Office Star Products SPACE 68-50764 User manual

1
FEATURE
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (1) in to allow the arms to
move up or down freely. Release button (1) once the desired
height is reached. Slide arms forward/backward, in/out and
swivel inward.
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat, remove pressure from seat and lift lever (2). To
lower seat height, sit on chair and lift lever (2).
• BACKREST ANGLE ADJUSTMENT
To adjust back angle, lift lever (3). Leave lever up for free float,
push lever (1) down to lock.
• TILT ANGLE ADJUSTMENT
To adjust tilt angle, lift lever (2) up for free float, push lever (1)
down to lock.
• TILT TENSION ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature, Turn knob (5) clockwise to increase tension, and
counter-clockwise to decrease or ease the tension.
• SEAT SLIDER
To slide seat forward or backward, lift lever (6) and slide seat to
desired position.
68-50764 PROFESSIONAL ERGONOMIC CHAIR
OPERATING INSTRUCTIONS
5
3
2
4
6
WARNING
1. Usethisproductonlyonepersonatatime.
2. Donotusethischairunlessallboltsscrewsand
knobsaresecurelytightened.
3. Checkthatallboltsscrewsandknobsaretightevery
threemonthsorasneeded.
4. Donotoverturnbacktiltknobwhendecreasing
tension.
5. Disposeofpackingmaterialproperly.Donotuse
plasticcoverasheadcovering.Itmaycause
suffocation.
6. Donotusechairasastepladder.
7. Usethischairforitsintendedpurposeonly.
8. Usemilddetergentonlyforcleaning.
LIMITED WARRANTY
SPACE®chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons
weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism,
rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may
result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of
this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
Tomakeawarrantyclaim,contactPartsDepartmentviae-mailparts@officestar.net,byFax1-909-930-5629,ortollfreeparts
number1-800-950-7262,MondaythroughFriday8:00a.m.-5:00p.m.PacicTime.Providemodelnumberanddescriptionofthe
problemandobtainconrmationnumber.Atit’soptionOfceStarProductswill:
 (a)Supplycompatiblecomponentsofcurrentmanufacture.
 (b)Repairthecustomer’scomponent.
Itisthecustomer’sresponsibilitytoprepayfreightonanycomponentsreturnedtothefactory.Returnfreightoncomponents
coveredbywarrantywillbepaidbyOfceStarProducts.

PART QTY
1.Base....................1
2. Casters..................5
3. Mechanism...............1
4. PneumaticCylinder. . . . . . . . . 1
5. SeatCushion. . . . . . . . . . . . . . 1
6. BackAssembly . . . . . . . . . . . . 1
7. Arms(7L&7R). . . . . . . . . . . . 2
8. LongPhillipsScrew(arms). . . 6
9. ShortPhillipsScrew(mech.). . 4
10. BackSupport(Pre-Installed). 1
2
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2 Attach Arms (7L & 7R)) to Seat Cushion (5) using three Long Phillips Screws (8) for each arm.
TIGHTEN ALL SCREWS COMPLETELY USING PHILLIPS HEAD SCREWDRIVER.
STEP 3 Attach Mechanism (3) to Seat Cushion (5) with arrow pointing towards the front of the chair, secure Mechanism (3) using four Short
Phillips Screws (9), FULLY TIGHTEN ALL SCREWS COMPLETELY USING PHILLIPS HEAD SCREWDRIVER.
STEP 4 Insert Pneumatic Cylinder (4) into Base (1), place assembled seat on top of Pneumatic Cylinder (4) and apply downward pressure.
STEP 5 Insert Back Support (10) into back of Mechanism (3) and fully tighten knob.
FULLY TIGHTEN ALL SCREWS COMPLETELY USING PHILLIPS HEAD SCREWDRIVER.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
68-50764 PROFESSIONAL ERGONOMIC CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products December 2006
PhillipsheadScrewdriveralsoneededfor
assembly(notprovided)
X5
X3
X4
STEP1 STEP2 STEP3
STEP4
1
10
7R
1
7L
8
9
4
STEP5
8
X3
3
5
3
3
Knob
5
6