Nvidia Quadro K5000 User manual

NVIDIA Quadro K5000
Graphics Card
Installation Instructions for HP servers
and workstations
Overview
This document provides instructions for installing an NVIDIA Quadro
K5000 graphics card into the HP ProLiant WS460c Gen8 Graphics
Expansion Blade.
For software installation information, see the Microsoft Windows on
HP ProLiant WS460c Gen8 Workstation Blade with WS460c
Graphics Expansion Blade Administrator Guide.
Kit contents
•NVIDIA Quadro K5000 graphics card (150W)
•PCI slot cover plate
•This document
Installing the graphics card on the
workstation blade
IMPORTANT: This procedure is for replacing NVIDIA
Quadro K5000 graphics cards only on the graphics
expansion blade. The procedure for replacing graphics
cards on the workstation blade is different.
Required tools for this procedure:
•T-10/T-15 Torx screwdriver (provided inside the server)
•HP Insight Diagnostics software
To remove the graphics cards from the graphics expansion blade:
1. Power down the workstation blade.
2. Remove the workstation blade.
3. Remove the WS460c Graphics Expansion Blade access panel.
4. Remove the WS460c Graphics Expansion Blade PCIe card
cage.
5. Disconnect any power cables from the graphics card, disconnect
the retaining screws, and then remove the graphics card from the
card cage.
6. Install the new graphics card into the card cage, connect any
power cables to the graphic card, and then tighten the retaining
screws.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Part Number: 734587-001
August 2013
Edition: 1
*734587-001*
734587-001

7. Connect the WS460c Graphics Expansion Blade PCIe card
cage.
8. Install the WS460c Graphics Expansion Blade access panel.
9. Install the workstation blade into the enclosure.
10. Power up the workstation blade.
11. Download and install the latest drivers from the HP or NVIDIA
website.
For software installation information, see the Microsoft Windows on
HP ProLiant WS460c Gen8 Workstation Blade with WS460c
Graphics Expansion Blade Administrator Guide.
The installation is complete.
Documentation feedback
HP is committed to providing documentation that meets your needs. To
help us improve the documentation, send any errors, suggestions, or
comments to Documentation Feedback
(mailto:[e-mail]). Include the document title and part
number, version number, or the URL when submitting your feedback.