
Installation and Operating Instructions
PI_343007_00
Installation:
Installation should be carried out by a suitably qualified
tradesman using correct fixings for the wall substrate.
Fixings are supplied with this product.
1. 2 fixings should be used either side.
2. Offer the product up to the position required.
3. Mark the fixing hole locations.
4. Drill the holes in the wall of a diameter and depth
recommended by supplier of wall fixings.
5. Always carry out a functional test after installation
and report any issues immediately.
6. Please leave these instructions with the user.
Using this product:
Always check this product is fitted securely to the wall and shows no signs of wear or damage prior to use. Please keep these
instructions in a safe place for future use. These instructions are available in braille if required.
Cleaning and maintenance:
This product must be checked regularly by a qualified personnel to ensure that it is in perfect working order. This product can
be cleaned using only a very mild detergent. Do not use acidic, alkaline, chlorine based or abrasive cleaning materials.
Disclaimer:
NYMAS pursues a policy of continuing improvement in design and performance of its products and so reserves the right to
change specifications without prior notice. The information contained on this document was correct at date of issue and
dimensions are provided as a guide only. Some variation may occur due to manufacturing tolerances.
We accept no liability whatsoever for personal injury or damage to property that is or has been caused due to incorrect
assembly, installation, or use of this product. Failure to install / use this product in line with these instructions will invalidate any
warranty and may affect product safety.
Packaging:
This product is supplied in a cardboard carton to keep the product unsoiled until installation. It is suitable for recycling
operations and should be disposed of in accordance with local recycling regulations.
Warranty:
The standard of manufacture and quality control allows NYMAS to offer warranties on all products. The W symbol denotes the
number of years covered if different to the standard 1 year warranty. Where L appears this means the product is guaranteed for
life (terms and conditions apply).