OAKWORKS Spa Celesta User manual

OAKWORKS®
Celesta®and Clodagh Gemini
USER MANUAL
www.OAKWORKS.com · 717.235.6807
made in the
with US & imported
Clodagh Gemini
4-Section Electric Salon Top
Shown with optional Adjustable Breast
Comfort System
Clodagh Gemini
1-Section Flat Top
Shown with optional Adjustable Breast
Comfort System
Celesta®
4-Section Electric Salon Top
Shown with optional Adjustable Breast
Comfort System
Celesta®
1-Section Flat Top
Shown with optional Adjustable Breast
Comfort System

© Copyright 2020
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical specifica-
tions and the like documentation to
ensure accuracy. The appropriate
documentation is available upon
request.
OAKWORKS®, Inc. shall not be
liable for incidental or consequen-
tial damages in connection with or
arising out of the furnishing, per-
formance, or use of this document
and the program material which it
describes.

TABLE OF CONTENTS
Important Safety Instructions
Product Use Description...................................................................................... 1
Symbol Identification ........................................................................................... 1
Important Safety Instructions............................................................................ 1-2
Product Description & Photo
Celesta 4-Section Electric Salon ......................................................................... 3
Celesta 1-Section Flat Top.................................................................................. 4
Clodagh Gemini 4-Section Electric Salon ............................................................ 5
Clodagh Gemini 1-Section Flat Top..................................................................... 6
Installation
Grounding ........................................................................................................... 7
Under Table Cabinet & In-Cabinet Power Strip.................................................... 8
Important Safety Note ......................................................................................... 8
Directions for Use
Table Keyswitch .................................................................................................. 9
Foot Control Operations
Flat Top Tables Only................................................................................... 9
Electric Salon Top Tables Only ................................................................. 10
Adjustable Body Comfort (ABC) Systems Only.......................................... 11
Hand Control Operations
Flat Top Tables Only................................................................................. 12
Electric Salon Top Tables Only ................................................................. 13
Adjustable Body Comfort (ABC) Systems Only.......................................... 14
Levelling Instructions......................................................................................... 15
Moving the Table............................................................................................... 15
Removing Top Pad............................................................................................ 16
Adjustable Body Comfort (ABC) System Use (Option)....................................... 17
Integrated Heated Top (Option)......................................................................... 18
QuickLockTM Face Rest: (Accessory Option)...................................................... 19
Arm Rest Installation and Adjustment Instructions............................................. 20
Boiance Shelf Support (Accessory Option)........................................................ 21
Cleaning & Disinfection
Recommended Cleaners/Disinfectants .............................................................. 22
Cleaning Process .............................................................................................. 22
Inspections ................................................................................................................ 23
Warranty Information ................................................................................................. 23
Model Number & Serial Number
Product Label Location...................................................................................... 24
Specifications
Permissible Environmental Conditions............................................................... 25
Electrical Specifications..................................................................................... 25
Dimensions ....................................................................................................... 25
Contact Information ...................................................................................... back cover

1
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an elec-
trical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective
Earth (Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of
manufacture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current
(DC).
This symbol is used to indicate that the operator should consult the user manual.
This symbol indicates that when the end-user wishes to discard this product, it must
be sent to separate collection facilities for recovery and recycling.
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
~
----
PRODUCT USE DESCRIPTION
The product is a cord connected spa/massage table for commercial use. It is intended for indoor use.
Maximum weight capacity of 500 lbs.
The product is intended to be used by trained professionals in a controlled environment. A review of
the following Safety Instructions is important for the safety of the operator and client. Read all instruc-
tions and understand this entire user manual before using the product. There are no known contrain-
dications to the use of this equipment.
The table should not be used in any other manner than that described within this manual. Use of any
unnecessary force or unauthorized procedures could result in injury to practitioner, client or equip-
ment.
SYMBOL IDENTIFICATION
CAUTION
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.

2
IMPORTANT SAFETY INSTRUCTIONS
The table is designed to be a stand-alone table. This table must not be modified or incorporated into any
other equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It is
the responsibility of the operator of this equipment to ensure that bystanders are not in the area below or
around this equipment during operation.
Proper operation of this equipment is very important for the safety of the operator, client, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
Weight Limit: (client and accessories) 500 lbs. (227 kg) Do not exceed.
Adjustable Breast Comfort (ABC) System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
Do not place foreign objects into the ABC System. Only use as intended. For safety of your client, use a
cloth sheet between the ABC System and your client.
Be certain that the table is completely lowered without any tilt being present prior to discharging an
ambulatory client. The client may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or
nitrous oxide.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc).
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not
recommended by the manufacturer.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled
persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at
717.235.6807.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding
Instructions in this manual.
Electrical Shock Hazard - The power supply/control module is located on the lift frame. No user
serviceable parts are inside. Refer servicing to qualified personnel. Unplug wall plug prior to contact with
any cables connected to the power supply.

