NRS Healthcare Mowbray Lite M66613 User manual

General Safety Warning
Please ensure these instructions
are fully read and implemented.
Failure to do so may result in
injury to the user. Retain in a safe
place for future reference.
Intended Purpose
The Mowbray Lite toilet frame and
seat range is designed to assist
those who have difficulty in lowering
onto or rising from a standard toilet.
The plastic moulded seat offers
support in a natural position and the
frame is height and width*
adjustable.
(*Only available with M66613 –
Mowbray Lite Flat Pack)
Maximum User Weight
30st
190kg
User Instructions
www.nrs
-
uk.co.uk
Mowbray Lite Toilet Frame &Seat Range
M66613 - Mowbray Lite - Flat Pack
M66625 - Mowbray Lite - Assembled
M82138 - Mowbray Lite Wide Toilet Frame & Seat
Unpackin
g
·Remove all items from the
packaging.
·Check all component parts are
present (see contents list
overleaf)
·Check for any sign of damage.
·If you see any damage, or
suspect a fault, do not
assemble the product; contact
your supplier immediately.
UI/M66613/M66625/M82138/0113/Iss2a
NRS
Healthcare
Cartwright Way,
Forest Business Park,
Bardon Hill,
Coalville,
Leicestershire. LE67 1UF.
Tel: [phone]
Int’l: [phone]
Fax: [phone]
Email: [e-mail]
www.nrs
-
uk.co.uk
Spares
& Accessories
Mowbray Lite Range
F11572: Floor Fixing Kit
F17938: Ferrule
M66820: Toilet Seat
To order please contact NRS
Customer Services.
These products are from a range of
over 3000 daily living aids available
from NRS Healthcare.
To view the full range visit
www.nrs-uk.co.uk or request a
catalogue from NRS Customer
Services

Note: M66625 & M82138 are
delivered assembled
Safety Precautions
Please ensure the user does not
exceed the maximum user weight
190kg (30 stones).
Fitting Instructions
1 - Mowbray Lite Flat Pack only:
Assemble the frame sides to the
centre bars, slide until the desired
width is achieved, align the holes
and secure using the four E clips
provided. Please ensure the
equivalent holes are used on each
side of the frame to ensure it
remains square.
2 - All Models: Remove the
moulded seat from its polythene
bag and snap into place on the
centre bars of the frame.
3 - Ensure the seat is firmly in place
and secure at both back and front.
4 - Adjust to the required height by
removing each ‘E’clip in turn.
5 - Slide each leg up or down to the
required height. Align the holes in
and replace ‘E’clip.
6 - Ensure that all leg extensions
are set at the same height to
prevent rocking.
7 - Place the Mowbray over the
toilet with the cutaway of the seat at
the front and the integral splash
guard placed centrally over the
toilet bowl.
8 - When not in use Mowbray’s can
be stacked with the seat in situ. It is
recommended that no more than
five frames are stacked together for
long term storage
Fitting Instructions Floor Fixing Kit
(If a permanent fix is required a
Floor Fixing Kit is available as an
accessory –see details on the last
page.
Contents M66613 Flat Pack
Description Qty.
Toilet seat 1
Frame Side LH 1
Frame Side RH 1
Frame Centre bar 2
Leg assembly 4
E-clips 8
Diagram 1
Floor
Fixing Leg
Fixing Screws
(Not Included)
E Clip
Location Hole
Fitting Instructions Floor Fixing Kit
1. Adjust frame to desired height.
Please Note: Height adjustment
is not possible once the legs
have been secured to the floor
2. A total of 12 screws must be
used to fix the frame to the floor,
using fixing methods
appropriate to the floor’s
construction. As shown in
diagram 1
Care and Use
1. The seat may be removed from
the frame and autoclaved on
cycles up to 70ºC.
2. The frame may be cleaned using
a non-abrasive cream cleaner or
detergent solution.
3. Check the ferrules on the
freestanding versions monthly for
signs of wear.
4. Check floor fixing screws weekly.
5. Check E clips every 2 months.
A
–
Width (Overall
)
M66625
520mm (20½")
M82138 620mm (24½")
B–Depth Max. Leg Extension 565mm (22")
Depth Min. Leg Extension 515mm (20")
C–Height Max. Leg Extension 550mm (21½")
Height Min. Leg Extension 400mm (153⁄4")
D–Width inside arms M66625 450mm (173⁄4")
M82138 550mm (213⁄4")
E–Seat Width 406mm (16")
F–Seat Depth 450mm (173⁄4")
NOTE: M66613 Mowbray Flat Pack
Dimensions are as above, except:
A–Width (Overall) 570 (22½") min, 720mm (281⁄4")max
D–Width inside arms: 510 (20") min, 660mm (26") max
Diagram 2
A
B
C
D
E
F
•
•
•
•
•
•
•
•
•
•