OAKWORKS Spa PerformaLift Series User manual

OAKWORKS®
PerformaLift Series
4-Section Electric Salon Top
Shown with optional Adjustable
Breast Comfort System
2-Section Lift-Assist Backrest Top
Shown with optional Adjustable
Breast Comfort System
USER MANUAL
www.OAKWORKS.com · 717.235.6807
made in the
with US & imported
1-Section Flat Top
Shown with optional Adjustable
Breast Comfort System

© Copyright 2020
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical
specifications and the like
documentation to ensure accuracy.
The appropriate documentation is
available upon request.
OAKWORKS®, Inc. shall not be
liable for incidental or
consequential damages in
connection with or arising out of
the furnishing, performance, or use
of this document and the program
material which it describes.

TABLE OF CONTENTS
Product Use Description......................................................................................................... 1
Important Safety Instructions
Symbol Identification ..................................................................................................... 1
Safety Instructions ......................................................................................................1-2
Product Description & Photo
4-Section Electric Salon ................................................................................................ 3
2-Section Lift-Assist Backrest........................................................................................ 4
1-Section Flat Top ......................................................................................................... 5
Installation
Grounding...................................................................................................................... 6
Directions for Use
Foot Control Operations
Electric Salon Tables Only ................................................................................... 7
Lift-Assist Backrest & Flat Top Tables Only ......................................................... 8
Adjustable Breast Comfort (ABC) Systems Only ................................................. 9
Hand Control Operations
Electric Salon Tables Only ................................................................................. 10
Lift-Assist Backrest & Flat Top Tables Only ....................................................... 11
Adjustable Breast Comfort (ABC) Systems Only ............................................... 12
Moving the Table......................................................................................................... 13
Leveling the Table ....................................................................................................... 13
Lift-Assist Backrest Adjustment................................................................................... 14
Locking Casters Use (Option) ..................................................................................... 14
Removing Top Pad...................................................................................................... 15
Adjustable Breast Comfort (ABC) System (Option) .................................................... 16
Integrated Heated Top (Option) .................................................................................. 17
QuickLock Face Rest (Accessory Option) .................................................................. 18
Adjustable Side Arm Rest (Accessory Option - Salon Only) ...................................... 19
Boiance Shelf Support (Accessory Option)................................................................. 20
Table Reset Procedure - Hand Control....................................................................... 21
Table Reset Procedure - Foot Control ........................................................................ 21
Set Zero Height ........................................................................................................... 22
Cleaning & Disinfection
Recommended Cleaners/Disinfectants ....................................................................... 23
Cleaning Process ........................................................................................................ 23
Inspections & Maintenance .................................................................................................. 24
Warranty Information............................................................................................................ 24
Model Number & Serial Number .......................................................................................... 25
Specifications
Environmental Conditions............................................................................................ 26
Electrical Specifications............................................................................................... 26
Contact Information .................................................................................................back cover

This symbol, when used in this manual and on product labels, represents a caution warn-
ing. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an electrical
shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of manu-
facture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current (DC).
This symbol is used to indicate that the operator should consult the user manual.
~
----
PRODUCT USE DESCRIPTION
Oakworks PerformaLift Series offers a variety of positioning capabilities for massage therapists and spa
professionals of all specialties. On these multifunctional professional tables the practitioner can perform
numerous protocols with ease and comfort. The fully electric PerformaLift Series is especially effective
when professional protocols require specific positioning for the client. While the client receives comfort-
able, relaxing support, the comfort level of the therapeutic professional is enhanced by superior ergonom-
ics.
It is intended to be operated by Massage Therapists in a professional environment. No special training is
required but a review of the following Safety Instructions is important for the safety of the operator and cli-
ent. The massage professional should read and understand this entire manual before use with a client.
There are no known contraindications to the use of this equipment.
The PerformaLift Series should not be used in any other manner than that described within this manual.
Use of any unnecessary force or unauthorized procedures could result in injury to practitioner, client or
equipment.
SYMBOL IDENTIFICATION
CAUTION
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
1
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
UL 2601-1
CSA C22.2 NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R

