Nuvico SD-z35 User manual

0 PTZ SPEED DOME CAMERAS

CONTENT VERIFICATION
Before installing the controller, please make sure that the following items are included in
the box:
1. Speed Dome Camera
2. Pendant Housing & Wall Mount
3. Instruction Manual
If any of these materials are missing, please contact the vendor or NUVICO customer
help desk immediately.
1 PTZ SPEED DOME CAMERAS

DISCLAIMER
•While every effort has been made to ensure that the information contained in this
guide is accurate and complete, no liability can be accepted for any errors or
omissions.
•NUVICO reserves the right to change the specifications of the hardware and
software described herein at any time without prior notice.
•No part of this guide may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form, by any means, without
prior written permission of NUVICO.
•NUVICO makes no warranties for damages resulting from corrupted or lost data due
to a mistaken operation or malfunction of the Speed Dome Cameras, peripheral
devices, or unapproved/unsupported devices.
2 PTZ SPEED DOME CAMERAS

3 PTZ SPEED DOME CAMERAS
WARNING AND CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instruction in the literature
WARNIN
G
CAUTION
accompanying the product.

4 PTZ SPEED DOME CAMERAS
FCC COMPLIANCE STATEMENT
FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO
PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN
THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL
AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN
EXPENSE.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL EQUIPMENT COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME
NMB-003 DU CANADA.
CE COMPLIANCE STATEMENT
WARNING
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER
MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

IMPORTANT SAFEGUARDS
1. Read these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this equipment near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or
other equipment (including amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the equipment.
10.Only use attachments/accessories specified by the manufacturer.
11.Unplug this equipment during lightning storms or when unused for long periods of
time.
12.Refer all servicing to qualified service personnel. Servicing is required when the
equipment has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the equipment, the
equipment has been exposed to rain or moisture, does not operate normally, or has
been dropped.
13.CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED
SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE
OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
Use Certified/Listed Class 2 power supply transformer only.
5 PTZ SPEED DOME CAMERAS

TABLE OF CONTENTS
DISCLAIMER..................................................................................................................2
WARNING AND CAUTION.............................................................................................3
FCC COMPLIANCE STATEMENT.................................................................................4
CE COMPLIANCE STATEMENT ...................................................................................4
IMPORTANT SAFEGUARDS.........................................................................................5
I. INTRODUCTION.........................................................................................................8
Features ...................................................................................................................................................8
II. INSTALLATION AND CONFIGURATION..................................................................9
2.1 Typical System Configuration.........................................................................................................9
2.2 Basic Configuration of Speed Dome Camera System ................................................................10
2.3 Connecting the Speed Dome directly into the DVR ....................................................................11
2.4 Connecting the Speed Dome into the Controller via J-box........................................................12
2.5 Connecting Both Speed Dome and DVR via J-box .....................................................................13
2.6 Principle of Termination.................................................................................................................15
2.7 Dome Camera Address (ID) ...........................................................................................................17
2.8 Setting Protocols ............................................................................................................................18
2.9 Connections ....................................................................................................................................19
3.0 Mounting the Dome Camera..........................................................................................................20
3.1 Power on and Boot-up Sequence..................................................................................................21
III. PROGRAM & OPERATION.....................................................................................22
Dome Camera Selection.......................................................................................................................22
3.1 FUNCTIONS .....................................................................................................................................22
3.1.1 HOME FUNCTION (MENU =>FUNCTIONS => HOME FUNCTION) ...............................................................................23
3.1.2 PRESET (MENU => FUNCTIONS => PRESET Shortcut:PRST)......................................................................................24
3.1.3 PATTERN (MENU => FUNCTIONS => PATTERNS or Shortcut: PTRN).........................................................................26
3.1.4 SCAN (MENU => FUNCTIONS => SCAN or Shortcut: SCAN)........................................................................................27
3.1.5 TOUR (or MENU => FUNCTIONS => TOUR, ShortCut: TOUR).....................................................................................29
3.2 ALARM (MENU => ALARM)...........................................................................................................31
3.3 SCREEN ...........................................................................................................................................32
3.3.1 LANGUAGE (MENU => SCREEN => LANGUAGE) ........................................................................................................33
3.3.2 PRIVACY ZONE (MENU => SCREEN => PRIVACY ZONE)...........................................................................................33
3.3.3 NORTH DIRECTION (MENU => SCREEN => NORTH DIRECTION).............................................................................34
3.3.4 ZONE TITLE (MENU => SCREEN => ZONE TITLE) .....................................................................................................34
3.3.5 CAMERA TITLE (MENU => SCREEN => CAMERA TITLE)...........................................................................................35
3.3.6 OSD DISPLAY(MENU => SCREEN => OSD DISPLAY) ................................................................................................35
3.4 CAMERA (MENU => CAMERA).....................................................................................................36
3.4.1 FOCUS CONTROL(MENU => CAMERA => FOCUS CONTROL) ....................................................................................36
3.4.2 WB (white balance) (MENU => CAMERA => WB CONTROL) ........................................................................................37
3.4.3 AE CONTROL (MENU => CAMERA => AE CONTROL) .................................................................................................37
3.4.4 NIGHT SHOT MENU (MENU => CAMERA =>NIGHT SHOT).........................................................................................38
3.4.5 STABILIZER (MENU ÎCAMERA ÎSTABILIZER) .........................................................................................................38
6 PTZ SPEED DOME CAMERAS

