Nuheara IQBUDS User manual

L
IQbudsTM - Left and Right
Charging/carrying case
USB cord
Ear tips
IN THE BOX:
QUICK START GUIDE
Let’s get started!
Don’t miss
important updates!
Register your
IQbudsTM through
the app.

CHARGING
STEP 1
There are two devices to be charged - the
charging case and the earbuds.
Place your earbuds in the case, ensuring the gold
contacts are touching the pins, and close the case
to begin charging.
Two red lights on the case will illuminate for a few
seconds to confirm the earbuds are charging.
STEP 2
Connect the case to a USB power source (e.g. to a
computer or a charging plug) to charge both the
case and the earbuds.
To fully charge case and earbuds for first
use
4 hours
To fully charge case 2.5 hours
To fully charge earbuds from case without
USB power souce
1.5 hours

CHARGING INDICATORS
There are two devices to be charged - the
charging case and the earbuds.
When your earbuds are in the case and
you close the lid, the indicator lights will
display the charging status of the earbuds,
as shown above.
If you missed it, press the front button for
less than 2 seconds (‘short press’) to dis-
play the earbud charging status again.
Earbuds
When the case is empty and you open it,
the indicator lights will show the charging
status of the case, as shown above.
When your earbuds are in the case with
the lid closed, you can see the charging
status of the case by pressing the button
for more than 2 seconds (‘long press’).
Charging case
Front
button
IQbuds
TM
charging
in progress
IQbuds
TM
fully charged
IQbuds
TM
fully charged
75%
50%
25%

FIT
STEP 1
Gently push the rubber ear tips onto
the earbuds as shown. Try the dierent
sizes and shapes of ear tips to get the
best fit.
STEP 2
Insert the earbud into your ear with
the tip pointing down.
Rotate the earbud toward the back of
your head. It should be seated snugly
within the ear at a slight backwards
angle.
STEP 3
Ear tips should provide a sound-proof seal in the
ear without being uncomfortably tight.


GET THE APP
STEP 1
Remove your IQbuds from the
charging case.
STEP 2
Insert your IQbuds in your ears.
STEP 3
Press and hold the tap-touch sensor
(either L or R) for 5 seconds (‘very long
tap’). The announcer will say ‘Pairing’.
When they have paired with your
mobile device, the announcer will say
‘Connected’.
STEP 4
Open the app and follow the tutorials
to adjust your earbuds to suit your
hearing levels and your environment.
You can check if your earbuds are
connected by viewing the Bluetooth
settings on your mobile device.

PAIR WITH YOUR DEVICE

CONTROLS
LEFT
RIGHT
Left tap-touch sensor
Right tap-touch sensor
Ta p
Double-
tap
Long tap
5s Very long tap
Music Phone call
Play/pause Answer call / Mute call
Aativate Siri/
Google Now
Reject/ hang up
Activate Pairing
mode
Ta p
Double- tap
Long tap
5s Very long tap
Environment
Toggle SINC on/o
Activate Siri/Google Now
Switch between favourite locations
Activate Pairing mode
©2018 Nuheara Inc. All rights reserved. Nuheara, IQbudsTM and SINCTM Technology are trademarks of Nuheara Inc.
TECHNICAL SUPPORT
Register you IQbudsTM and use
the app to contact technical
support.
FULL MANUAL & ONLINE SUPPORT
visit www.nuheara.com/support
to view help documents, explainer
videos and FAQs.