The Table is designed to be a stand-alone table. This table must not be modified or incorporated into any other
equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It is the
responsibility of the operator of this equipment to insure that bystanders are not in the area below or around this
equipment during operation.
Proper operation of this equipment is very important for the safety of the operator, client, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
Weight Limit: (Client and accessories) 550 lbs. (250 kg) Do not exceed.
Adjustable Breast Comfort (ABC) System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
Do not place foreign objects into the ABC System. Only use as intended. For safety of your client, use a
cloth sheet between the ABC System and your client.
Be certain that the table is completely lowered without any tilt being present prior to
discharging an ambulatory client. The client may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or
nitrous oxide.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc)
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not
recommended by the manufacturer.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at
717.235.6807.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions in
this manual.
Electrical Shock Hazard - The power supply/control module is located on the lift frame. No user serviceable
parts are inside. Refer servicing to qualified personnel. Unplug wall plug prior to contact with any cables con-
nected to the power supply.
2
IMPORTANT SAFETY INSTRUCTIONS

PerformaLift
4-Section Electric Salon
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 21”-37” (54-94 cm.) Height Range
Motion 2 Powered ±15º Trendelenburg/ Reverse
Trendelenburg
Motion 3 Powered 0-70º Backrest
Motion 4 Powered 0-30º Foot Rest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight*250 lbs. (113 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Locking Casters
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Side Arm Rests
3
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch

PerformaLift
2-Section Lift-Assist Backrest
4
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 21”-37” (54-94 cm.) Height Range
Motion 2 Powered ±15º Trendelenburg/ Reverse
Trendelenburg
Motion 3 Manual 0-80º Backrest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight*230 lbs. (104 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Locking Casters
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch

PerformaLift
1-Section Flat Top
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 21”-37” (50-90 cm.) Height Range
Motion 2 Powered ±15º Trendelenburg/ Reverse
Trendelenburg
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight*230 lbs. (104 kg.)
OPTIONS
Adjustable Breast Comfort System
Wood nishes
Locking Casters
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
5
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch

6
All tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated
for the table. (See Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard and where the
controls are located to your liking and are conveniently accessible.
Be sure access to plug is not blocked for disconnecting the table from power.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding pin. The pin must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances. See U.S. sample below.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
DANGER

INSTALLATION
GROUNDING
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if it will not fit the outlet; have a proper outlet
installed by a qualified electrician.
Grounding Methods

CAUTION
FOOT CONTROL OPERATIONS - ELECTRIC SALON TABLES ONLY
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
The OAKWORKS®PerformaLift Electric Salon Tables offer trendelenburg, height, backrest and footrest
positioning with electronic ease. Operate the foot control as shown below to raise or lower the trendelen-
burg, height, backrest or footrest functions of the table.
DIRECTIONS FOR USE
Height Down
Head End Down
Head End Up
Backrest Down Footrest Down
Backrest Up Footrest Up
Height Up
7

8
CAUTION For Lift-Assist Backrest Tables; Do not sit on backrest section. The hood area under the backrest top
is not designed for storage. DO NOT use this area for holding anything. Damage can occur to the
table.
The OAKWORKS®PerformaLift Lift-Assist Backrest and Flat Top tables offer trendelenburg and height
positioning with electronic ease. Operate the foot control as shown below to raise or lower the
Trendelenburg and height functions of the table.
DIRECTIONS FOR USE
FOOT CONTROL OPERATIONS -
LIFT-ASSIST BACKREST & FLAT TOP TABLES ONLY
Head End Down
Head End Up
Height Down
Height Up

DIRECTIONS FOR USE
CAUTION
FOOT CONTROL OPERATIONS -
ADJUSTABLE BREAST COMFORT (ABC) SYSTEMS ONLY
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the ABC System.
Only use as intended. For safety of your client, use a cloth sheet between the ABC System
and your client.
The OAKWORKS®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the foot control.
ABC SYSTEM UP ABC SYSTEM DOWN
FLAT TOP, LIFT-ASSIST BACKREST TABLES ONLY
ELECTRIC SALON TABLES ONLY
ABC System
UP
ABC System
DOWN
ABC System
UP
ABC System
DOWN
9

