NRS Relief HuggyPRO 72 m2 User manual

For more info,
visit our website: www.nrsrelief.com
Tent assembly Manual Multi-purpose tent
HuggyPRO 72 m²
Packing list
12 x Horizontal connecting poles
21 x Roof joints, tent
size specic
a
18 x Roof poles
b
14 x Standing poles
c
d
6x Pole extensions
e
2x Gable end covers
f
1x Roof cover, tent size specic
g
1x Ground sheet, tent size specic
h
28 x V-pegs 50 cm
i
12 x J-pegs 30 cm
j
1 x Manual
l
1x Hammer
m
14 x Guy ropes with
shock absorbers
k

HuggyPRO 72 m²
For more info,
visit our website: www.nrsrelief.com
Lay out the frame components as shown
in the drawing.
1
Assemble one side of the roof frame.
3
Pull the roof cover over the roof frame
6
Assemble the other side of the roof frame.
4
Attach the roof cover to the roof frame
with the black Velcro straps.
7
Assemble the ridge bar.
2
Attach the front and back gable covers
to the roof frame. Use the black velcro
straps, starting from the apex.
5
Insert the roof extension poles
8
Seal the cover overlaps in the corners and
at the apex with Velcro and close the cus
10
Lift one side of the tent and slot the wall
poles into the roof joints. Note: the big
hole in the base plate should be facing
outwards.
11
Secure the roof extension poles by using
the Velcro straps
9
Main tent
Connect the horizontal bottom pipes to
the wall pipes. Note: twist to lock in place.
12

HuggyPRO 72 m²
For more info,
visit our website: www.nrsrelief.com
Finish xing gable covers to wall poles.
Fix the straps with hook at the bottom
corners to the wall pipes, then complete
the Velcro straps.
16
Pull down the side walls of the roof cover.
14
Roll out the groundsheet
1
Use the hooks to attach to the bottom
pipes and tighten
15
Repeat points 12 and 13 on the other side
of the tent
13
Fix the cover ap to the gable covers
using the toggles
17
Ground sheet
IMPORTANT: Attach the guy lines and
anchor with V-pegs
19
IMPORTANT: Anchor the base plates with
V-pegs
18
Starting from one doorway, x the
groundsheet to the side walls by xing the
toggles to the rings.
2