3.4.6 SPECIAL (MENU ÎCAMERA ÎSPECIAL) ...................................................................................................................39
3.4.6.1 BACK LIGHT (MENU ÎCAMERA ÎSPECIAL ÎBACK LIGHT)...............................................................................39
3.4.6.2 SHARPENSS (MENU ÎCAMERA ÎSPECIAL ÎSHARPNESS) ...........................................................................39
3.4.6.3 DIGITAL ZOOM (MENU ÎCAMERA ÎSPECIAL ÎDIGITAL ZOOM)......................................................................39
3.4.6.4 PROGRESSIVE (MENU ÎCAMERAÎSPECIALÎPROGRESSIVE MODE) ..............................................................39
3.4.7 CAMERA DEFAULT (MENU => CAMERA =>CAMERA DEFAULT) ...............................................................................39
3.5 SETUP (MENU => SETUP).............................................................................................................40
3.5.1 FLIP (MENU => SETUP => FLIP) ...................................................................................................................................40
3.5.2 SPEED (MENU => SETUP => SPEED)..........................................................................................................................40
3.5.3 PANNING RANGE (MENU => SETUP => PANNING RANGE).......................................................................................40
3.5.4 TILT OVER ANGLE (MENU => SETUP => TILT OVER ANGLE)....................................................................................41
3.5.5 CALIBRATION (MENU => SETUP => CALIBRATION) ...................................................................................................41
3.5.6 LINE LOCK (MENU => SETUP => LINE LOCK)..............................................................................................................42
3.5.7 FACTORY DEFAULT (MENU => SETUP => FACTORY DEFAULT) ..............................................................................42
3.5.8 ERASE DATA (MENU => SETUP => ERASE DATA)......................................................................................................42
3.5.9 SYSTEM INFORMATION (MENU => SETUP => ERASE DATA) ...................................................................................43
Appendix A — Specifications..............................................................................................................44
Appendix B — Troubleshooting ..........................................................................................................46
Glossary.......................................................................................................................47
7 PTZ SPEED DOME CAMERAS

