OBaby Condor 4s User manual

NB: Keep these instructions
for future reference!
Instructions for use
Obaby Limited
Unit I Kirton Business Park
Cleatham Road
Kirton in Lindsey
DN21 4 R North Lincolnshire
UK

Safety instructions
Read these instructions carefully before use and keep them for future reference. Failure to read these instructions may compromise
the safety of your child.
Care instructions
- The materials used to manufacture our products comply with the AZO requirement, EN71-2 and EN71-3, and light fastness
standards for textiles. Nevertheless, we advise you not to leave the product exposed to bright sunlight for any length of time. No
claims may be made for wear and tear or if the colours fade when exposed to strong sunlight. The fabric covers on this product can
be washed by hand or on a cold cycle in the washing machine (mild detergent).
- An ABC Design rain canopy is available in retail stores offering complete protection against the rain.
- All the frames on our products have been tested for conformity with EN1888 : 2005 and have met the required standards. In order
to maintain the safety of the product it is necessary to oil the moving parts or tighten the rivets as and when required.
NB: Please do not use any product for lubrication other than silicone oil or silicone spray lubricant.
- Regular care and upkeep have a major part to play in maintaining the safety and value of the product. Exposure to such things as
salt in the air, road-gritting salt or acid rain will encourage the onset of corrosion, as will inappropriate storage of the product.
- We recommend regular maintenance of all coated parts. In serious cases of soiling please clean the surface coating immediately.
- Check for loose parts and fastenings from time to time and tighten if necessary.
2
•Combination travel system with convertible attachment
•Height-adjustable telescopic handle
•Four-position backrest
•Swivel mode and locked setting on front wheels
•Hood featuring magnetic-action viewing panel
•Tested for conformity with EN 1888 : 2005
•Compatible with ABC Design “Rider” car seat
•Compatible with “Maxi Cosi Cabrio” car seat
•Compatible with “Römer Baby-Safe plus SHR” car seat
• Compatible with “Kiddie Ride-On” buggy board

NB:
- This model is suitable for infants from 6 months (from birth with carrycot) and up to a maximum weight of 15 kg.<0}
- The net bag can carry up to 2 kg.
- This pushchair is designed to transport a child.
- Do not use any accessories other than those approved by the manufacturer.
- You are advised to take your child out of the pushchair as a matter of principle when negotiating steps or flights of stairs or if the pushchair
needs to be lifted or carried.
- If you are using a carrier, ensure that it is correctly attached to the pushchair.
CAUTION:
- Do not leave your child unattended.
- Use a safety harness as soon as your child can sit independently.
- This seat is not suitable for babies under 6 months old.
- Loads attached to the handle affect the stability of the pushchair.
- Before use, check that the pushchair attachment or seat is correctly engaged in position.
- This product is not suitable for jogging or skating.
- Do not make any modifications to the product which compromise its safety.
- Keep this product away from fire and other sources of heat.
Customer complaints
- No claims may be made for natural wear and tear or for damage caused by undue demands on the product or by exceeding the permissible
load.
- No claims may be made for damage caused by improper use.
- No claims may be made for damage caused by incorrect assembly or operation.
- No claims may be made for damage caused by improper modifications to the product.
- Areas of rust may appear through lack of maintenance or improper care and do not constitute a fault with the product.
- Scratch marks are normal signs of wear and do not constitute a fault with the product.
- Mildew is likely to appear on textiles which are not dried out after getting wet and cannot be attributed to shortcomings in production
conditions.
- The product may fade if exposed to sunlight, perspiration and detergents, or if subject to abrasion or excessive washing, therefore fading
cannot be attributed to a fault with the product.
- No claims may be made for wheels which become worn out as a natural result of wear and tear.
3

1. Openin the pushchair
Pull the handle on the stroller (1) upwards until the frame clicks into place
(2).
CAUTION: Ensure that all the catches are en a ed before use.
2. Fittin the wheels
Press the button (1) and insert the rear wheel in the slot (2) until it engages.
To remove the wheels, press the button (1) to release the wheels.
The wheels can then be removed from the axle.
To mount the front wheels, push the wheels into the fittings until they click
into place.
To remove the front wheels, press the buttons on the wheel fittings and pull
the wheels out.
3. Wheel lockin and swivel settin s
Push the lever down to lock the wheels.
Push the lever downwards to set the wheels in swivel position.
4

4. Operatin the brake
Press the lever down to engage the brake.
Press the lever up to disengage the brake.
5. Attachin and convertin the seat
Attach the seat by placing it on the frame until it clicks into place.
To convert the seat, press the buttons on both adapters and lift up the seat.
6. Fittin and removin the uard rail
Fit the guard rail by inserting it in the plastic mounts on both sides.
To remove the guard rail from the pushchair, press in the buttons on both
sides and pull the guard rail off away from the pushchair.
5

7. Fittin and chan in the Comfort Set
Seat liner:
Undo the strap. For more information, follow the instructions in section 9.
Then pull the crotch belt through the opening in the seat liner.
Fix the tab on the head end of the seat liner with the Velcro fastening on the
backrest.
Sun vizor:
There are three Velcro fastenings and two snap fasteners on the sun vizor
and cover.
Fasten them together.
Guard rail cover:
Fit the cover around the guard rail and secure it in place with the Velcro
fastening.
6

8. Adjustin the le rest
To adjust the leg rest, press in the buttons on both sides and then adjust the
height.
Let go of the buttons again so that the leg rest clicks into place.
9. Fastenin the harness
To fasten the harness, push the two plastic sections (1) into the catch (2)
until they engage.
Adjust the harness to a setting where the baby is held in the correct position.
10. Unfastenin the harness
To unfasten the harness, press the middle button (offset right/left).
The harness will now open.
CAUTION: Always use the shoulder harness and lap belt together.
11. Adjustin the seat unit
To adjust the seat unit, press and hold down the catches on both sides of the
seat unit and adjust the height of the seat. When you have reached the
required position, let go of the catches to allow the seat to remain in that
position.
7

20. Adjustin the handle
Push the button upwards to adjust the height of the handle.
When the handle is at the required height, let go of the button again so that
the handle will remain locked in this position.
21. Foldin the pushchair
To fold the pushchair, bring the handle to its lowest position as described in
point 19, holding the button (1) down as you do so.
Now rotate the knob (2) to the left and push the handle down.
Now you can fold up the pushchair.
Note: To unfold the pushchair, follow the instructions in point 1 “Opening the
pushchair”.
CAUTION: Ensure that all the catches are engaged before use.
8