Nuvoton Nu-LB-M051 User manual

Nu-LB-M051 User Manual
ARM Cortex™-M0
32-BIT MICROCONTROLLER
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 1 -
Nu-LB-M051 User Manual
For NuMicro™M051 Series
The information described in this document is the exclusive intellectual property of
Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.
Nuvoton is providing this document only for reference purposes of NuMicro™microcontroller based system design. Nuvoton assumes no
responsibility for errors or omissions.
All data and specifications are subject to change without notice.
For additional information or questions, please contact: Nuvoton Technology Corporation.
Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 2 -
1Overview ..................................................................................................... 3
2Nu-LB-M051 Introduction ............................................................................... 3
2.1 Functional Block of Nu -LB-M051 ............................................................................. 4
2.2 Pin Assignment for Extended Connector.................................................................... 5
3How to Start Nu-LB-M051 on the Keil μVision®IDE ............................................ 6
3.1 Keil uVision®IDE Software Download and Install ....................................................... 6
3.2 Nuvoton Nu-Link Driver Download and Install............................................................ 6
3.3 Hardware Setup.................................................................................................... 6
3.4 Smpl_StartKit Example Program ............................................................................. 7
4How to Start Nu-LB-M051 on the IAR Embedded Workbench............................... 8
4.1 IAR Embedded Workbench Software Download and Install .......................................... 8
4.2 Nuvoton Nu-Link Driver Download and Install............................................................ 8
4.3 Hardware Setup.................................................................................................... 8
4.4 Smpl_StartKit Example Program ............................................................................. 9
5Nu-LB-M051 Schematic................................................................................ 10
6Download NuMicro™Family Related Files from Nuvoton Company ...................... 13
6.1 Download NuMicro™Keil μVision®IDE driver ........................................................... 13
6.2 Download NuMicro™IAR EWARM driver .................................................................. 14
6.3 Download NuMicro™M051 series BSP Software Library ............................................. 15
7Revision History.......................................................................................... 16
Downloaded from Arrow.com.Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 3 -
1Overview
Nu-LB-M051 is the specific development tool for NuMicro M051 series. Users can use Nu-LB-M051 to learn easily how
to display information, store date, communicate with PC and interact with human through M051 series. Besides, it also
integrates ICE controller called Nu-Link-Me and users do not need other additional ICE or debug equipments.
2Nu-LB-M051 Introduction
Nu-LB-M051 uses the M0516LAN as the target microcontroller and includes rich functional blocks on board. Figure 2-1
is the positive and negative Nu-LB-M051. The positive Nu-LB-M051 includes main chip (M0516LAN), INT key, reset
key, variable resistance, RGB LED, 8 LEDs, 128x64 Dot Matrix LCD and RS232 interface. The negative Nu-LB-M051
includes EEPROM, Flash and ICE controller called Nu-Link-Me.
Nu-LB-M051 is similar to other development boards. Users can use the functional blocks connected with M0516LAN to
develop and verify applications to emulate the real behavior. The on board chip covers M051 series features. The Nu-LB-
M051 can be a real system controller to design users’ target systems.
Nu-Link-Me is a Debug Adaptor. The Nu-Link-Me Debug Adaptor connects your PC's USB port to your target
system (via Serial Wired Debug Port) and allows you to program and debug embedded programs on the target
hardware. To use Nu-Link-Me Debug adaptor with IAR or Keil, please refer to “Nuvoton NuMicro™IAR ICE driver
user manual “or Nuvoton NuMicro™Keil ICE driver user manual” in detail. These two documents will be stored in the
local hard disk when the user installs each driver.
Figure 2-1 Nu-LB-M051
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 4 -
2.1 Functional Block of Nu -LB-M051
Nu-LB-M051 provides the rich functional blocks connected with M0516LAN to display information,
communicate with PC, store data and interact with human. Users can follow the pin assignment at Table 2-1 to
control every functional block.
