Nuheara IQBUDS User manual

Don’t Miss Important Updates!
Register Your IQbuds
Through the App
I N T H E B O X
IQbuds – Left & Right
Charging/Carrying Case
TM

Ear Tips
USB Cord
CHARGE
STEP 1
Place earbuds in case.
NOTE: The left and right earbuds can go in either slot in the charger
STEP 2

Close the case lid to charge IQbuds. Connect the case to a USB power source to charge case and buds. Time
to fully charge earbuds: 1.5 hours. Time to fully charge case: 2.5 hours.
C H A R G E I N D I C A T O R S
Earbuds
When you close the lid, the earbud charge status displays for 5 seconds then switches off. Pressing the front
button for 2 sconds (“short press”) displays the earbud charge status for another 5 seconds. Opening the lid
displays the earbud charge status on the inner LEDs for 5 seconds. Red lights indicate charge in progress. Two
green lights mean they are fully charged.

Charging Case
With the lid closed and pressing the front button for longer than 2 seconds (“long press”) displays the main
battery charge status on the front LEDs for 5 seconds. 4 green lights means the case is fully charged.
NOTE: “Short press” displays earbud charging status, “long press” displays case charing status.
F I T
STEP 1
Try different sizes to get the best fit. The ear tip should seal the ear to deliver the best music quality and noise
reduction.
STEP 2
Insert bud with tip down.
STEP 3
Rotate bud toward the back of your head. Bud should be seated snugly within the ear at a slight angle.

P A I R W I T H Y O U R D E V I C E
STEP 1
Remove IQbuds from charge case.
STEP 2
Put on IQbuds.
STEP 3
Press and hold tap-touch sensor for 5 seconds. IQbuds will play a notification sound.
STEP 4
You can now pair with your device.
C O N T R O L S
LEFT
MUSIC PHONE CALL
Tap Play/pause Answer Call
Double Tap Activate Siri / Google Now
Long Tap Reject / Hang up Call
5s Very Long Tap Activate Pairing Mode
RIGHT