I. INTRODUCTION
Features
The Speed Dome Camera features a high resolution EX-View HAD CCD imager for
enhanced lowlight sensitivity. User friendly, on-screen pull-down menus and short-cuts
make it easy to setup and program functions.
System information aides troubleshooting by displaying the hardware and software
version of the camera’s firmware version, baud rate, and protocol.
•Built-in 35X Optical Power Zoom Camera.
True Night Shot function with ExView HAD ICR Day/Night function.
•64 Presets programmed with view direction, zoom, and BLC.
•1 Patterns record and play back user preference of surveillance path up to 60 sec.
•4 Scans: 8 speed steps from slow to medium panning with smooth DiagonalScan.
•4 Tours: Each tour consists up to 32 Preset, Pattern, and Scan.
Smooth DiagonalScan mode and programmable Individual dwell time camera
functions.
(Speed, Dwell time BLC, Focus, IRIS of the preset)
•4 Alarm inputs with 1~4 priority / 1 Auxiliary outputs programmable NC & NO.
•8 Privacy Zones: Video off or up to 8 masked blocks
•64 steps of variable speed from 0.4°/sec to 90°/sec.
Max manual speed 380°/sec with Turbo key pressed, Preset speed is 380°/sec.
•Programmable user preferences of speed (Slow, Medium, and Fast).
•Addressable up to 99 camera IDs (Extendable up to 3999 in special mode).
•Built-in RS-485 receiver driver.
•On-site software upgrade and upload/download of programmed data into the
KBD/Dome.
•Built-in power-line surge protection and lightning protection.
•Optional Tinted Bubble, Indoor & Outdoor pendant housing with heater & blower,
Indoor Flush Mount, Parapet mount & Roof Top mount.
8 PTZ SPEED DOME CAMERAS

II. INSTALLATION AND CONFIGURATION
2.1 Typical System Configuration
Additional Speed Dome joystick controllers and a variety of external switching devices
such as multiplexers (MUXes) and Digital Video Recorders (DVRs) may be incorporated
to accommodate the needs from a small to a large surveillance/security system.
Figure 1 illustrates sample installation.
Figure 1 - Typical System Configuration
9 PTZ SPEED DOME CAMERAS

10 PTZ SPEED DOME CAMERAS
2.2 Basic Configuration of Speed Dome Camera System
Figure 2 - Basic Installation Diagram
10 PTZ SPEED DOME CAMERAS

2.3 Connecting the Speed Dome directly into the DVR
•Locate the RS485 + & - conductor wire from the Speed Dome Camera.
•Connect the + & - into the Tx+ & Tx- ports of the DVR. Tx+ & Tx- ports can be found in
the rear part of the DVR.
Figure 3 - Camera into DVR
11 PTZ SPEED DOME CAMERAS

2.4 Connecting the Speed Dome into the Controller via J-box
Figure 4 - Camera into Controller
12 PTZ SPEED DOME CAMERAS

2.5 Connecting Both Speed Dome and DVR via J-box
Figure 5 - Connecting Camera & DVR into Controller
13 PTZ SPEED DOME CAMERAS

The dome camera must be installed by qualified service personnel. Before installing the
dome camera system, this instruction manual must be read thoroughly and understood
fully. Dome cameras must be set up properly before starting the installation. This
involves properly setting configuration switches. Figure 6 shows the location of these
switches.
1
2
3
4
56789
0
S2 S1
9
8
7
6
5
432
0
1
S4
S5
Address(ID)
Selection Switches
Selection Switches
Protocol
S1
Selection Switches
Termination,Pull Up/Down
Heater AC 24V~ Comm.(RX/TX) Power AC 24V~ Video
Fan & Heater
S3
0
9
87
6
5
4321
S6
Relay 1 Output
Alarm No.1~4 Input
Alarm No.5~8 Input
Relay 2 Output
Figure 6 - Layout of Switches
14 PTZ SPEED DOME CAMERAS

2.6 Principle of Termination
Every device that is connected at the end of the communication data line must be
terminated by either the DIP switch setting or an appropriate device such as a
termination jumper to prevent potential control signal errors.
See Figure 7 for termination switch settings and Figure 8 for examples of devices
requiring termination. Note: Total length of the cable for communication should not
exceed 1.2Km or .74 mile.
SW2 1 2 3 4
Terminated ON ON X X
Not terminated OFF OFF X X
Pull Up/Down ** X X ON ON
Normal ** X X OFF OFF
Figure 7 - Setting Dome Camera Termination
** Unless communication error, put the position 3, 4 of the S1 in OFF state.
Position 3, 4 should be set as a pair. (Both 3, 4 to ON position or OFF position)
15 PTZ SPEED DOME CAMERAS