10
DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS - ELECTRIC SALON ONLY
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed
for storage. DO NOT use this area for holding anything. Damage can occur to the table.
The OAKWORKS®PerformaLift Electric Salon Tables offer trendelenburg, height, backrest, and footrest
positioning with electronic ease. Operate the hand control as shown below to raise or lower the trendelen-
burg, height, backrest or footrest functions of the table.
MEM1 MEM2
Use any of the top 8 buttons to orient the table in a favorite position. To store
the current position in memory, press the MEM button twice (double click). Two
audible beeps will confirm. To recall a stored position, press & hold the MEM
button.
MEMORY FUNCTION USE
Backrest Up Backrest Down
Memory 1 Function Memory 2 Function
Zero Gravity PositionFully Flat/Fully Down
Footrest Up Footrest Down
Head End Up Head End Down
Height Up Height Down

DIRECTIONS FOR USE
HAND CONTROL OPERATIONS -
LIFT-ASSIST BACKREST & FLAT TOP TABLES ONLY
Use any of the top 4 buttons to orient the table in a favorite position. To store
the current position in memory, press the MEM button twice (double click). Two
audible beeps will confirm. To recall a stored position, press & hold the MEM
button.
MEMORY FUNCTION USE
MEM1 MEM2
CAUTION For Lift-Assist Backrest Tables; Do not sit on backrest section. The hood area under the backrest
top is not designed for storage. DO NOT use this area for holding anything. Damage can occur to
the table.
The OAKWORKS®PerformaLift Lift-Assist Backrest and Flat Top tables offer trendelenburg and height
positioning with electronic ease. Operate the hand control as shown below to raise or lower the
Trendelenburg and height functions of the table.
Height DownHeight Down
Head End Up Head End Down
Height Up Height Down
11

MEM1 MEM2
ABC ABC
MEM1 MEM2
ABC ABC
12
DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
ADJUSTABLE BREAST COMFORT (ABC) SYSTEMS ONLY
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the ABC System.
Only use as intended. For safety of your client, use a cloth sheet between the ABC System
and your client.
The OAKWORKS®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the hand control.
ELECTRIC SALON
TABLES ONLY
FLAT TOP, LIFT-ASSIST
BACKREST TABLES ONLY
ABC SYSTEM UP ABC SYSTEM DOWN
ABC System
UP
ABC System
DOWN
ABC System
DOWN
ABC System
UP
Standard Table
Functions
Standard Table
Functions

When moving the table, place one person at each corner of the table. Have each person firmly grasp the
base at the bottom and lift the table. Be aware and use proper, safe procedures for moving a table of this
size to prevent injury to yourself or the table. We strongly recommend that a flatbed dolly be used that can
hold the entire table when moving the table long distances.
CAUTION
MOVING THE TABLE
Before moving the table, disconnect the power cord from the power outlet. The table weighs as
much as 250 lbs. (113 kg.) Never lift the table by grasping the table top. You could damage the
table and the electronics that run the tabletop. Four people are required to move the table safely.
Do not use the table to transport a client.
DIRECTIONS FOR USE
Grasp at base
corner
At low height range
1/2” (13mm) Open
end Wrench
Leveler Foot
1. Place the table in the location where
you plan to use it.
2. Rock the table to determine if it is
level with the floor. If the table rocks
back and forth at all, the foot that
clears the floor when you rock the
table will need adjustment.
3. Adjust the Leveler Foot by first
loosening the locking nut found just
above the rubber Leveler Foot with
the open-end wrench.
4. Lower the adjustable rubber Leveler
Foot until it meets the floor snugly.
Tighten the locking nut against
the wooden leg of the table with the
open-end wrench to fix the Leveler
Foot in position.
5. Rock the table again to be sure
adjustments have stabilized the
table. If necessary make any addi-
tional adjustments in the same way.
Tighten Locking NutLocking Nut
LEVELING THE TABLE
13