Functional Block Pin assignment Pin Function Description
ICE controller(Nu-Link-Me) ICE_CLK
ICE_DATA
SWD interface
Reset Key /RST Reset
INT Key P3.2 INT0
Variable Resistance P1.0 AIN0(ADC input)
Buzzer P4.3 PWM3
GRB LED P4.0
P4.1
P4.2
PWM0
PWM1
PWM2
8 LEDs P2.0~P2.7 GPIO or PWM0~PWM7
EEPROM P3.4
P3.5
I2C SDA
I2C SCL
FLASH P0.4
P0.7
P0.6
P0.5
SPISS1
SPICLK1
MISO_1
MOSI_1
P1.4
P1.7
P1.6
P1.5
SPISS0
SPICLK0
MISO_0(LCD Reset)
MOSI_0
Black Dot Matrix LCD Panel
P1.1 Background Enable/Disable
P4.4
P4.5
P3.6
P3.7
/CS
ALE
/WR
/RD
EBI Interface
P0.0~P0.7
P2.0~P2.7
AD0~AD7
AD8~AD15
Table 2-1 Functional Block for Nu-LB-M051
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 5 -
2.2 Pin Assignment for Extended Connector
Nu-LB-M051 provides M0516LAN on board and the extended connector for LQFP-48 pin. Table 2-2 is the pin
assignment for M0516LAN.
Pin No Pin Name Pin No Pin Name
01 P1.5, MOSI_0, AIN5 25 P2.5, PWM5, AD13
02 P1.6, MISO_0, AIN6 26 P2.6, PWM6, AD14
03 P1.7, SPICLK0, AIN7 27 P2.7, PWM7, AD15
04 /RST 28 P4.4, /CS
05 P3.0, RXD 29 P4.5, ALE
06 AVSS 30 P4.6, ICE_CLK
07 P3.1, TXD 31 P4.7, ICE_DAT
08 P3.2, /INT0, STADC 32 P0.7, SPISCLK1, AD7
09 P3.3, /INT1, MCLK 33 P0.6, MISO_1, AD6
10 P3.4, T0, SDA 34 P0.5, MOSI_1, AD5
11 P3.5, T1, SCL 35 P0.4, SPISS1, AD4
12 P4.3, PWM3 36 P4.1, PWM1
13 P3.6, /WR, CKO 37 P0.3, RTS0, AD3
14 P3.7, /RD 38 P0.2, CTS0, AD2
15 XTAL2 39 P0.1, RTS1, AD1
16 XTAL1 40 P0.0, CTS1, AD0
17 VSS 41 VDD
18 LDO_CAP 42 AVDD
19 P2.0, PWM0, AD8 43 P1.0, T2, AIN0
20 P2.1, PWM1, AD9 44 P1.1, T3, AIN1
21 P2.2, PWM2, AD10 45 P1.2, RXD1, AIN2
22 P2.3, PWM3, AD11 46 P1.3, TXD1, AIN3
23 P2.4, PWM4, AD12 47 P1.4, SPISS0, AIN4
24 P4.0, PWM0 48 P4.2, PWM2
Table 2-2 Pin Assignment for M0516LAN
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 6 -
3How to Start Nu-LB-M051 on the Keil μVision®IDE
3.1 Keil uVision®IDE Software Download and Install
Please visit the Keil company website (http://www.keil.com) to download the Keil μVision®IDE and install the RVMDK.
3.2 Nuvoton Nu-Link Driver Download and Install
Please visit the Nuvoton company NuMicro™website (http://www.nuvoton.com/NuMicro ) to download “NuMicro™Keil
μVision®IDE driver” file. Please refer to Chapter 6.1 for the detail download flow. When the Nu-Link driver has been
well downloaded, please unzip the file and execute the “Nu-Link_Keil_Driver.exe” to install the driver.
3.3 Hardware Setup
The hardware setup is shown as Figure 3-1
Figure 3-1 Nu-LB-M051 Hardware Setup
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 7 -
3.4 Smpl_StartKit Example Program
This example demonstrates the ease of downloading and debugging an application on a Nu-LB-M051 board.
It can be found on Figure 3-2 list directory and downloaded from Nuvoton NuMicro™website following on Chapter 6.3.
Directory Project File
Figure 3-2 Smpl_StartKit Example Directory
To use this example:
The LCD will display the result of ADC on the Nu-LB-M051 board.
