OfficeSource 300HL Quick reference guide

MODEL NO. 300HL
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Model #:300HLCA
Name:Veneto
Descrip�on:Execu�ve High Back Chair
Color:Caramel
Assembly & Opera�ng Instruc�ons
Please read the instruc�on sheets completely before assembly.
Maximum Weight Load: 275lbs.
Last Updated: 12/2022

MODEL NO. 300HL
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Assembly Notes
Usage Notes
1.After opening the carton, please carefully check for missing parts
and transportation damage and if needed, contact dealer immedi-
ately.
2.Once installed, the gas lift will be difficult to remove. It is not
recommended to remove the lift to avoid damage to other parts of
the chair.
3.Contact dealer if disassembly assistance is needed.
1.Intended for use indoors.
2.Intended for single person use.
3.Do not sit on end of chair to avoid accidental tipping and injury.
4.Do not step or stand on the chair – chair is intended for sitting
only.
5.Use caution when reclining, especially as tension is reduced by
user.
6.Do not lean against product – chair is intended for sitting only.
7.Avoid contact with sharp objects, heavy tools, and hot surfaces.
8.As assembly may loosen overtime, for best user safety, conduct
regular check of nuts and bolts to insure they are always tight and
secure.
9.To clean, wipe with a soft and dry cleaning cloth. If there are
stains on fabric, use a mild detergent to wipe clean and let it air dry.
Last Updated: 12/2022

MODEL NO. 300HL
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
300HLCA assembly and operating instructions
Parts list
Back with mechanism X1 Aluminum base x1
A B
KGS class 4 gas lift X1 Casters X5
C D
Last Updated: 12/2022

MODEL NO. 300HL
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Installation steps
STEP1 STEP2
STEP3 STEP4
C.
A.
D.
B.
B.
Last Updated: 12/2022

MODEL NO. 300HL
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Seat slider / Function lever located on the right hand side
of the mechanism
Adjust sliding seat so that hips and
knees are at a 90 degrees angle, it
reduces tiredness.
Pull out the hand lever for sliding
function and release when desired
position is reached
Tension tilt / Control rod located on the left hand side of
mechanism
Tension tilt offers more secure and
comfortable working environment.
Rotate forward to increase tension
Rotate backwards to release tension
Last Updated: 12/2022

MODEL NO. 300HL
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
To raise the seat,
shift your weight to your feet.
Engage actuator. Chair will rise
automatically
To lower seat,
place your full weight on the
chair, and engage actuator lever.
When the desired height is
reached, release the actuator
Height adjustment / Control rod located on the right
hand side of mechanism
Tilt lock / Control rod located on the left hand side of
mechanism
Tilt lock allows users to sit in an upright
position for keyboarding, while providing
a comfortable rocking/reclining motion
during work or break.
Pull out the control rod to unlock
tilt function and adjust, relock control
rod when desired angle reached
Last Updated: 12/2022