
 Backup as *.AVI files
 Advanced search of recorded images (by time or event)
 Networking (live monitoring, playback, archiving & alarm event e-mail notification, changing
DVR’s settings via the IE web browser)
 Dual stream; two independent network streams (SUBSTREAM and MASTERSTREAM) for
each channel
 Software: CMS application for remote administration, live monitoring and recorded data search,
NMS for live monitoring ,recorded data search and integration with NOVUS IP cameras.
B-Viewer application for remote administration, live monitoring and recorded data search.
 User friendly, multi-lingual graphical user interface
 Mobile platforms supported
 Mask function
 Event log
 Snapshot function exporting current frame to the .jpg file
 Supports settings import/export
 IP addresses filtering function
 PC mouse control (in-set included)
 12 VDC (100 ~ 240 VAC/12 VDC PSU in-set included)
FOREWORD INFORMATION

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
7
1.2. NDR-BA3104-II recorder technical data
FOREWORD INFORMATION
Model NDR-BA3104-II
Operation Mode Quadrupleks
Operating
System Linux
Video Input 4 x BNC
Video Output Main (split screen, full screen, sequence): 1 x BNC, 1 x VGA, 1 x HDMI
Audio Input 1
Audio output 1
Recording speed Up to 100 fps (960 x 576)
Compression H.264
Recording
Resolution 360 x 288, 720 x 288, 960 x 576
Recording Mode Time-lapse, Motion detection, Schedule
Display Speed Up to 100 fps (real time)
Display Screen 1, 4, sequence, digital zoom of a selected screen area: 4x
Motion Detection 22 x 15 grid, with sensitivity defined individually for each channel
Video Loss
Detection Yes
Schedule
Recording Individual settings for: each day, each camera, possibility of combining individual recording modes
Recorded Data
Search By date/time, events (Motion detection)
Event History
Log Yes
Time
Synchronization Automatic time synchronization with NTP server
HDD Supports 1 HDD SATA
Backup HDD or USB Flash Memory through USB port, through the network
External Ports 1 x Ethernet - RJ-45 interface, 10/100 Mbit/s, 2 x USB 2.0 - for Flash Memory and PC mouse,
Control USB PC mouse (included) , IR remote control, Network
Menu Multi-lingual On Screen Display (OSD)
Software CMS, B-viewer, Internet Explorer, Super Live Pro (iPhone, Android, BlackBerry),
Pocket Camera (Windows Mobile, Symbian)
User
Authorization Creation of user accounts with varying privileges, password protection
Power Supply 12 VDC (100~240 VAC/12 VDC PSU in-set included)
Power
Consumption max. 25 W with HDD
Operating
Temperature 0°C ~ 50°C
Relative
Humidity 10% ~ 90% (non-condensing)
Dimensions
(mm) 255 (W) x 50 (H) x 210 (D)
Weight 1 kg (without HDD)

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
8
1.3. Package contents
Unpack the device carefully. After unpacking, please ensure that package contains the following items:
If any of the elements has been damaged during transport, pack all the elements back into the original
packaging and contact your supplier.
WARNING!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning on the device immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
NDR-BA3104-II DVR
Mouse
Short user’s
manual
Power supply
12VDC
Power cord
Screws
FOREWORD INFORMATION
HDD SATA
cable
CD with a full version of user’s
manual and software tools

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
9
2. STARTING THE DEVICE
2.1. Electrical connection and other rear panel elements of NDR-BA3104-II DVR
1. AUDIO IN: Audio (mono) input for connecting microphones with pre-amplifiers
2. VIDEO IN: 4 video inputs for connecting video signal sources to the DVR.
3. AUDIO OUT: Audio out port for connecting local speaker with pre-amplifier.
4. VIDEO OUT: Main monitor connector BNC.
5. VGA: Main monitor connector, VGA type. Please use signal cable provided with
the monitor when using aforementioned connection type.
6. HDMI MONITOR: Main monitor connector, use the HDMI cable with a 1080p 60Hz
(1920x1080) monitor.
7. LAN: RJ-45 connector port for connecting to the local network and internet.
8. USB: USB 2.0 ports for external Flash memory and mouse connection.
9. DC12V: 12V DC power socket for connecting included power adaptor.
Note:
OSD menu will be displayed on the VGA monitor by default. To switch the OSD display from VGA to
BNC, please press and hold the Fn button for 5sec.
STARTING THE DEVICE
9
8
7
6
5
4321

