NUTRIBULLET FRESH User manual

User guide.
®
FRESH

32
Thank you for purchasing your nutribullet®Fresh blender,
the next step to healthy & delicious nutrition.
GENERAL SAFETY
• A nutribullet®is not a toy.
•This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety.
•Children should be supervised to
ensure that they do not play with
the appliance.
•Switch o the appliance and
disconnect from supply before
changing accessories or
approaching parts that move in use.
 NEVER LEAVE THE NUTRIBULLET®
UNATTENDED WHILE IT IS IN USE
 ALWAYS UNPLUG THE NUTRIBULLET®
WHEN NOT IN USE
• Only use your nutribullet®for its
intended use.
• Do not use outdoors.
HEAT & PRESSURE SAFETY
To avoid personal injury, NEVER blend
hot ingredients! Heated ingredients
can cause pressure to build up, causing
possible expulsion which may lead to
personal injury or property damage.
Always start with room temperature or
cooler ingredients (< 21°C).
Important safeguards.
Warning! To avoid the risk of serious injury, carefully read all instructions
before operating your NutriBullet®.
• To prevent overheating and pressure
build up, never allow the nutribullet®
to run more than one minute at a
time. If you feel the need to blend
for longer than 1 minute, allow the
motor base to shut o completely
and wait for at least one minute
before starting a new 1-minute
cycle. Do not run for more than
3 consecutive 1-minute intervals
to prevent the contents from
overheating.
• NEVER blend carbonated liquids or
eervescing ingredients (e.g., baking
soda, baking powder, yeast, cake
batter, etc.). Built-up pressure from
released gases can cause the cup to
burst resulting in possible personal
injury or property damage.
• If the cup is warm to touch allow it
to cool completely before carefully
opening, pointed away from your
body to avoid injury.
• After blending, allow the contents
to settle and release any pressure
that may have built up during
the extraction process by slowly
unscrewing the cup|blade assembly.
Always point the cup away from
your body when you open it!
• Do not allow blended mixtures to sit
in a sealed cup for long periods of
time. Sugar in fruits and vegetables
can ferment, causing pressure to
build up and expand in the cup. This
can cause ingredients to burst and
spray out when moved or opened.
!
Contents.
03 Important safeguards
06 Cleaning & maintenance
06 The golden rules
07 What’s included
08 Assembly & use
08 Happy?
Save these instructions!
FOR HOUSEHOLD USE ONLY