Start μVision®
Project-Open
Open the Smpl_StartKit.uvproj project file
Project - Build
Compile and link the Smpl_StartKit application
Flash – Download
Program the application code into on-chip Flash ROM
Start debug mode
Using the debugger commands, you may:
Review variables in the watch window
Single step through code
Reset the device
Run the application
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 8 -
4How to Start Nu-LB-M051 on the IAR Embedded Workbench
4.1 IAR Embedded Workbench Software Download and Install
Please connect to IAR company website (http://www.iar.com) to download the IAR Embedded Workbench and install the
EWARM.
4.2 Nuvoton Nu-Link Driver Download and Install
Please connect to the Nuvoton Company NuMicro™ website (http://www.nuvoton.com/NuMicro) to download
“NuMicro™IAR ICE driver user manual” file. Please refer to Chapter 6.2 for the detail download flow. When the Nu-Link
driver has been well downloaded, please unzip the file and execute the “Nu-Link_IAR_Driver.exe” to install the driver.
4.3 Hardware Setup
The hardware setup is shown as Figure 4-1
Figure 4-1 Nu-LB-M051 Hardware Setup
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 9 -
4.4 Smpl_StartKit Example Program
This example demonstrates the ease of downloading and debugging an application on a Nu-LB-M051 board.
It can be found on Figure 4-2 list directory and downloaded from Nuvoton NuMicro™website following on Chapter 6.3.
Directory Project File
Figure 4-2 Smpl_StartKit Example Directory
To use this example:
The LCD will display the result of ADC on the Nu-LB-M051 board.
Start IAR Embedded Workbench
File-Open-Workspace
Open the Smpl_StartKit.eww workspace file
Project - Make
Compile and link the Smpl_StartKit application
Project – Download and Debug
Program the application code into on-chip Flash
ROM.
Single step through code
Reset the device
Run the application
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Nu-LB-M051 User Manual
Publication Release Date: Oct. 21, 2010
Revision V1.0
- 10 -
5Nu-LB-M051 Schematic
SPI_MISO
SPI_CLK
UART_TX
UART_RX
RX
TX
SPI_SS
SPI_SS SPI_MOSI
SPI_MOSI SPI_MISO
SPI_CLK
SPI1_MISO SPI1_MOSI
SPI1_SS
SPI1_MOSI
SPI1_SS
SPI1_CLK SPI1_CLK
SPI1_MISO
VCC
R4
10K
R0603
C6
10uF/10V
TANT-A
SW1
PUSH BOTTOM
SW
AD[0..15]
AD[0..15]
PIN2PIN1 JP2
HEADER 6X2
1 2
3 4
5 6
7 8
910
11 12
PIN3
PIN9 PIN8
PIN5 PIN6
PIN4
PIN12PIN11 PIN10
PIN7
ICE_RST
ICE_RST
VCC
GND
GND
VCC
C15
820pf
C0603
ADC0
ADAVSS
ADAVSS
PIN40 AD0
PIN6
PIN18
PIN48 PWM2