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
10
2.2. HDD mounting
NDR-BA3104-II supports up to 1 internal SATA HDD.
WARNING!
In order to find information regarding the compatible models of HDDs and their maximum
capacities, please contact Novus distributor or check the information presented at
www.novuscctv.com. AAT HOLDING Company is not responsible for any problems resulting
from using not recommended hard drives.
The list of compatible HDDs contains all the HDDs that can be used with a given DVR including
HDDs designed for office use - so called desktop disks. However, due to the fact that reliability of
the recording process and data safety are paramount factors of any CCTV system, we strongly
advise to use HDDs designed for continuous (24/7) operation.
In order to mount HDD, please unscrew the screws as depicted below, then please remove the DVR's
cover first by sliding into the rear-end and then lifting it.
WARNING!
Prior to removing cover of the DVR please unplug the power cord first! If the NVR is powered
up, please shutdown the DVR's system using LOGOUT & SHUTDOWN menu, prior to
unplugging the power.
STARTING THE DEVICE

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
11
After removing top cover of the DVR, please mount the HDD to the DVR bottom using included
screws (4 pieces for each HDD), and connect power and signal cables.
NDR-BA3104-II
After connecting an HDD(s), please put the top cover onto the DVR and turn the device on in order to
check the operation of particular components and to format the HDDs.
WARNING!
You need to format disks if they were used in a different device. All data saved on HDD prior to
format will be lost. Mounted HDDs should be the same model.
STARTING THE DEVICE

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
12
Recording capacity calculate table:
“Total Recording capacity” = “Used space per hour (MB/h)” × “recording time” × “channel numbers”
For instance: computing space for 4 x cameras that are to record in WD1 with Lowest video quality, 25
fps framerate and 30-day recording capacity requires the calculation below:
Total Recoding capacity=338(MB/h) X 24(hours/day) X30(days) X4(channels)=973440(MB) ~950
(GB)
2.3. Turning on the power
Connect power cord to the DVR to start the unit. Initialization lasts for approximately 60 seconds.
During this time executing any device functions and pressing any buttons is prohibited. To shut the
device down please use its menu.
Note:
OSD menu will be displayed on the VGA monitor default. To switch the OSD display from BNC to
VGA, please press and hold the Fn button.
STARTING THE DEVICE

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
13
3. RECORDER’S OPERATION
3.1. Front panel description
1. LED: LEDs indicating DVR’s status:
- Power - power supply indicator - Net - network operation
- REC - recording
2. IR DETECTOR IR remote controller receiver. Do not cover.
3 Fn BUTTON Holding the Fn switches OSD menu displaying between VGA and BNC
outputs.
4. USB: USB 2.0 ports for external Flash memory and mouse connection.
3.2. Controlling via USB mouse
DVR features the possibility of controlling the DVR using an USB mouse connected to the USB port.
Functions described below are available in „live” mode.
Double-clicking on any camera in 2x2 and similar display modes switches the display to full-screen
mode. Subsequent double-click returns to previous display mode.
During configuration, selection of particular options is performed via the left mouse button.
Depending on DVR operating mode, pressing right mouse button hides current menu or returns to
previous menu.
3.3. Controlling via IR remote controller
For NDR-BA3104-II DVR NV-RCDVRB-II remote controller can be bought separately. Range is
dependent on the battery level and varies from a few to a few tens of meters.
RECORDER’S OPERATION
2
1 3
4

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
14
NV-RCDVRB-II remote controller can be bought separately as accessory for
NDR-BA3104-II DVR
Remote controller ID is fixed to 0.
Description of IR remote controller function:
RECORDER’S OPERATION
REC Enable manual records
SEARCH Starts search
MENU DVR menu
EXIT Exit current interface
ENTER Confirm the choise or setup
◄►▲▼ Navigates around the DVR menu
ZOOM Digital zoom of image
PIP Starts picture in picture mode
Play/Pause/Stop/Previous
Section/Next Section/Rewind/Fast For-
ward
MULTI Changes display mode.
NEXT Swith to next split screen mode
SEQ Starts sequence display
INFO Displays information menu

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
15
4. RECORDER’S MENU
DVR features multi-layered, on-screen displayed menu used for setting the device up.
Multi-lingual OSD is displayed using one of the following languages: English, Polish, Spanish,
Slovak, Czech, Turkish, Dutch, Russian, Italian, French, Greek and other.
In order to access the DVR settings menu please select MENU from additional menu called by
pressing the right mouse button or press the MENU button in IR remote controller
4.1. Startup wizard
Prior to using DVR for the first time, initial setup is strongly advised. That includes setting parameters
such as time and date, language version, camera, audio, remote control, record mode, network and
password.
A wizard is displayed after device start-up, in order to facilitate setup:
Navigate around the menu using USB mouse or arrow buttons from IR remote controller .
To confirm your choice, to enter sub-menus and edit value fields use ENTER button or left mouse
click.
To leave setup mode or to leave sub-menus/value editing use the EXIT button or right mouse click.
Click the Exit button to escape from a start up menu wizard. Go to MAIN MENU / SETUP / BASIC /
SYSTEM menu and check off Startup Wizard if you don't want to show the wizard menu next time
system is loaded.
Setting Device, Language, Date time format, Time Zone and Date and Time other settings. Click Next
button to display the next setup window.
RECORDER’S MENU