54
BLADE SAFETY
BLADES ARE SHARP! HANDLE
CAREFULLY. To avoid laceration injury,
do not handle or touch any blade edge.
• Never store a blade in the motor
base unattached to a nutribullet®
cup. An exposed blade can present
a laceration hazard.
• AVOID CONTACT WITH MOVING
PARTS! To reduce the risk of severe
personal injury, keep hands and
utensils out of and away from the
blade while blending food.
• To prevent leakage and the possible
separation of components during
operation, properly align and
securely attach (hand tighten) the
blade to the nutribullet®cup. Check
for leakage before placing it on the
motor base and operating.
• Once you have finished using your
nutribullet®, wait to remove the
cup|blade assembly from the motor
base until the motor comes to a
complete stop and the unit powers
down completely. Taking the cup
o the unit prior to complete power
down can cause damage to the
blade coupling and/or motor gear.
NEVER BLEND WITHOUT LIQUID AS
DOING SO MAY DAMAGE THE BLADE
OR MOTOR.
• Your nutribullet®blender is not
intended to be used as an ice
crusher or without liquids. Always
add liquid to your recipe.
• CAUTION: Avoid blending pits in the
nutribullet® as these can damage
the blade.
• DO NOT USE the extractor blade
for grinding dry ingredients such
as grains, cereal, or coee, as this
may damage the motor and/or the
blade. For that purpose nutribullet®
milling blades are available via local
points of sale.
CUP SAFETY
To avoid leakage, do not overfill the
cup! Make sure your ingredients and
liquid do not exceed the MAX line as
this can result in leakage and may
create a dangerous pressurization
which can cause the cup|blade
assembly to separate.
• Cups and blades are specific to the
exact model of nutribullet®. Use of
incompatible parts or parts from
other models may result in damage
or create safety hazards.
• Periodically inspect all components
for damage or wear.
• Discontinue use and replace
blending cups if you detect cracking,
cloudiness or any other damage to
the cup, tabs on the cup, or actuator
tabs of the motor base.
ELECTRICAL SAFETY
To avoid the risk of electrical shorting,
fire, electric shock, personal injury or
product damage:
• Do not use your nutribullet®in
locations with dierent electrical
specifications or plug types or with
any type of plug adapter or voltage
converter device.
• Do not modify the plug or motor
base in any way as doing so will void
the product’s warranty.
• Never immerse the cord, plug, or
motor base in water or other liquids
which can conduct an electrical
current.
• Always POWER OFF and UNPLUG
the nutribullet®when it’s not in
use, and BEFORE assembling,
disassembling, changing accessories
and cleaning.
• Periodically inspect the cord, plug
and machine for damage. Do not
operate with a damaged plug or
cord.
• Do not allow the cord to hang over
the edge of a table or counter and
do not allow to touch hot surfaces,
including a stove.
• Do not pull or damage the power cord.
• Cease operation of your nutribullet®
if it has been dropped or damaged,
or if it malfunctions in any manner
(including making a louder-than-
normal or abnormal sound when
blending).
• CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-out,
this appliance must not be supplied
through an external switching
device, such as a timer, or connected
to a circuit that is regularly switched
on and o by the utility.
• If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard.
• If the motor stops working, unplug
the motor base and let it cool for at
least 15 minutes before attempting
to use it again. Your nutribullet®
has an internal thermal breaker
that shuts o the motor when it
overheats. This thermal breaker will
reset when the unit is unplugged,
and the thermal breaker has cooled
down suciently.
VENTILATION SAFETY
The motor base features ventilated
openings on the bottom to ensure
reliable operation and prevent over-
heating.
• To prevent a fire hazard, make
sure that these openings remain
unobstructed by dust, lint, or other
materials.
• Never place your nutribullet® on
top of flammable items such as
newspapers, tablecloths, napkins,
dish towels, place mats or other
similar materials.
CAUTION! Always operate the
nutribullet®on a dry level surface,
leaving unobstructed space beneath
and around the motor base to permit
proper air circulation.
MICROWAVE & STOVETOP
HEATING SAFETY
Do not place the nutribullet® or any
of its parts in a microwave, oven or
stove-top pot or immerse in boiling
water as this may result in damage.
MEDICAL SAFETY
The information contained in this
user guide is not meant to replace
the advice of any physician. Always
consult your physician regarding
health and nutrition concerns.
CAUTION! DO NOT USE the following
seeds and pits as they contain a
chemical known to release cyanide
into the body when ingested: apple
seeds and pits of cherries, plums,
peaches, and apricots.
•

