OfficeSource PL109 User manual

1 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
COMPONENTS
HARDWARE
MODEL: PL 109HAT
ASSEMBLY INSTRUCTIONS
C
BA
PL2013 PL109HAT PLT TOP
D
METAL LEG
C
A
B
D
JCBC Screw
M6 x 40mm = 4pcs
14
Washer = 8pcs
1
M4 x 65
Allen-Key
1 Pc
23
ALLEN CAP
Screw
M10 x 70MM
4 Pcs
4
SQUARE
PLATE 2 Pcs
6
Screw
3.5X16MM
8 Pcs
5
M10
Allen-Key
1 Pc
HARDWARE PACK WITH PL2013
E
PLDAPTHATFOOT30
®
Last Updated: 02/2021
MODEL NO. PL109
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023

Attach Metal Leg(D) to PL2013 (A) by using Allen Cap (3) and Square Plate(4).
Aligment the Metal Leg(D) before tighten the Allen Cap(3).
Attach the PL1009 (B) to PL2013(A) by
using JCBC Screw & Flat Washer(1) .
Assamble the Metal Leg(D) & attach the PLT TOP (C) to Metal Leg (D) by Screw(6).
12
3
2 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION:
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before you
start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children. If any
parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts. Failure to
follow these warnings may result in injury.
MODEL: PL 109HAT
ASSEMBLY INSTRUCTIONS
A
3
4
5
Adjust Metal Leg (D) Adjustable Glide for better alignment.
K
6
J
C
D
A
A
B
B
A
B
D
C
A
B
D
1
1
2
®
Last Updated: 02/2021
MODEL NO. PL109
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023