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
16
This window allows user to configure network settings such as; HTTP Port, Server Port, IP Address,
Subnet Mask, Gateway, Preferred and Alternate DDNS Server. Alternatively, select the Obtain an IP
address automatically to get address from DHCP Server.
Click the Next button to display next setup window, depicted below:
In this window you can setup recording Resolution for all channels ( WD1 / D1 / CIF resolutions are
available), recording speed (FPS) and Quality for each channel separately.
Remaining FPS displayed below informs about available framerate.
After setup, click the NEXT button to go to next setup window.
RECORDER’S MENU

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
17
For proper recorder operation, please format the installed HDD using this window.
Additional information like HDD Size, Free space etc. are also available here.
When HDD formatting is complete, click the Finish button to end setup wizard and open the LOGIN
window.
4.2. Menu operating
To navigate or access DVR menus, you should log in first. The Login screen, depicted below,
appears:
Type in the username and password by using the virtual keyboard, then confirm it with LOGIN button.
Default password of admin account is 123456. For safety reasons, it is recommended to change
default user name and password.
Press the Cancel button to exit the LOGIN window. Cameras are then displayed on the screen but no
access to the DVR setup menu is given.
RECORDER’S MENU

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
18
To disable LOGIN window display during next start-up, please go to the MAIN MENU / BASIC /
SYSTEM and check off the Password Check.
To prevent unauthorized access, it is recommended to log out when you leave the screen. In the
monitoring screen, click MENU in the bottom left corner and select LOG OFF.
To shutdown DVR you should click MENU in the bottom left corner of the screen and press
SHUTDOWN.
Detailed information about configuration of recorders available in full version of user's manual
located on the attached CD-ROM and at the www.novuscctv.com website
Note:
If you turn off the system in an abnormal manner such as removing the power cord while the system
is in operation, the disk may acquire or increase the numbers of bad sectors, causing data loss and
shortened life cycle of the disk.
4.3. Live monitoring
After successful initialization, live camera pictures are displayed on the monitor. Displaying all
cameras simultaneously is the default mode. Press left mouse button on the camera to display a
particular camera full screen.
Split-screen images may be freely adjusted. Each camera may be displayed only once in the split-
screen mode.
Camera positions on the screen may be adjusted freely, by using OSD menu or by dragging &
dropping using the mouse.
RECORDER’S MENU

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
19
In order to display the OSD auxiliary menu, please click the right mouse button anywhere on screen or
press MENU/ESC buttons on remote controller. The menu is depicted below:
1. Enters MAIN MENU of the DVR.
2. Selects display mode.
3. Displays cameras in sequence.
4. Adjusts brightness, color, hue and contrast of the camera.
5. Turns on digital zoom mode (up to 4x).
6. Selects audio channel for listening and adjusts volume.
7. Start/stop the manual (panic) recording.
8. Starts the quick playback.
9. Allows to move menu to any part of the screen.
Left mouse button confirms selection, enters sub-menus and text fields.
Right mouse button leaves the menu or moves to a higher level menu.
4.3.1. Sequence
Sequence display is enabled by pressing the SEQUENCE button available from the auxiliary menu.
Selecting split-screen or a full screen, as well as pressing SEQUENCE again will end displaying
sequence. You can set sequence intervals in the DVR menu.
Note:
Default display in sequence is 4 split-screen display (depending on the model). To change sequence
on main monitor to the different split screen mode, please change the settings in MAIN MENU >
SETUP > LIVE > MAIN MONITOR.
4.3.2. Camera adjustment
Camera adjustment tool allows to adjust brightness, contrast, saturation and hue for each camera or for
all camera simultaneously.
Note:
Camera adjustment tool affects appearance of the image in records, please use it carefully.
RECORDER’S MENU
1
2 3 4 5 6
7
8
9

NDR-BA3104-II
User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
20
4.3.3. Zoom function
Zoom allows to enlarge a particular video feed for closer inspection. Selected picture is then enlarged.
Zoom area may be moved around using mouse. Clicking right mouse button or pressing the ESC on
the remote controller exits the zoom mode.
Note:
Zoom function can be used only in full screen mode. Select a specific camera to enlarge the picture.
4.4. Searching video
To search the video material please click the SEARCH button on the remote controller or select
appropriate position from MAIN MENU. Next, a search menu is displayed on the screen, as depicted
below:
Days of the month marked with a blue frame indicating available recordings exist for them. Hours
containing recordings are marked light blue.
To find the recordings:
 Select TIME SEARCH from the SEARCH menu
 Select a day from calendar and desired cameras
 Press the SEARCH button.
 From the given time bar select a specific hour or enter a desired hour, minute and second in the
text field above the time bar.
 Press PLAYBACK button to watch the stored video.
Note: If no recordings exist for the selected timeframe, an appropriate message will be displayed
instead.
RECORDER’S MENU