Office Star Products 43819 User manual

43819 MULTI FUNCTION ERGONOMIC CHAIR
OPERATING INSTRUCTIONS
1
23
5
6
4
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
FEATURES
• HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift
lever (4). To lower seat height sit on chair and lift lever (4).
NOTE: It is normal for chair to slightly lower under body weight.
• SEAT/BACK ANGLE ADJUSTMENT AND FORWARD TILT
To adjust Seat/Back angle, lift lever (3) leave lever up for free float
or push lever down to lock . For forward tilt lean back with lever (3)
in the down position and push lever (5) forward. Lift lever (3) and the
seat willl tilt forward for keyboard intensive activities.
• ARM HEIGHT ADJUSTMENT
Push button (1) in to allow the arms to move up and down freely
release button (1) when desired height is reached.
• BACK REST ANGLE ADJUSTMENT
To adjust back angle lift lever (2). Leave lever up for free float or
push lever down to lock at any angle.
• TENSION ADJUSTMENT
For individual comfort, this chair has been equiped with an
adjustment that will allow the user to change the tendsion of the
tilting feature. Turn knob (6) clockwise to increase tension & counter
clockwise to decrease or ease tension.
WARRANTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.

43819 MULTI FUNCTION ERGONOMIC CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products August 2006
PA R T QTY
1. Base .......................1
2. Casters .....................5
3. Pneumatic Cylinder ............1
4. Bellows .....................1
5. Seat Cushion .................1
6. Back Cushion ................1
7. Mechanism ..................1
8. Washer .....................1
9. Back Cushion Bolt .............1
10. Lock Washer ................1
11. Back Cushion Post ...........1
12. Allen Screw .................2
13. Phillips Head Screw ...........6
14. Mechanism Screw ............6
15. Arms Left (15L) Right (15R). . . . . 2
16. Back Support (Pre-Installed) ....1
17. Allen Wrench (Not Shown) .....1
DETAIL A
STEP 1 STEP 2
STEP 3
STEP 4
STEP 5
Remove all parts from carton, separate by part numbers
indicated on parts list, and verify part quantities.
STEP 1 Insert five Casters (2) into Base (1), push hard
until you feel or hear the Caster (2) snap into place. Insert
Pneumatic Cylinder (3) into Base (1). Slip Bellows (4) over
Pneumatic Cylinder (3).
STEP 2 Attach Seat Cushion (5) to Back Cushion Post
(11) using two Allen Screws (12). TIGHTEN SCREWS
USING ALLEN WRENCH (17).
STEP 3 Attach Arms (15L & 15R) to Seat Cushion (5)
using three Phillips Head Screws (13) for each arm. Attach
Mechanism (7) to Seat Cushion (5) using six Mechanism
Head Screws (14) with back support towards the back of Seat
Cushion (5). TIGHTEN ALL SCREWS COMPLETELY.
STEP 4 Place the assembled seat on Pneumatic Cylinder (3) and apply downward pressure.
STEP 5 Insert the Back Cushion Post (11) into Back Support (16), and secure using Back Cushion Bolt (9), Washer (8),
and Lock Washer (10). TIGHTEN BOLT USING ALLEN WRENCH (17).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
12
3
4
6
12
11
15L 15R
14 14
13
13 7
5
3
5
9,8,10
16
11
11
Phillips Screwdriver also needed
for assembly (not provided)