PIN17
CB3
0.1u
C0603
DAVDD
PIN14nRD
PIN41
CB7
0.1u
C0603
PIN31 ICE_DAT
PIN15
PIN29 ALE
PIN30 ICE_CLK
PIN13nWR
VCC
PIN44 LCD_LED PIN46
VCC5
ADAVSS
PIN42
VCC5
PIN4ICE_RST
PIN7TX PIN8INT0
PIN5RX
PIN1SPI_MOSI
CB4
10uF/6.3V
TANT-R
PIN9
PIN20LED1AD9 PIN19LED0AD8
PIN25 LED5 AD13
PIN21LED2AD10 PIN22LED3AD11
PIN28 nCS
PIN26 LED6 AD14
PIN23LED4AD12
PIN27 LED7 AD15
PIN24PWM0
PIN35 SPI1_SS AD4
PIN36 PWM1
PIN33 SPI1_MISO AD6
PIN37 AD3
PIN34 SPI1_MOSI AD5
PIN32 SPI1_CLK AD7
PIN39 AD1 PIN43 ADC0 PIN38 AD2
U5
M052 LQFP 48
IC51-0484-806
AIN1/T2/P1.1 44
AIN2/RXD1/P1.2 45
AIN3/TXD1/P1.3 46
AIN3/SS0/P1.4 47
P4.2 48
MOSI_0/AIN5/P1.5
1
MISO_0/AIN6/P1.6
2
SCLK0/AIN7/P1.7
3
VSS
17
LDO_CAP
18
P2.0/AD8/PWM0
19
P2.1/AD9/PWM1
20
P2.2/AD10/PWM2
21
P2.3/AD11/PWM3
22
P2.4/AD12/PWM4
23
P4.0
24
P2.6/AD14/PWM6 26
P4.6/ICE_CLK 30
P4.7/ICE_DAT 31
P0.7/AD7/SCLK1 32
P0.6/AD6/MISO_1 33
P0.5/AD5/MOSI_1 34
P0.4/AD4/SS1 35
P4.1 36
P0.3/AD3/RTS0 37 P0.2/AD2/CTS0 38 P0.1/AD1/RTS1 39
RST
4
RXD/P3.0
5
AVSS
6
MCLK/INT1/P3.3
9TXD/P3.1
7
INT0/P3.2
8
SDA/T0/P3.4
10
SCL/T1/P3.5
11
P4.3
12
P3.6/WR/CKO
13
P4.5/ALE 29
P4.4/CS 28
AIN0/T2/P1.0 43
AVDD 42
VDD 41
P0.0/AD0/CTS1 40
P3.7/RD
14
XTAL1
16 XTAL2 15
P2.5/AD13/PWM5 25
P2.7/AD15/PWM7 27
ICE_DAT
ICE_CLK
ICE_CLK
ICE_DAT
PIN3SPI_CLK
PIN47 SPI_SS PIN45
PIN11SCL
PIN2SPI_MISO
PIN12PWM3
PIN10SDA
LCD_LED
LCD_LED
CB1
0.1u
C0603
DAVDD
CT1
10uF/10V
TANT-R
CB2
0.1u
C0603
VCC
CT2
10uF/10V
TANT-R
L2
L0603
ADAVSS
L3
L0603
CB6
0.1u
C0603
CT3
10uF/10V
TANT-R
U1
RT9164A-3.3v
IN
3
GND
1
OUT
2
OUT
4
VCC5
nWR
nWR nRD
nRD ALE
ALE nCS
nCS
JP4
HEADER 6X2
1 2
3 4
5 6
7 8
910
11 12
PIN13
PIN17 PIN18
PIN15 PIN16
PIN14
PIN23 PIN24
PIN19 PIN20
PIN21
PIN26PIN25
PIN22
JP3
HEADER 6X2
1 2
3 4
5 6
7 8
910
11 12
PIN28PIN27
PIN29 PIN32
PIN35
PIN31
PIN33
PIN30
PIN36
PIN34
JP1
HEADER 6X2
1 2
3 4
5 6
7 8
910
11 12
PIN37
PIN39 PIN38
PIN41
PIN45 PIN44
PIN42
PIN40
PIN43
PIN47 PIN48
PIN46
DAVDD
VR1 20K
VCC
R1
10K
PWM3 R2
10K
R0603 BZ1
2400Hz
1
2
Q1
8550
RINT1
10K
R0603
VCC
INT0
SW_INT1
PUSH BOTTOM
SW
LED[0..7]
LED[0..7]
PowerNuMicro M0516
Pin interface
ADCBuzzerReset
24LC64 3 Color LED
C14
20p
C0603
X3
12MHz
XTAL3-1
C13
20p
C0603
PIN16
EEPROM
ADDRESS:0H
SCL
I2C-EEPROM
24LC64
U4
GND
4A2
3A1
2A0
1
SDA 5
SCL 6
WP 7
VCC 8
VCC
SDA
R7
2.2K
R8
2.2K
Title
Size Document Number Rev
Date: Sheet of
<Doc> V1.0
Nu-LB-M051 (1/3)
A4
14Thursday, October 21, 2010
RRGB2 500 R0603
RRGB3 500 R0603
VCC
RGBLED1
1
2
3
4RRGB1 500 R0603 PWM1
PWM2
PWM0
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.