Celesta
4-Section Electric Salon
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 25”-37” (63-94 cm.) Height Range
Motion 2 Powered 0-70º Backrest
Motion 3 Powered 0-30º Foot Rest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight 260 lbs. (118 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Side Arm Rests
Bluetooth Speaker
3
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch

Celesta
1-Section Flat Top
PRODUCT DESCRIPTION
STANDARD SPECIFICATIONS
Motion 1 Powered 25”-37” (63-94 cm.) Height Range
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight 240 lbs. (109 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Bluetooth Speaker
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch
4
For electrical specs, see Specifications section.

Clodagh Gemini
4-Section Electric Salon
PRODUCT DESCRIPTION
STANDARD SPECIFICATIONS
Motion 1 Powered 25”-37” (63-94 cm.) Height Range
Motion 2 Powered 0-70º Backrest
Motion 3 Powered 0-30º Foot Rest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight 260 lbs. (118 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Side Arm Rests
Bluetooth Speaker
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch
For electrical specs, see Specifications section.
5

Clodagh Gemini
1-Section Flat Top
PRODUCT DESCRIPTION
STANDARD SPECIFICATIONS
Motion 1 Powered 25”-37” (63-94 cm.) Height Range
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight 240 lbs. (109 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Bluetooth Speaker
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch
6
For electrical specs, see Specifications section.

The tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is
rated for the table. (See Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard.
Be sure access to the plug is not blocked for disconnecting the table from power.
INSTALLATION
GROUNDING
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding pin. The pin must be plugged into an appropri-
ate outlet that is properly installed and grounded in accordance with all local codes and ordinances. See
U.S. Sample below.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if it will not fit the outlet; have a proper outlet
installed by a qualified electrician.
Grounding Methods
7

The cabinet hood area under the backrest top is not
designed for storage or as an area to hold acces-
sories. DO NOT use this area for holding anything.
Damage can occur to the table, especially when the
pre-set position commands that are accessed by the
hand control are activated. Placing anything on this
area is prohibiting movement of the backrest and can
cause damage to the table or the object. Using this
area as storage will void the warranty.

TO ACCESS THE STORAGE IN THE UNDER TABLE CABINET:
The table has a fully integrated beautiful wood cabinet and base. The large under-table cabinet
provides storage for stacks of towels and other equipment. A power strip located inside the cabi-
net at the head end of the table accommodates hot towel cabinets and other accessories. This
allows you to store the unit inside with no excess cords to get in the way.
INSTALLATION
UNDER TABLE CABINET & IN-CABINET POWER STRIP
IMPORTANT SAFETY NOTE
8
CLODAGH GEMINI MODEL
Doors swing open for cabinet access
This product is equipped with an interior 120-volt 60Hz power strip. The total electrical load of equip-
󰀨
for other counties.
DANGER
CELESTA MODEL
Doors slide to the side for cabinet access

DOWN
UP
CAUTION
FOOT CONTROL OPERATIONS -
FLAT TOP TABLES ONLY
When using the table Height Up function, do not place anything between the metal frame and
the base structure as damage can occur to the table.
The Flat Top Tables offer height positioning with electronic ease. Operate the foot control as shown
below to raise or lower the height of the table.
DIRECTIONS FOR USE
FOOT CONTROL OPERATION
A table keyswitch is located inside the cabinet on the shelf at the head end of the table. This
key switch will lock-out the table and prevent all motions. It should be used to prevent unau-
thorized use. Remove the key if children have the opportunity to access the table without
adult supervision.
TABLE KEYSWITCH
9

CAUTION
FOOT CONTROL OPERATIONS -
ELECTRIC SALON TOP TABLES ONLY
The Electric Salon Top Tables offer backrest, height and footrest positioning with electronic ease.
Operate the foot control as shown below to raise or lower the backrest, height or footrest functions of
the table.
DIRECTIONS FOR USE
Footrest Down
Footrest Up
Backrest Down
Backrest Up
Height Down
Height Up
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
10

DIRECTIONS FOR USE
CAUTION
FOOT CONTROL OPERATIONS -
ADJUSTABLE BREAST COMFORT (ABC) SYSTEMS ONLY
The OAKWORKS®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the foot control.
ABC SYSTEM UP ABC SYSTEM DOWN
FLAT TOP TABLES ONLY
ELECTRIC SALON TABLES ONLY
ABC System
UP
ABC System
DOWN
ABC System
UP
ABC System
DOWN
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the ABC System.
Only use as intended. For safety of your client, use a cloth sheet between the ABC System
and your client.
11

DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
FLAT TOP TABLES ONLY
When using the table Height Up function, do not place anything between the metal frame and
the base structure as damage can occur to the table.
The Flat Top Tables offer height positioning and memory positions with electronic ease. Operate the
hand control as shown below to raise or lower the height of the table.
Use either of the top 2 buttons to orient the table in a favorite position. To store
the current position in memory, press the MEM button twice (double click). Two
audible beeps will confirm. To recall a stored position, press & hold the MEM
button.
MEMORY FUNCTION USE
Height Up Height Down
Memory 1 Function Memory 2 Function
12

DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
ELECTRIC SALON TOP TABLES ONLY
The Electric Salon Top Tables offer backrest, height and footrest positioning with electronic ease.
Operate the hand control as shown below to raise or lower the backrest, height or footrest functions
of the table.
Use either of the top 8 buttons to orient the table in a favorite position. To store
the current position in memory, press the MEM button twice (double click). Two
audible beeps will confirm. To recall a stored position, press & hold the MEM
button.
MEMORY FUNCTION USE
Height Up Height Down
Backrest Up Backrest Down
Footrest Up Footrest Down
Fully Down/Flat Position Zero Gravity Position
Memory 1 Function Memory 2 Function
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
13

DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
ADJUSTABLE BREAST COMFORT (ABC) SYSTEMS ONLY
The OAKWORKS®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the hand control.
ELECTRIC SALON TABLES ONLYFLAT TOP TABLES ONLY
ABC SYSTEM UP ABC SYSTEM DOWN
ABC System
UP
ABC System
DOWN
ABC System
DOWN
ABC System
UP
Standard
Table Func-
Standard
Table Func-
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the ABC System. Only
use as intended. For safety of your client, use a cloth sheet between the ABC System and your
client.
14

1/2” Open-end
Wrench
Leveler Foot
DIRECTIONS FOR USE
LEVELING INSTRUCTIONS
1. Place the table in the location where you plan to use it.
2. Rock the table to determine if it is level with the floor. If
the table rocks back and forth at all, the foot that clears
the floor when you rock the table will need adjustment.
3. Adjust the Leveler Foot by first loosening the locking
nut found just above the rubber Leveler Foot with the
1/2” open-end wrench.
4. Lower the adjustable rubber Leveler Foot until it meets
the floor snugly. Tighten the locking nut against the leg
of the table with the 1/2” open-end wrench to fix the
Leveler Foot in position.
5. Rock the table again to be sure adjustments have
stabilized the table. If necessary make any additional
adjustments in the same way.
Never lift the table by grasping the table top as the table top is not designed to hold the weight of
the base and you could damage the table and the electronics that run the table top.
If you need to move the table, place one person at each corner of the table. We recommend that
you have the table top in the up position (with Arm Rests removed) to have the table top ends out of
the way as much a possible. Have each person firmly grasp the cabinet base at the bottom by the
table legs and lift the table from the base. As when moving any piece of heavy equipment, bend at
the knee and lift with your legs beneath you and not with your back. Be aware and use proper, safe
procedures for moving a table of this size to prevent injury to yourself or the table. We strongly rec-
ommend that a flatbed dolly be used that can hold the entire table if moving the table involves any
large distance.
Grasp
at base
corner
Position at lowest height
CAUTION
MOVING THE TABLE
Before moving the table, disconnect the power cord from the power outlet. Secure the power cord and
all hand or foot controls before moving. The table weighs as much as 260 lbs. (118 kg.) Four people
are required to move the table safely.
15

DIRECTIONS FOR USE
REMOVING TOP PAD
The top pad has been designed to be easily removable and replaceable with no tools needed.
Thumb Screw Locations (4 per side)
1. Unscrew the thumb screw clockwise until the thumb screw is completely
removed. Repeat for all 8 thumb screws. If the thumbs screws are on too
tight, a 3/16” bit can be used.
2. Lift top pad off the platform.
IF THE TABLE HAS A HEATED TOP:
Unplug the table from the wall outlet and disconnect the wires circled from the control box located under the
platform. Pull the cables through the platform before completely removing the top pad.
TO REMOVE THE TOP PAD:
The top pad is attached to the platform with 8 thumb screws located below the platform as shown.
Heated Top Cables
16

ADJUSTABLE BREAST COMFORT (ABC) SYSTEM (OPTION)
CAUTION
• ABC System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
• Do not place foreign objects into the ABC System. Only use as intended.
• For safety of your client, use a cloth sheet between the ABC System and your client.
When turning clients over in the supine position,
you may use the cushion to level during or after
their change of position. IT is not important that
the cushion be completely level. As in prone
positions, make small changes in height and
check in with the client.
In Prone positions, for male or female clients when the face rest is in use, lower
the cushion approximately 3/4” at a time (This is approximately 1 second of
lowering) and check in with the client regarding their comfort after making the
change. Incrementally lower the cushion until the client reports they are com-
fortable. Sometimes going back up a little will be preferred. This whole process
takes no more than 15-20 seconds. After lowering, check headrest position to
ensure comfort & support. NOTE: Breast size is not the only determinate of cush-
ion location. Every person’s comfort spot is different, regardless of breast size.
If you are using the head rest in the Supine
position, you may use the cushion at relatively
high heights to facilitate stretching for short
periods of time. It is not recommended that
clients experience this position for more than
a few minutes.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts and pectoral
muscles, allowing the client to relax and create a more comfortable position for their spine. The height of the cushion is
easily adjusted up and down in small increments by using the hand control. We recommend that the cushion height be
adjusted in the following ways:
*Always start with the cushion top level with the top of the table for Prone or Supine Positioning*
PRONE POSITIONING
SUPINE POSITIONING
HEAD REST USE IN SUPINE
17
DIRECTIONS FOR USE