OfficeSource PL231T User manual

1 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
COMPONENTS
HARDWARE
MODEL: PL231T
ASSEMBLY INSTRUCTIONS
BA
PL231T PL231
JCBC Screw
M6 x 40mm = 4pcs
14
Washer = 8pcs
1
M4 x 65
Allen-Key
1 Pc
2
HARDWARE PACK WITH PL231
B
A
®
Last Updated: 02/2021
MODEL NO. PL231T
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023

Attach the PL231T (A) to PL231(B) by using JCBC Screw & Flat
Washer(1) .
1
2 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION:
MODEL: PL231T
ASSEMBLY INSTRUCTIONS
1
1
2
A
B
®
! ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
Last Updated: 02/2021
MODEL NO. PL231T
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023