NSD PB-188A User manual

Madein Taiwan
NSDGyroscopic
Hand, Wrist, and
Forearm Exerciser
user manual
PB-188A
PB-188AC
NSDGyroscopic
Hand, Wrist, and
Forearm Exerciser
user manual
PB-188A
PB-188AC
NanoSecond Technology
Taiwan Patent No.: 135058
U.S.A.Patent No.: 5800311
Germany Patent No.: 20201408.8
and other patents.
1.
2.
NSD®PB-188A/PB-188AC Gyroscopic Exerciser
Wind-up the Spinner by
turning the rotor in the
direction of the arrow.
Alternate the left and right
thumb as shown below. The
rotor should be fully wound
within 10-15 steps
Hold the Spinner in one hand
with thumb firmly pressed on the
rotor. Release thumb to release the
rotor. Rotor should now spin at a
moderate speed
3.
Rotate your wrist in a
circular motion to speed up
the gyroscopic rotor
•Auto start With Internal Pre-
Tensioner, Just Roll Back The
Rotor In The Direction Of The
Arrow, Then Release And Enjoy!
•Patented design with soft
ergonomic grip
•Computer balanced inner rotor for
VIBRATION FREE operation at
up to 15,000 RPM
•Hard, impact resistant plastic shell
that comes in black
•Small, compact exercise machine
you can take ANYWHERE.
Below are a few tips to help you operate the exerciser:
•The faster the rotor spins, the easier it is to operate. Make sure you
wind up the Spinner with sufficient tension
•Start your wrist rotation slowly, in a motion similar to opening
that of a door knob
•When you’ve matched the rhythm of the rotor’s gyration, you’ll
see the rotor orbit once around its track for every single rotation of
your wrist
•Once the rotor is spinning up to speed, be sure to keep a tight grip
on the ergonomic grip
•Do not drop the ball
•Please keep the interior of the sphere clean and away from liquid
and grease
•DO NOT TOUCH THE INNER ROTOR WHEN OPERATING!

45 12345
12345 30
12345
NSD Patents
NanoSecond Technology owns multiple patents in countries as listed.
We will aggressively pursue and protect our intellectual property
rights.
Australia
No. 2004100675
No. 2008100053
No. 2007100698
No. 2005100371
No. 2006100976
No. 2007100698
France
No. 2873301
No. 2897271
No. 2909890
No. 2897270
No. 2912924
No. 2904230
Germany
Nr.20215476.9
Nr.20212121.6
Nr.202005017793.8
Nr.20311474.4
Nr.20320189.2
Nr.202006014737.3
Nr.20319784.4
Nr.202004017469.3
Nr.202007010179.1
Nr.20201408.8
Nr.202004016651.8
Japan
No.3146882
No.3118250
No.3127440
No.3106852
No.3127943
Korea
No.373474
No.405233
No.433558
Netherlands
No.1027458
No.1030116
No.1033500
No.1026674
No.1033359
No.1033367
No.1030115
Russia
No.71795
South Africa
No.2007/06366
Taiwan
No. 135058
No. M 240246
No. M 289072
No. 143917
No. M 240250
No. M 294341
No. 192202
No. M 240251
No. M 308777
No. 210444
No. M 242242
No. M 350393
No. M 244112
No. M 259618
USA
No.7,033,304
No.7,101,315
No.7,318,790
No.7,086,990
No.7,452,307
No.7,381,115
No.6,623,405
No.7,077,786
No.5,800,311
No.6,942,601
China
No. 02253289.7
No. 02285307.3
No. 200520027599.4
No. 3258043.6
No. 200320112335.X
No. 200520130995.X
No. 200320112334.5
No. 200320112356.1
No. 200620027443.0
No. 02233006.2
No. 200420029473.6
COPYRIGHT 2013 NANO-SECOND TECHNOLOGY CO., LTD
Top Speed Counter
The top speed counter displays
the historical highest speed
achieved in RPM. For example,
when the display shows “12345,”
it means the highest speed so far
is 12,345 RPM. When the display
shows a flashing “ ” with a flashing
score, it means a NEW top speed has
been achieved.
Press the “FCN” button to cycle through the display until the above
symbol appears. Press the “ON/CLR” button once to clear the top
speed for current session ( ), press the “ON/CLR” button again to
reset the historical top speed counter.
Physical Strenth Index Counter
The physical strength index
counter displays the numbers of
revolutions within a 30, 60, or
90 seconds interval. For example,
when the display shows “30,”, it
will start counting down from 30
seconds and total the number of revs
within that time interval, then at the end of
the 30 second interval the number of revolutions
will display.
Press the “FCN” button to cycle through the display until the above
symbol appears. Press the “ON/CLR” button while the rotor is
stationary to cycle through the 3 different intervals, between 30
seconds, 60 seconds, and 90 seconds. Start the rotor of the
gyroscope and the countdown will begin as the symbol flashes.
Press “ON/CLR” again to reset the counter.
Revolutions Counter Speed Counter
The revolutions counter displays
total number of revs in multiples
of 100s. For example, when the
display shows “45,” it means a
total of 4,5XX revolutions has been
counted so far.
Press the “FCN” button to cycle
through the display until the above
symbol appears, then press the “ON/CLR”
button to reset the counter.
Please note, when speed reaches in excess of
18,000 RPM, the revolution counter will stop counting.
The speed counter displays
current speed of the rotor in
Revolutions Per Minute, or RPM.
For example, when the display
shows “12345”, it means the current
speed of the spinning rotor is
12,345 RPM.
Press the “FCN” button to cycle through
the display until the above symbol appears.
NSD®Gyroscopic Exerciser with Digital Counter
NSD’s exerciser equipped with Performance Digital LCD
counter displays various vital workout
information, including numbers of
revolutions in multiples of 100s, current
speed in RPM, top speed in RPM, and
a physical strength index that counts
the total number of revolutions in 3
different intervals.
It is a fun way to keep track of your
workout, or challenge yourself and
your friends to a game of who can
spin the gyroscope the fastest.
Digital LCD Display:
•current total revolutions
•speed in RPM
•historical top speed
in RPM
•NEW historical top speed
•physical strength index
Function Button:
•cycles through the
different functions of the
digital display
On/Clear Button:
•press to turn on the
digital display
•press again to reset the
function displayed, or
cycle through options