DIRECTIONS FOR USE
TO RAISE THE BACK REST
Raise the back rest by pressing the lever
under the head section and lifting up to
the desired height. It is recommended that
clients take some of their weight off the
back rest while you lift.
CAUTION
LIFT-ASSIST BACKREST ADJUSTMENT
Do not sit on the backrest section.
All casters should be locked during use with a client.
LOCKING CASTERS USE (OPTION)
LOCKING THE CASTERS
1. Place your foot on the end of the casters locking tab.
2. Press firmly downward until you hear a clicking noise
and the caster is locked.
UN-LOCKING THE CASTERS
1. Place your foot on top of the casters locking tab.
2. Press firmly inward and downward until you hear
a clicking noise and the caster is unlocked.
TO LOWER THE BACK REST:
Press the lever under the head section and
push the back rest down.
14

DIRECTIONS FOR USE
REMOVING TOP PAD
The top pad has been designed to be easily removable and replaceable with no tools needed.
Thumb Screw Locations (4 per side)
1. Unscrew the thumb screw clockwise until the thumb screw is completely
removed. Repeat for all 8 thumb screws. If the thumbs screws are on too
tight, a 5/32” bit can be used.
2. Lift top pad off the platform.
IF THE TABLE HAS A HEATED TOP:
Unplug the table from the wall outlet and disconnect the wires circled from the control box located under the
platform. Pull the cables through the platform before completely removing the top pad.
TO REMOVE THE TOP PAD:
The top pad is attached to the platform with 8 thumb screws located below the platform as shown.
Heated Top Cables
15

DIRECTIONS FOR USE
ADJUSTABLE BREAST COMFORT (ABC) SYSTEM (OPTION)
CAUTION
• ABC System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
• Do not place foreign objects into the ABC System. Only use as intended.
• For safety of your client, use a cloth sheet between the ABC System and your client.
When turning clients over in the supine position,
you may use the cushion to level during or after
their change of position. IT is not important that
the cushion be completely level. As in prone
positions, make small changes in height and
check in with the client.
In Prone positions, for male or female clients when the face rest is in use, lower
the cushion approximately 3/4” at a time (This is approximately 1 second of
lowering) and check in with the client regarding their comfort after making the
change. Incrementally lower the cushion until the client reports they are com-
fortable. Sometimes going back up a little will be preferred. This whole process
takes no more than 15-20 seconds. After lowering, check headrest position to
ensure comfort & support. NOTE: Breast size is not the only determinate of cush-
ion location. Every person’s comfort spot is different, regardless of breast size.
If you are using the head rest in the Supine
position, you may use the cushion at relatively
high heights to facilitate stretching for short
periods of time. It is not recommended that
clients experience this position for more than
a few minutes.
The OAKWORKS®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts and pectoral
muscles, allowing the client to relax and create a more comfortable position for their spine. The height of the cushion is
easily adjusted up and down in small increments by using the hand control. We recommend that the cushion height be
adjusted in the following ways:
*Always start with the cushion top level with the top of the table for Prone or Supine Positioning*
16
PRONE POSITIONING
SUPINE POSITIONING
HEAD REST USE IN SUPINE

Integrated heat level indicator
DIRECTIONS FOR USE
INTEGRATED HEATED TOP (OPTION)
Heating element locations
USING THE INTEGRATED HEATED TOP:
The table comes with the option for a fully integrated heated top pad. Simply press the heating indicator
located on the right side rail of the table to the desired heat level. The heat can reach up to 40°C (105°F).
Low Medium High
TROUBLESHOOTING:
1. HEAT IS NOT FUNCTIONING
Possible Causes:
• Plug is not properly plugged in
• Wall outlet is not working
• Damaged wires & terminals
Solutions:
• Ensure all power cords are properly plugged into a standard 120V or 230V wall outlet
• Ensure heating element connectors (2) are properly connected to control box.
• Check light indicator on front of the unit to ensure power is supplied. If not illuminated after
pressing it once, try plugging the table into another outlet
2. TWO & THREE BLINKING LIGHTS
Possible Causes:
• Two & three blinking lights on the control switch indicates that the heating element connector(s)
are not plugged in properly and/or damaged.
Solutions:
• Disconnect power supply to the control box (located on the underside of the table top) and wall
plug. Disconnect all heating element connectors from control box. Reconnect the heating ele-
ments first, then plug the power cord into the wall outlet
• If the problem continues, contact Customer Service at 717.235.6807
17