Office Star Products ProLine II PHT7052 User manual

PHT7052
PNEUMATIC HEIGHT ADJUSTABLE TABLE
OPERATING INSTRUCTIONS
PROLINE II LIMITED WARRANTY
ProLine II Desks are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 years from the date of purchase.
Grain, color and finishes
Variation of grain and color are natural, inherent characteristics of wood, a living material. This variation is part of the beauty of real wood and anticipated
in wood veneer furnishings. Therefore, Proline II furniture is not warranted to match in grain or color or texture. It is a natural phenomenon for wood grain to
change in color as it ages, and wood finishes are not warranted for colorfastness.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
WARNING
•Use this product only one person at a time.
•Use this product for its intended purpose.
•Do not stand on product.
•Do not use this product as a step stool or ladder.
•Do not use product unless all metal fasteners are
tight. At least every six months, check all fasteners and joints
to ensure they are tight.
•Do not modify product in any way.
•If any parts are missing, broken, damaged or worn, stop use of
the product until repairs are made using factory
authorized parts.
•Dispose of packing material properly. Do not use any packing
materials as head covering. It may cause suffocation
•Failure to follow these warnings could result in serious injury.
FEATURE
• PNEUMATIC HEIGHT ADJUSTMENT
To raise table height, lift handle (1), table will move up
gradually, release handle (1) when desired height is
reached. To lower table, with one hand push the center of
tabletop downward and lift handle (1) with other hand,
release handle (1) when desired height is reached.
1

PHT7052
PNEUMATIC HEIGHT ADJUSTABLE TABLE
ASSEMBLY INSTRUCTIONS
PHT7052
PNEUMATIC HEIGHT ADJUSTABLE TABLE
ASSEMBLY INSTRUCTIONS
PART QTY
1. Table Top ...........................1
2. Base ..............................1
3. Leg (3L & 3R) .......................2
4. Handle ............................ 1
5. Short Screw.........................4
6. Medium Screw.......................4
7. Long Screw .........................2
8. Extra Long Screw ....................4
9. Small Flat Washer ....................4
10. Large Flat Washer ...................4
11. Lock Washer .......................4
12. Leveler............................4
13. Allen Wrench .......................2
STEP 1
STEP 2
STEP 3
base support
Remove all the parts from carton, separate them into part numbers indicated on the list and make sure part quantities are correct.
STEP 1 Attach Legs (3L & 3R) to Table Top (1).
STEP 2 Secure Legs (3L & 3R) using two Large Flat Washer (10) and two Medium Screws (6) for each Leg (3). Secure Legs (3L & 3R) to brackets of Table
Top (1) using two Short Screws (5) for each Leg (3). DO NOT FULLY TIGHTEN SCREWS.
STEP 3 Attach Base (2) to Legs (3L & 3R). Gently tap base supports with a rubber mallet to ensure Base (2) is secure.
STEP 4 Fasten Base (2) to Legs (3L & 3R) using two Small Flat Washer (9), two Lock Washers (11) and two Extra Long Screws (8) for each Leg (3). APPLY
FIRM PRESSURE TO ALIGN ASSEMBLY & FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCHES (13). Screw in Levelers (12) into Base (2).
STEP 5 Attach Handle (4) to assembly using two Long Screws (7). FULLY TIGHTEN SCREWS USING ALLEN WRENCH (13).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING TABLE.
STEP 4
STEP 5
© Office Star Products July 2015
1
3R
4
7
3L
5
1
6
10
3R
3L
6
10
2
1
9
12
8
11
2
1