76
Please follow the cleaning
instructions before the first use,
and after each use. Cleaning the
nutribullet®is easy, simply place any
of the pieces (except for the motor
base and blade) on the TOP RACK of
the dishwasher or hand wash with
warm soapy water and rinse.
STEP 1: ALWAYS POWER OFF and
UNPLUG the motor base from the
outlet when cleaning. Do not attempt
to handle the appliance until all
parts have stopped moving!
STEP 2: Remove the cup|blade
assembly from the motor base.
STEP 3: Clean the individual
components as follows:
MOTOR BASE:
Use a sponge or dish cloth dampened
with warm soapy water to wipe down
until clean. If necessary, you may use
a small brush to scrub the actuator
system area to ensure it’s clean. To
avoid risk of injury, NEVER attempt
to clean the actuator system on the
motor base and do not attempt to
remove any pieces. NEVER submerge
the motor base in water.
BLADE:
Wash the blade with warm soapy
water and rinse, preferably
immediately after use in order to
avoid sticking of ingredients. Dry
completely, ensuring BOTH SIDES of
the blade are completely dried before
use. Never remove the gasket as this
will permanently damage the blade
Cleaning &
Maintenance.
The Golden Rules,
10 do’s and don’ts.
What’s included.
and cause leakage. If, over time, the
gasket becomes loose or damaged,
your extractor blade must be
replaced. We recommend replacing
your extractor blade every 6 months
(depending on use) or as needed for
optimal performance as the blade
dulls with use.
NUTRIBULLET®CUPS AND LIDS:
These parts are TOP RACK dishwasher
safe. We recommend rinsing them and
giving them a quick brush to remove
any dried debris before washing
them in the dishwasher. NEVER use
the sanitize cycle as this may warp
the plastic. Regularly check the tabs
on the sides of the cups for damage
(cracking, crazing, breakage or
rounding). If you notice damaged
tabs, discontinue use and replace
immediately to prevent possible
personal injury.actuator
NOTE: Do not attempt to repair or
service this appliance. If any of the
instructions or warnings are not
understood please contact Customer
Service for assistance at info@
freshnewbrands.com.
You may purchase new nutribullet®
cups, blades and accessories at
nutribullet.com.
1. Always blend cold or room
temperature ingredients and
liquids (< 21°C).
2. Always allow the nutribullet®to
run less than 1 minute.
3. Carefully keep the outside and
inside of the blender clean, use a
damp cloth.
4. Take care of the 3 white rubbers
located in the upper part of the
power base.
5. Pay extra attention to the actuator
tabs in the upper edge of the
power base to loosen any sticky
debris from drips and spills. You
may use a damp cotton swab to
ensure these are kept clean.
6. Don’t overfill the cup to avoid
leakage. Stick to the maximum
quantity indicated by the MAX line
on the cup.
7. Always add liquid as one of your
ingredients!
8. Don’t wash the blade in
the dishwasher as elevated
temperatures may warp the
plastic and damage the gasket.
Never remove the gasket.
9. Do not use your nutribullet®,
its parts and accessories in a
microwave or freezer.
10. Replace your blade every 6
months or sooner to maintain
optimal performance. Signals that
it’s about time to buy a new blade:
in case of a bad smell, leakage
of brown or green liquid, louder
noise during blending, when
the gasket comes o the blade,
burning air (may also be novelty
after purchase) or if the machine
does not start (which can also be
caused by sticked activator tabs).
Note: It is quite normal for a brand
new appliance to produce an
unpleasant smell the first few times it
is put to use, we promise it will soon
smell delicious.
Customer Service
If you have any comments, questions,
warranty details, concerns, tips or
ideas: email [e-mail].
!
Motor base 700mL
cup
Extractor
blade
To-go lid Manual
Drink ring

8
1Place motor base on a clean, dry,
level surface such as a counter
top or table.
2Add ingredients and liquid
to the nutribullet® cup. Do
not exceed the MAX line!
NEVER blend hot or
carbonated ingredients.
3Place the blade onto the
cup and twist until tightly
sealed.
4Plug the power cord into
an electrical outlet.
5Turn the cup upside down
and place it onto the
motor base, gently push
and twist.
NOTE: Blending should
not require longer than 1
minute to yield smooth
and creamy results.
6Unlock the assembly
by gently pushing and
untwisting the cup
counterclockwise.
7Rinse the extractor blade in warm
soapy water immediately after
use in. order to avoid sticking of
ingredients.
8Twist a to-go lid or drink ring to the
cup and enjoy your drink!
WARNING: Never submerge the
motor base in water.
Pulse Technique
If you’re looking to prepare foods
with a chunkier texture, like fresh sal-
sa or chopped onions, you should use
this technique. Simply press the cup
down on the power base, then quickly
release. Let the blades come to a
complete stop before pulsing again.
Two to three pulses will generally
yield a coarse, even chop, while more
pulses create a finer texture.
Assembly & use.
Are you happy with your nutribullet®?
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to
the environment or human health from uncontrolled waste disposal; recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and collection systems or contact the retailer where
the product was purchased to taking this product for environmental safe recycling.
!
Share your recipes, posts, tips & tricks!
Like & follow us @nutribullet_sa
Tag your blends #nutribullet
#nutrilovers #healthy #healthylifestyle
#nutribulletimmuneboost
If you have any comments, questions
re. use or warranty, concerns, tips
or ideas please contact info@
freshnewbrands.com.