NYMAS 250501 User manual

Installation and Operating Instructions
PI_25050X_00
L-shaped shower curtain rail with concealed fixings
Shower curtain rail - 1000 x 1000mm 250501
Available colours:
WHITE (WH). GREY (GY). DARK BLUE (DB). DARK GREY (DG). POLISHED ( SP). SATIN (SS).
Congratulations on the purchase of your shower curtain rail. This rail has been designed to provide
users with a support for shower curtains.
Warnings:
• Always read the installation, operating and maintenance
instructions.
• Due to manufacturing tolerances we do not recommend
pre-drilling fixing holes before physically receiving this
product.
• A thorough check must be carried out on receiving
delivery of this product and report any defects
immediately.
• Opening the packaging without due care and attention
could result in damage to the product or injury to
yourself or others.
• This product must be stored in a dry place, the right way
up and not stacked under other equipment on site.
• The wall on which the rail is installed must be flat and
capable of taking the load.
• Non-corrosive fixings should be used to fix this product
to the wall.
• Installation must be carried out by a qualified tradesman
using suitable fixings for the wall substrate.
• Never alter the fixing holes as this could affect the strength
and integrity of the rail.
• Improper installation / use can cause accidents and injuries.
• These instructions should be retained by the user of the
product for its whole life time.
• Do not use the rail for any purpose other than that for
which it was designed.
• Do not use the rail if damaged / not securely fixed as this
may cause injury.
• Keep plastic bag packaging away from children.
• The rail should not be subjected to impact.
• To maintain the integrity and functionality of this product,
regular cleaning and inspection is necessary.
• This rail is not designed to offer support to the user.
• If in doubt, carry out your own risk assessment for each
installation.
Shower curtain rail - 1200 x 1200mm 250502

Installation and Operating Instructions
PI_25050X_00
Installation:
Installation should be carried out by a suitably qualified
tradesman using correct fixings for the floor substrate.
Fixings are not supplied with this product to allow the
correct fixing method to be selected per installation.
Consult a fixing manufacturer if unsure of which type of
fixings to use.
1. Once the correct wall fixings have been selected, 3
x 5mm fixings should be used.
2. Offer the shower curtain rail up to the wall/ceiling
at the height/position required
3. Mark the fixing hole locations.
4. Drill holes in the wall of a diameter and depth
recommended by supplier of wall fixings.
5. Fix the ceiling stay to the ceiling flange using the
grub screw and washer
6. Push the flange covers into place
7. Always carry out a functional test after installation
and report any issues immediately.
8. Please leave these instructions with the user.
Using this product:
ALWAYS check the curtain rail is fitted securely to the wall and shows no signs of wear or damage prior to use. Please keep
these instructions in a safe place for future use. These instructions are available in braille if required.
Cleaning and maintenance:
This curtain rail must be checked regularly by a qualified personnel to ensure that it is in perfect working order. This curtain rail
can be cleaned using only a very mild detergent. Do not use acidic, alkaline, chlorine based or abrasive cleaning materials.
Disclaimer:
Nymas pursues a policy of continuing improvement in design and performance of its products and so reserves the right to
change specifications without prior notice. The information contained on this document was correct at date of issue and
dimensions are provided as a guide only. Some variation may occur due to manufacturing tolerances.
We accept no liability whatsoever for personal injury or damage to property that is or has been caused due to incorrect
assembly, installation, or use of this product. Failure to install / use this product in line with these instructions will invalidate any
warranty and may affect product safety.
Packaging:
This product is supplied in plastic wrapping and cardboard carton to keep the product unsoiled until installation. Both are suit-
able for recycling operations and should be disposed of in accordance with local recycling regulations.
Warranty:
The standard of manufacture and quality control allows Nymas to offer warranties on all products. The W symbol denotes the
number of years covered if different to the standard 1 year warranty. Where L appears this means the product is guaranteed for
life (terms and conditions apply).