NXP Semiconductors OM-SE051ARD-H User manual

PLUG & TRUST DEVELOPMENT PLATFORM
Quick Start Guide
OM-SE051ARD-H
EdgeLock® SE051H
Arduino Compatible Development Kit

Quick Start Guide
Get toknow the OM-SE051ARD-H board
Please visit www.nxp.com/SE051H for more information.

Quick Start Guide
Jumper
Description
Configuration
Default
J6, J7
Antenna
1-2: via DB15 connector
2-3: Internal antenna
J6 1
-2, J7 2-3
(
no antenna)
J9, J10
I2C Master pull up connection
Open: not connected
1-2: 3k3 Ohm
Open
J12
Reset
1-2 RST on J11:3
2-3 RST on Arduino
2
-3
J13
SE051_ENA pin routing
1-2: ENA low, VOUT not connected to VIN
2-3: ENA controlled by Arduino pin J1:6
2
-3
J14
SE051_VCC pin routing
1-2: Routed to VDD supply voltage (see
J19)
3-4: Routed to SE_Vout pin
5-6: Routed to J11:4 pin
1
-2
J15
I2C Slave SDA
connection 1-2: Arduino R3 J4:5
3-4: Arduino R3 J2:9
3
-4
J16
SE051_Vin supply
1-2: Supplied by J11:2 pin
2-3: Supplied by the VDD (see J19)
2
-3
J17
I2C Slave SCL connection
1-2: Arduino R3 J4:6
3-4: Arduino R3 J2:10
3
-4
J18
SE051_IO2 routing
1-2: Routed to J11:9
2-3: Routed to J2:3
1
-2
J19
VDD supply voltage
1-2: From LDO
2-3: From 3V3_ARD pin
2
-3
J24
VDD supply selection for LDO
(if LDO is used
- see J19)
1-2: From 5V_PC (USBI2C flat connector)
3-4: From 5V_DB15 pin
5-6: From 5V_ARD pin
1
-2
J37, J38
I2C Slave bus pull up
configuration
Open: 3k3 Ohm (I2C fast mode)
1-2: 660 Ohm (I2C high speed mode)
Open

Quick Start Guide
Connect OM-SE051ARD-H to i.MX 8M board
MCIMX8M-EVK
Please also visit www.nxp.com/SE051H for documentation.

Quick Start Guide
Connect OM-SE051ARD-H to i.MX 8M Mini
8MMINID4-EVK
Connect OM-SE051ARD-H to i.MX 8M Nano
8MNANOLPD4-EVK
Please also visit www.nxp.com/SE051H for documentation.

EdgeLock SE051H
Visit www.nxp.com/SE051H for more
information about the SE051Hproduct
range.
SUPPORT
Visit www.nxp.com/support for a list of
phone numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for
complete warranty information.
Get Started
Download installation software
and documentation at
www.nxp.com/SE051H
Reference documents:
nxp.com: AN13539, OM-
SE05xARD Hardware Overview
www.nxp.com/SE051H
NXP, the NXP logo and EdgeLock are trademarks of NXP B.V. All other
product or service names are the property of their respective owners.
©2023 NXP B.V.
Part Number: OM-SE051ARD-H