NXP Semiconductors MIMXRT1024-EVK User manual

QUICK START GUIDE
MIMXRT1024-EVK
Evaluation kit for the i.MX RT1024 MCU
Arm®Cortex®-M7 core at 500 MHz
4 MB flash, 256 KB RAM

2
GET TO KNOW THE MIMXRT1024-EVK
Figure 1: MIMXRT1024-EVK callouts
SD SlotSD Slot
ON/OFFON/OFF
User buttonUser button
USB OTGUSB OTG
POR ResetPOR Reset
Power SwitchPower Switch
Power SupplyPower Supply
Audio JackAudio Jack
Debug USBDebug USB
ArduinoArduino®®and Motorand Motor
Control InterfaceControl Interface
i.MX RT1024i.MX RT1024
SDRAMSDRAM
JTAGJTAG
Arduino and MotorArduino and Motor
Control InterfaceControl Interface
EthernetEthernet

3
QUICK START GUIDE MIMXRT1024-EVK
HOW TO GET STARTED
1. Connect the MIMXRT1024-EVK board to a PC
using the included micro USB cable to USB
connector J23.
2. The MIMXRT1024-EVK board comes
preprogrammed with a demo that will initiate
the LED on the board to flash when plugged
in. When the board is tilted, the green LED
gradually illuminates based on the degree of
tilt on the X-axis.
3. For more information on running the demo,
access to additional out-of-the-box demos and
to download software and tools, please visit:
www.nxp.com/MIMXRT1024-EVK/startnow.

SUPPORT
Visit www.nxp.com/support for a list of phone numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for complete warranty information.
www.nxp.com/MIMXRT1024-EVK
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their
respective owners. Arm and Cortex are trademarks or registered trademarks of Arm Limited (or its subsidiaries)
in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights,
designs and trade secrets. All rights reserved. © 2020 NXP B.V.
Document Number: IMXRT1024EVKQSG REV 0
Agile Number: 926-47106 Rev A
GET STARTED
Download installation software
and documentation at
www.nxp.
com/MIMXRT1024-EVK.