Figure 8 - Termination Diagram
16 PTZ SPEED DOME CAMERAS

2.7 Dome Camera Address (ID)
Each dome camera must have a unique address (ID). Identical IDs on the same line
may damage the control circuit caused by an electrical short. When installing multiple
dome cameras or a DVR, it is recommended that the dome camera ID’s be identical to
the camera port of the DVR.
Cam Port 1 = Dome ID1, Cam Port 2 = Dome ID 2 … Cam Port 16 = Dome ID 16.
If more than 16 dome cameras are installed using two or more DVRs the following
formula is useful to determine the Dome ID: ID =16x (n-1) +m (where n= number of
DVR, m=Camera Port)
Refer to Figures 9 for setting the dome camera address (ID) and protocol selection.
DOME ID S3 S2 S1
1 0 0 1
. . . .
999 9 9 9
1
2
3
4
5
6789
0
S2 S1
32
6
5
4
8
79
1
0
..
on
0
9
8
7
6
5
4321
S3
S4
.
on
..
on
S5S6
D1 D4D5 D8D9 D12
Figure 9 - Setting Dome Camera Address (ID) and Protocol
17 PTZ SPEED DOME CAMERAS

2.8 Setting Protocols
A Speed Dome camera is capable of negotiating with multiple protocols if the
communication speed is matched (same baud rate i.e., 9600 bps). See Figure 10 for the
appropriate protocol switch settings.
Note: Consult service personnel if a dome camera is installed with a device other than a
recommended Speed Dome Controller.
DIP S/W FUNCTION VIDEO D1 S5
D1 Video NTSC Off D5 D6 D7 D8
Protocol
D2 Comm. PAL On Off Off Off Off Factory Default
D3 Camera On Off Off Off AUTO(Even Parity)
S4
D4 COMM. D2 Off On Off Off PP
D5 Protocol RS-422 On On On Off Off EZ
D6 RS-485I Off Off Off On Off S2
D7 On Off On Off PD
S5
D8 CAMERA D3 D4 Off On On Off VC
D9 Baud rate SN,HT,HN Off Off On On On Off SN
D10 LG On Off Off Off Off On DC
D11 STW Off On Off On Off On PS
S6
D12 Extended
ID Reserved On On On Off On On VL
Off On On On DI
On On On On Factory Reset
Extended ID D12 S6
1~999 Off D9 D10 D11
Baud rate
1~3999 On Off Off Off 2400 bps
Off Off On 4800 bps
Off On Off 9600 bps
Off On On 19200 bps
On Off Off 38400 bps
Figure 10 - Protocol Selection Tables
18 PTZ SPEED DOME CAMERAS

2.9 Connections
• How to Connect RS485
The dome camera has a built-in RS-485/422 receiver so that it can be
controlled remotely by an external control device such as a joystick controller
or a DVR.
RS-485/422: Connect the TXA (Tx+) and TXB (Tx-) of the RS485/422 control
devices (KBD, DVR…) to RXA(RX+), RXB(RX-) of the dome camera.
RS-485/4222 does not allow for a star connection layout. A splitter is
required if a star connection layout is desired. RS-485 guarantees 1.2 Km of
data line routing. A repeater is recommended to extend over 1.2 Km.
• Connecting Video output
Figure 2 – Basic installation diagram
• Connecting Alarms
AL1 to 8 (Alarm In)
Magnetic, PIR or other external sensor devices can be used to signal the
dome camera reacting to an event.
See Chapter 3.2 — Program and Operation for configuring alarm input.
GND (Ground)
NOTE: All the connectors marked GND are common.
Connect the ground of the Alarm input and/or alarm output to the GND
connector.
NO / NC (Normally Opened or Normally Closed Dry Contact Relay Output)
The dome camera can activate external devices such as buzzers or lights
using dry contact relays. Connect the device to the NO (NC) (Alarm Out) and
COM (Common) connectors. See Chapter 3 — Program and Operation for
configuring alarm output.
• Connecting the Power
Connect AC 24V 40VA power to the dome camera.
Use certified / Listed Class 2 power supply transformer only.
19 PTZ SPEED DOME CAMERAS